Parts for Lg DLEC855W: Base And Motor Assembly Parts

This cover assembly protects internal components and helps maintain safe operation by shielding sensitive parts from debris and contact. It's a direct-fit replacement designed to restore the appliance's original protective cover. What it does:

• Shields internal electrical and mechanical parts from dust and accidental contact
• Helps prevent debris from interfering with moving components
• Restores the appliance's intended safety barrier after damage or removal
• Can reduce noise caused by loose or damaged covers when properly secured

• One cover assembly as pictured

• Disconnect power before attempting any service to avoid shock or injury
• Handle sharp edges carefully and wear gloves as needed
• Inspect mounting points and fasteners; reuse or replace screws as required

This lower cover is the replacement cabinet access panel that protects the appliance's lower components and restores a finished appearance. It keeps wiring and internal parts shielded while helping prevent debris and dust buildup. What it does:

• Covers and protects lower internal components from dust, lint and accidental contact
• Restores the appliance's exterior finish where the original lower panel was damaged or missing
• Helps maintain safe airflow pathways by keeping openings properly enclosed
• Useful when replacing a cracked, warped or otherwise compromised lower cabinet cover

• Disconnect power (unplug or switch off breaker) before beginning any work.
• Removal/installation typically requires removing a few screws; keep hardware for re-use only if undamaged.
• Handle edges carefully to avoid scratches; align tabs and fasteners before tightening.

The condenser assembly is the dryer's heat exchanger used in ventless/condensing models. It cools moist air so water can be removed, restoring efficient drying when the original is clogged, damaged, or leaking. What it does:

• Acts as the heat exchanger that condenses moisture from the circulating air during the drying cycle
• Maintains proper airflow and heat transfer through the dryer's condensing system
• Replacement may help resolve long dry times, clothes remaining damp, water pooling/leaks, or visible fin damage and heavy lint blockage

• One condenser assembly

• Disconnect power and allow the appliance to cool before servicing
• Access the condenser compartment (commonly behind the lower front service panel); note seal orientation and part routing
• Handle the new core carefully to avoid bending fins; seat fully in channels/gaskets
• Clear lint/debris from the cavity and ducts; run a short test cycle to verify airflow and check for leaks

This adjustable leg assembly raises and levels the appliance to keep it stable and reduce rocking. It provides a simple way to set appliance height for proper door alignment and smooth operation. What it does:

• Supports the appliance and transfers weight to the floor
• Allows height adjustment to level uneven floors
• Helps prevent excessive vibration, rocking, and noise
• Promotes proper door/drawer alignment and seal

• One leg assembly

• Disconnect power and empty the appliance before adjusting or replacing legs
• Raise or support the appliance safely before removing or installing the leg
• Adjust by turning the leg; tighten securely but avoid over-torquing

This coil tension spring provides the restoring force needed for the appliance component it attaches to, helping return levers or assemblies to their proper position. Replaces a worn or broken spring to restore reliable mechanical action. What it does:

• Applies tension to return or hold a moving part in place during normal operation
• Helps stabilize levers, latches, or small linkages that have become loose or saggy
• Commonly replaced when the appliance shows signs of poor return action, slipping, or intermittent engagement

• One coil tension spring

• Disconnect power and follow manufacturer safety instructions before servicing
• Inspect mating hooks, mounts, or retainers for wear and replace if damaged
• Use proper tools and retainers to avoid the spring releasing unexpectedly

This motor support bracket secures the appliance motor in place so it runs quietly and stays aligned with the drive components. Replacing a worn or damaged support restores proper motor positioning and reduces noise and vibration. What it does:

• Holds the motor housing steady to prevent excessive movement during operation
• Maintains motor alignment with the drive system to reduce belt/drum wear
• Can help stop rattling, grinding, or intermittent noise caused by a loose motor mount
• Supports stable rotation that helps prevent premature component wear

• One motor support bracket

• Disconnect power before beginning any repair to avoid shock or injury
• Inspect surrounding mounts, fasteners and motor for damage while replacing the bracket
• Reuse OEM fasteners or replace with equivalent hardware and torque to factory specs

The Blower Wheel is an OEM part for LG electric clothes dryers. It is the circular fan component located inside the dryer that works to circulate air through lint filter screens and over clothes during drying cycles. The turning blower wheel helps distribute even, consistent airflow for fast and efficient drying.  

