William for Model Number W10823734 I purchased the W10823734 burner and switch kit for a Jenn-Air JEC9536AD Cooktop, right front burner. The posts for the new burner are labeled differently and the proper wire connections from the switch are not clear. What are the proper wire connections from both the blue and white wire harnesses from the switch to the burner posts and other areas? Also, where should the Hot Light wire connect? It connected to the old switch (8507P193-60), but it looks like it may connect to one of the new burner posts. Thank you.
Answer William, the hot light would connect to the terminal 2B on the element while the wires from the switch would go to one side of the hot light and the terminal 1B of the element. The red wire will go to the single L terminal on the thermal limiter block, the tan wire will go to the out coil terminal, the yellow wire will go to the inner coil terminal, and the red and black wired connector goes to the epic sensor on the element (may need to transfer from the original element). Read More... Answered by AppliancePartsPros.com | Tuesday, March 31, 2020