Parts for Frigidaire FCFG3062ABB: Body Parts

This mounting bracket secures internal components to the cabinet or chassis, restoring proper alignment and support in affected appliances. It's a direct-fit replacement designed to match the original part's shape and mounting points. What it does:

• Provides a stable mounting point to hold panels, rails, or assemblies in place
• Restores proper alignment to prevent rattling, sagging, or misaligned doors/panels
• Replaces worn, bent, or broken brackets that can compromise component support
• Compatible with the OEM mounting locations and fastener pattern for correct fit

• Remove power to the appliance before beginning any repair
• Use appropriate hand tools; avoid overtightening fasteners to prevent stripping
• Keep original fasteners and hardware; replace any damaged fasteners as needed

This replacement cover protects internal components and restores your appliance's finished appearance. It fits the factory location to keep parts shielded from debris and accidental contact. What it does

• Replaces a cracked, broken or missing cover to stop exposed components and reduce risk of damage
• Helps prevent debris and moisture from entering internal areas that can cause malfunctions
• Eliminates rattles or vibration caused by a loose or damaged housing piece
• Restores a clean, finished look to the appliance exterior

• Disconnect power to the appliance before starting any repair
• Basic hand tools such as a screwdriver may be required; keep fasteners from the original part for reuse if in good condition
• Handle part carefully to avoid scratching the finished surface during installation

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

• Fastens components to maintain proper alignment and stability
• Helps prevent vibration, rattling, and loose parts during operation
• Replace if threads are stripped, the head is damaged, or the screw is missing
• Commonly used to mount internal or exterior parts in ranges and wall ovens

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Use the correct driver bit to avoid stripping the screw head
• Install in the original location and do not overtighten
• If the receiving threads are damaged, repair or replace the mating part before installation

The Rack is an OEM replacement part for Frigidaire wall ovens. It is designed to provide a stable and secure surface for placing cookware and bakeware inside the oven.

Causes of a bad rack can include warping or bending from exposure to high oven heat over extended use. Heavy pots or pans dragged across rack surfaces may puncture or dent racks over time.

Symptoms of a bad rack include:

• Difficulty smoothly sliding racks in or removing them from the oven
• Sagging or unstable surfaces that may compromise food placement
• Rust or corrosion on the rack

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models

This door gasket is a direct-replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce energy loss. It restores proper sealing around the door for more consistent internal temperatures. What it does:

• Forms a tight seal around the refrigerator door to help prevent warm air intrusion and frost buildup
• Helps maintain consistent internal temperatures for better food preservation
• Reduces compressor run time caused by a leaking door seal
• Addresses common symptoms like visible gaps, cold air loss, or condensation at the door edge

• One replacement refrigerator door gasket

• Turn off power to the appliance and empty the door prior to replacing the gasket
• Remove the old gasket carefully to avoid damage to the door finish or mounting channel
• Warm and flex the new gasket as needed for easier installation and to help the gasket seat properly

This replacement switch restores reliable control of a selected function by opening or closing an electrical circuit inside your appliance. When the original switch wears out, buttons may stop responding or features may not activate consistently.

• Opens/closes an electrical circuit when the button/actuator is engaged
• Routes power or sends a signal to the control or component
• Common symptoms: no response when pressed, intermittent operation, or function won't start
• May show signs of heat damage, loose terminals, or inconsistent "click" feel

• Disconnect power at the breaker before servicing
• Photograph or label wire positions to ensure correct transfer to the new switch
• Move wires one at a time; fully seat connectors on the correct terminals
• Reassemble, restore power, and test the function activated by the switch

This lamp assembly replaces a refrigerator interior light to restore safe, visible illumination for food storage areas. It provides a direct-fit housing and socket that mounts where the original interior lamp was installed. What it does:

• Houses and secures the refrigerator interior light so the compartment stays illuminated.
• Provides the electrical connection and socket for the interior lamp bulb.
• Common fix for lights that flicker, fail to turn on, or have a loose or damaged housing.
• Helps restore normal visibility for loading, unloading, and inspecting contents.

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the lens and bulb carefully to avoid breakage; replace the bulb if damaged.
• Use basic hand tools; avoid forcing fasteners—align tabs and clips to seat the assembly.

