Customer Questions and Answers for Bottom Door Seal by Whirlpool

Hi. Remove the lower kick panel. Remove the lower rack and use a torpedo level for leveling. Front to back on the rack rail and side to side on the opened door /tub lower area. Look underneath and make sure all 4-legs sre sung touching the floor. If the tub is not first leveled the door seal will not work. If you decide that you have opened inner dishwasher cabinet opening then yopu may decide to lower the front legs a liitle morer( 1/2-half bubble) and this tilts the front up slightly so the inner door seals agaqinst the door seal part # WP99003337. Open the door and feel the inner door raised ridge to see if there are nicks or gouges where the leak occurs. Look at the door seal as well for the same. Whipe the inner door seal area dry with a towel. Start the unit and let it run for a minute. SLOWELY open the door so you do not sling water out. Look at the inner door to see whewre the leak is and flings out the side. If there is no evidence then replace the inner door lower seal part # WP99003045. Make sure all seal area's are clean so it can seal. The door hinge does not adjust. Thank You.