Symptoms of a bad blower wheel include:

• Excessively long or ineffective drying times
• Wet or damp clothes after an entire cycle  
• Loud vibrating or grinding noises coming from inside the dryer cabinet
• Reduced or absent airflow

Causes can be from normal wear and tear over time, clogs of lint buildup obstructing rotation, or damage. Replace your blower wheel with this OEM LG part to restore optimal drying performance. It is also compatible with Sears/Kenmore electric dryer models for years of reliable service.

This DC motor assembly replaces a failed dryer drum motor to restore drum rotation and normal tumble. Designed to mount in the dryer cabinet and drive the drum for regular drying cycles. What it does:

• Turns the dryer drum so clothes tumble and dry evenly.
• Fixes symptoms like no tumbling, intermittent or failed rotation, or loud/grinding noises from the motor area.
• Ensures proper drum movement for airflow and efficient drying when installed correctly.
• Works with the dryer's wiring harness and mounting points to integrate with the machine's drive system.

• Disconnect power before beginning service; for gas dryers also shut off the gas supply.
• Handle wiring connectors gently; match connector positions and secure all mounts and fasteners.
• Inspect drum rollers, belts, and idlers while the cabinet is open — these components can affect motor load and longevity.

This poly-V drive belt transfers power from the motor to rotate the drum. Replace a stretched or broken belt to restore smooth, dependable tumbling or spinning and reduce slippage or noise.

• Drives the drum by linking the motor pulley through the idler/tensioner system
• Maintains traction for consistent rotation during cycles
• When worn or broken, symptoms include: drum won't turn though motor runs, squealing/chirping, burning rubber smell, or visible fraying/cracks
• Restores proper drum movement and reduces strain on the motor

• Disconnect power before servicing; allow the appliance to cool
• Access the belt by removing panels as directed for your model; note routing before removal
• Release tension at the idler, install the new belt with ribs oriented correctly, and route around motor and idler pulleys
• Spin the drum by hand to seat the belt and verify alignment before reassembly and testing

Replacement blower impeller that directs airflow through the appliance's ventilation path to help restore proper air movement. Use this impeller to address weak airflow, longer dry times, or unusual blower noise. What it does:

• Directs air through the appliance's blower housing and vents to maintain designed airflow.
• Restores airflow when a worn or damaged impeller causes reduced air movement and longer cycle times.
• Reduces rubbing, vibration, and squealing that can occur from cracked or misshapen impeller blades.

• Disconnect power (unplug or turn off circuit breaker) before starting any repair.
• Access may require removing the dryer cabinet or blower housing.
• Inspect the blower housing and mounting hardware; replace any broken clips or fasteners for proper fit and alignment.
• Test operation after installation and reassemble panels securely before returning the appliance to service.

The Drain Pump Assembly is an OEM part for LG dryers. The drain pump is responsible for pumping water out of the dryer drum.

Causes of a bad drain pump can include clogging or blockage from lint buildup, damage to pump components from excessive moisture or corrosion over time, or worn out motor that has exceeded its lifespan.

Symptoms of a bad drain pump include:

• Wet clothes at the end of the cycle
• Excess moisture inside the dryer drum
• Standing water at the bottom of the dryer
• Strange noises or vibration coming from the pump area

This LG part is also compatible with some Kenmore models.

This blower cover protects and secures the dryer/blower assembly, directing airflow and helping keep internal components free of lint and debris. It restores proper airflow routing and reduces risk of contact with the spinning blower. What it does:

• Houses the blower wheel and channels exhaust air through the vent path
• Protects the blower assembly from lint buildup and foreign objects
• Helps prevent rubbing or contact that can cause noise or premature wear
• Supports proper airflow to improve drying performance when installed correctly

• Disconnect power before service to avoid shock or injury
• Access may require removing the dryer cabinet or access panel; handle internal components with care
• Verify alignment around the blower wheel and secure fasteners to prevent rubbing or air leaks
• If you find damaged seals, fasteners, or the blower wheel, replace those parts as needed

This dryer stacking kit lets you securely mount a dryer on top of a compatible front-load washer to save floor space and create a stable stacked laundry pair. Designed to match factory mounting points for reliable fit and function. What it does:

• Provides a rigid bracket system that positions and secures the dryer on top of the washer
• Helps prevent shifting, tipping, and excessive vibration when properly installed
• Enables safe stacked installation where the washer and dryer are compatible
• Useful when replacing a lost or damaged factory stacking bracket or mounting hardware

• Follow the OEM installation instructions exactly and confirm compatibility before installing
• Install with two people to safely lift and align the dryer onto the washer
• Disconnect electrical power (and gas, if applicable) to appliances before starting work
• Use only the provided hardware and mounting locations; improper installation can cause instability