This shield is a small protective mounting plate that helps protect internal components from heat, debris and abrasion. It restores proper component clearance and prevents contact-related wear for safer, quieter operation. What it does:

• Covers and protects nearby components from heat and debris buildup
• Maintains correct spacing to prevent rubbing, chafing or noise
• Helps prevent damage that can lead to intermittent operation or visible wear
• Fits into the appliance's body where the original shield mounts

• One replacement shield

• Disconnect power before starting any repair to avoid shock or injury
• Remove the outer panel(s) as needed to access the mounting area; retain original fasteners
• Inspect adjacent parts for wear while installing the new shield

This temperature-sensing probe measures internal appliance temperature and sends readings to the control board so the unit can maintain correct cooling or defrost cycles. Replaces a failed or damaged probe to restore temperature feedback. What it does

• Detects internal temperature and relays it to the control board for accurate cooling and defrost control
• Can cause temperature drift, excessive run times, or failed defrost cycles when faulty
• May trigger temperature-related error codes or cause food to become too warm or too cold
• Works as the control system's feedback element; compatible with the original connector style

• Disconnect power before installing to avoid shock or damage
• Handle the sensor tip and wiring gently; avoid kinking or pulling the lead
• Ensure the connector is fully seated and routed away from moving parts or heating elements

This power cord supplies electrical power to the appliance, restoring a safe, factory-style connection between the outlet and the unit. Use it to replace a damaged or worn lead to regain reliable power. What it does:

• Replaces a worn, frayed or damaged power lead to stop intermittent power or visible cord damage
• Restores a secure electrical connection when the original cord is cut, melted or has exposed wires
• Helps eliminate power-related failures caused by broken conductors or loose cord terminals
• Works as the external mains connection between the appliance and household power

• One power cord

• Always unplug the appliance or switch off house power at the breaker before replacing the cord
• Verify the cord's terminal type and wire count match your appliance before installation
• Tighten terminal connections to the manufacturer's specified torque and secure strain relief where provided

Note: ONE screw only, order as needed.

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

The Terminal Block Kit is an OEM replacement part for Frigidaire stoves. It includes all the necessary terminals needed to ensure connections are securely made in the stove's electrical system. As a distribution point, the terminal block facilitates connections between internal stove components and external power.  

Causes of a faulty terminal block can include worn terminals that no longer grip wires firmly, or compromised insulation that allows shorts over time. Without proper connections, stove functions may be disrupted.

Symptoms of a bad terminal block include:

• Intermittent or complete burner/oven failures  
• Buzzing or humming electrical noises
• Tripped circuit breakers or blown fuses
• Visible damage or corrosion on terminal connections

It is compatible with Electrolux, Gibson, Kelvinator, and Kenmore branded models as well.

This blower motor assembly circulates air through the evaporator and freezer compartment to maintain even cooling and proper frost control. Replacing a worn motor restores airflow and helps keep temperatures consistent. What it does

• Spins the evaporator fan to move cold air through the freezer and refrigerator sections.
• Restores proper airflow when the fan motor is worn, noisy, or not running.
• Helps prevent warm spots, frost buildup, and longer run cycles caused by poor circulation.
• Reduces abnormal noise from a failing blower motor or imbalanced fan blade.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blade carefully to avoid bending or damage; keep fingers and tools clear while testing.
• After installation, verify the fan spins freely and the appliance returns to normal temperature and noise levels.

This anti-tip kit secures a freestanding range or slide-in oven to help prevent the appliance from tipping forward, improving safety during normal use. Installs at the appliance base to anchor the unit to the floor or wall. What it does:

• Anchors the range to the floor or wall to reduce the risk of tip-over when the oven door or storage drawer is opened.
• Stops the appliance from rocking or shifting during normal use or when heavy cookware is placed on the open door.
• Provides a simple mechanical safety anchor recommended after installation, floor changes, or appliance relocation.

• Anti-tip bracket and mounting hardware.

• Follow the OEM installation instructions exactly; mount to the floor or wall surface specified by the manufacturer.
• Use proper anchors for your floor or wall type (masonry anchors or wood screws as appropriate); if the provided fasteners are not suitable, obtain the correct anchors.
• Disconnect power and move the appliance per OEM guidance before attaching the bracket.

A replacement wiring harness that routes power and signals between the control and key fridge components, restoring electrical connections so circuits operate reliably. Fits into the appliance's factory connector locations for a direct swap-in repair. What it does

• Carries power and control signals between the control board, compressor, sensors and other components.
• Replaces damaged or frayed wiring that can cause intermittent operation or loss of function.
• Helps stop shorts, blown fuses, or components that won't receive power when the harness is faulty.
• Restores reliable connector fit and insulation where terminals or wires are corroded or broken.

• One wiring harness as pictured.

• Disconnect power (unplug or shut off breaker) before starting—electrical shock hazard.
• Secure harness with existing clips or ties; avoid pinching or routing near sharp edges or heat sources.

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This factory screw secures components in your appliance, restoring a tight, rattle-free fit. Replace missing or damaged hardware to keep panels, brackets, and trim properly fastened and aligned for safe, reliable operation.

• Secures panels, brackets, trim, or internal components to the chassis
• Replaces lost, rusty, stripped, or cross-threaded screws
• Helps eliminate looseness, gaps, and vibration/rattling
• Common signs: loose/misaligned panels or trim, rattling noises, missing or rounded screw heads

• Disconnect power (and shut off gas if applicable); allow the unit to cool completely
• Match to the original location and replace one at a time to maintain alignment
• Hand-start to prevent cross-threading; tighten snugly—do not overtighten
• Use light torque when threading into plastic or thin sheet metal