Mike for Model Number DU920QWDB0 On my whirlpool dishwasher there is no power going to the inlet valve. I tested the float switch and it has continuity. I unplugged the inlet and tested the wires going to it nothing. I was wondering what the next step would be?
Answer Hello Mike. Make sure the wiring on the unit is good. If so, and the float switch is good, you will need to replace the control board WP8531292 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, March 9, 2015