Jrg for Model Number 11062802101 Dryer heats only rarely on moisture sensing mode at normal heat. Doesn't heat at all in timed dry mode. Motor turns, drum spins, and all thermostats and temperature fuses read normal. Heater coil also reads normal (which you'd expect, since it sometimes works). What are the expected resistance readings through the temperature selector switch in each of the three positions?
Answer Hello JRG, Testing will need to be done with a multimeter when the dryer is not heating and running in a dry cycle. First, test for 120v L2 red wire to Neutral white wire at the dryer's terminal block, if the voltage is missing check terminal connections, line cord and circuit breaker. If it has the correct 120v then next at timer terminals Black to Red, if has 240v and the dryer is not heating then replace the timer. The temperature selector has a resistance range of 10 to 10k ohms depending on selection however it only controls the temperature level (low to high) when in a heat mode. Read More... Answered by AppliancePartsPros.com | Monday, July 1, 2019