Parts for Ge ZTS90DPSN1SS: Body Parts

Seals oven door to prevent heat loss and ensure even cooking. Replace if you notice excessive heat escaping, uneven baking, or visible damage. Confirm fit by model number.

Fixes oven not heating after self-clean cycle. This thermal safety switch cuts power when temperatures get too high. Simple diagnosis with continuity test.

This air center divider is the interior air baffle that directs airflow inside the refrigerator compartment for more even temperature control and circulation. It replaces a cracked, missing, or damaged center air divider to restore normal airflow paths. What it does:

• Guides cooled air through the refrigerator compartment to help maintain even temperatures
• Prevents air leaks and improper circulation caused by broken or warped dividers
• Helps reduce warm spots and uneven cooling inside the fresh-food section
• Restores proper airflow after impact damage or plastic fatigue

• One air center divider

• Disconnect power to the appliance before starting any work
• Remove shelves and related trim to access the center air baffle; retain all fasteners
• Handle plastic tabs/clips gently to avoid breakage during removal and installation

Replace a worn or broken right-side oven rack guide to restore smooth rack movement and stable support. Prevents binding and keeps racks aligned.

Left-side oven rack guide supports and aligns your oven rack for smooth sliding. Replace if cracked, broken, or worn to restore stable rack movement.

This flat 30" oven rack restores the proper cooking surface in your range, giving even support for cookware and bakeware. It replaces bent, warped or missing racks so pans sit level for better results. What it does

• Provides a flat, stable shelf for baking sheets, pans and dishes
• Replaces damaged or warped oven racks that cause uneven cooking or tipping
• Slides into existing rack supports to restore correct shelf positions
• Helps maintain airflow for even heat distribution when used as intended

• Allow the oven to cool completely and disconnect power before installing
• Slide rack into the desired pair of oven support rails until fully seated
• Inspect support rails for damage and ensure the rack moves smoothly
• Clean oven interior and the rack per the manufacturer's cleaning instructions before use

Replace worn rack slides to restore smooth glide on 30" electric ovens. Fix sticking, binding, or sagging racks. Verify fit with your model number.

Oven not heating or baking unevenly? This hidden bake element kit restores proper heating. Includes element, bracket, and wiring for complete repair.

Oven won't brown or broil food? This upper broil element restores focused top-side heat for proper browning and broiling. Common 30-minute repair.

Fix F2 or F34 error codes and inaccurate oven temperatures with this temperature sensor assembly. Moderate DIY repair, 30-60 minutes install time.

Retainer bolt secures internal components and panels in your range or wall oven. Replace if bolt is stripped, missing, or causing loose assemblies.

Halogen bulb illuminates your oven cavity so you can monitor cooking without opening the door. Replace when dim or burnt out. Verify fit with your model.

Replace your wall oven's halogen light assembly when the bulb burns out or flickers. Restores interior lighting for safe cooking. Verify fit with your model.

Halogen light assembly illuminates your oven cavity during cooking. Replace if light won't turn on, flickers, or glass is cracked. Confirm fit by model.

Replace your oven light lens cover to restore interior lighting. Install when cracked, discolored, or missing. Confirm fit with your model number.

Replaces the lower front vent trim on your wall oven. Restores proper airflow appearance when the original is cracked, broken, or missing.

Decorative trim piece for the lower edge of your wall oven where it meets cabinetry. Replace if cracked, damaged, or missing to cover gaps and restore a clean look.

Left vertical brace for wall oven side panel support. Replaces cracked, bent, or missing braces. Provides structural reinforcement for cabinet.

Oven meat probe not working or wire exposed? This thermistor monitors interior temperature for accurate cooking. Common DIY fix, installs in minutes.

Heat escaping around broil element? This pass-through gasket seals the opening where the element enters the oven liner, containing heat and steam. Quick DIY fix.

Broiler not heating evenly or element looks damaged? This broil element trim restores proper heating in your wall oven. Moderate DIY repair.

This cover duct protects and conceals a dryer/vent duct opening, keeping the ductwork stable and helping prevent debris or loose insulation from entering the airflow path. It restores a clean, finished appearance. What it does:

• Covers and protects the exposed duct opening behind the appliance or in the cabinet
• Helps keep lint, dust, and debris out of the ductwork
• Reduces rattling or vibration from loose duct edges
• Restores a finished look after repair or replacement

• One cover duct

• Turn off and unplug the appliance before beginning any work
• Remove any access panels or obstructions to reach the duct area; basic hand tools typically required
• Align the cover over the duct opening and secure with the original screws or fasteners

Directs cold air through the lower refrigerator cabinet. Replaces a cracked, broken, or missing duct cover to restore proper airflow routing.

Shields your oven's hidden bake element from spills and debris. Directs heat for even cooking and reduces cleaning. Moderately easy DIY install.

Replacement inner top plate for wall oven ceiling. Restores interior surface, protects wiring and insulation from heat and drips. Needed when cracked or worn.

Oven not reading meat temperature accurately? This meat probe and harness assembly monitors internal food temperature during cooking cycles.

Replacement rack guide nut for wall ovens. Secures oven rack guides in place. Order a new nut if yours is stripped, broken, or missing from the cavity.

Replacement washer for ranges and ovens. Used to secure components and provide even fastening. Replace if cracked, worn, or missing during repairs.

Replacement mounting nut for ovens and ranges. Secures internal components and panels. Order a new nut if yours is stripped, missing, or damaged.