Customer Questions and Answers for Temperature Selector Switch by Whirlpool

Fernando, Check the push to start switch circuit WP3395385 it should have a "momentary"circuit, when the button is depressed. also check the buzzer WP694419 it should have a rsistance reading of 1000 to 3000 ohms. In the timed dry selection, L2 power to the timer motor is supplied by the Wht/Blk wire from the motor switch. On auto dry selection, L2 power is supplied on the Orange wire from the heater element(only if or when the thermostat has reached temp.)and the timer motor advances. When the timer advances to the "cool down" cycle(the last five(5) minutes) the only closed circuit on the timer should be Black to Blue, all the other contacts should be "open" or shouldn't matter. At the end of the cycle the only "closed circuits at the timer should be TM to Orange, to advance the timer and Tan to blue , to operate the buzzer, all other circuits should be "open". If all the checks are proper, you'll need to check the red, white /black and orange wires from the motor to the heater and timer.