Parts for Craftsman 917204140: Brake / Lift Parts

This replacement part is a shaft lift and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is an important part of many appliances and is used to adjust the left settings so that it is to the user's liking.A new shaft lift might be needed if the current one is damaged or broken in any way including being bent, cracked, or chipped. This part can become worn down due to normal wear and tear and it is not unusual that it be replaced. Be sure the engine is completely powered off before starting a repair. Refer to the specific owner's manual for more specific instructions on replacing this part. This shaft lift is sold individually. This is a genuine OEM replacement part and is sourced directly from the manufacture. This ensures proper fit in many different appliances.

This part is a replacement deck lift shaft spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, bent, or otherwise defective deck life shaft spring in lawn tractors.The deck lift shaft spring is part of the system that moved the lift shaft. This enables the user to adjust the lawn tractor's deck. With regular equipment use, this spring can become corroded, bent, stretched, or otherwise damaged. If this occurs, this part will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this deck lift shaft spring, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This deck lift shaft spring can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

This replacement part is a rear suspension link. It is a genuine replacement part made by Husqvarna. Rear suspension links are used to connect or link the two ends of the suspension components in many machines. This allows movement between different parts so that the engine works properly. A new suspension link might be needed if some parts are no longer working together. This can be because the suspension link has become detached or damaged and should be replaced. Be sure to wear working gloves to replace this part. It is also recommended that the engine be cooled down before replacing this link.This part is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually and intended for use in different types of lawn mowers.

This replacement part is a bracket link assembly. This is a genuine replacement part made by Husqvarna. This part is able to connect certain parts within the equipment to ensure things are secure and stable during use. A new bracket link assembly might be needed if the current one is missing or has become damaged in any way. If the bracket is unable to stay attached to the machine, it might be best to replace it. It is also possible that the bracket can become stripped over time and can no longer function properly. Be sure to refer to the user manual for more information on how to replace this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This suspension mower arm is a genuine Husqvarna part, sold individually. This suspension mower arm can be used as a replacement part or a lawn tractor. The purpose of the suspension mower arm is to absorb the shock impact generated when the appliance is driven on bumpy ground.The suspension mower arm might have to be replaced if there is damage that renders the component beyond functionality. If the suspension mower arm is punctured, cracked, scraped, or eroded over time from general wear and tear or if the component is subject to a direct impact with a hard object that warps it, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This suspension mower arm is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Weed Eater.

This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This replacement part is a hair pin and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Hair pins are an important part of many different types of machinery as they hold other parts in place and secure. A new hair pin might be needed if the current ones are loose or missing. It is common that hair pins might become stripped overtime and will need to be replaced. Be sure to double check the size of the hair pin as many places on lawn equipment will require different sizes of this part. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This nut is a genuine Husqvarna part that is manufactured as a replacement part compatible with lawn mowers. This nut is a crown lock nut on the lift link. The lift link is located on the front of the mower deck and connects under the front axle to the bracket. It works to help in leveling the deck down and up. This is a special type of lock nut.The most common reason that this component is needed is if the nut becomes stripped in the process of making another repair.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Husqvarna and may also be compatible with AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, Redmax, and Weed Eater.

This replacement part is a nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different machines. Nuts are responsible for holding other parts in place and secure so that everything can operate smoothly and efficiently while in use.A new nut might be needed if the current one is damaged in any way or missing. This repair should be fairly easy and might only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before beginning to replace this part. This nut is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. Be sure to purchase the correct amount as many appliances require more than one.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.