Customer Questions and Answers for Washer Lid Switch by Whirlpool

Bill, Here you go, " 1. Unplug washer or disconnect power. 2. Slide a putty knife under the right or left corner of the control panel. Lift the corner of the panel and push back on the knife blade to release the clip. Repeat the procedure for the other clip. 3. Rotate the control panel so that the components face the front. REMOVING THE LID SWITCH 1. Unplug washer or disconnect power. 2. Remove the control panel and position it back out of the way3. Lift the locking tab, and disconnect the main harness from the lid switch connector. 4. Remove the 5/16? hex-head screw from the green ground wire on the lid switch. 5. Lift the washer lid so it is straight up. 6. Release the locking tab and pull the lid switch up and out of the cabinet top opening." Thanks and Good Luck