Parts for Kitchenaid KUIX335HWH00: Cabinet, Door And Liner Parts

Replace missing or stripped mounting screws in your refrigerator or ice maker. 8-18 x 1 1/4 inch screw secures panels and components inside the unit.

Replacement mounting spacer for ice makers. Maintains proper clearance and alignment between components. Replace if cracked, broken, or missing.

8-18 x 1/2 inch mounting screw for refrigerators, washers, dryers, and other appliances. Replace stripped, missing, or damaged screws during repairs.

Replacement door cam for freestanding ice makers. This plastic cam component controls door operation. Order a new one if your original is cracked or broken.

Ice maker door won't stay closed or seal properly? This door catch assembly restores secure latching to maintain proper temperatures and operation.

Ice not freezing properly or melting too fast? A worn door gasket lets warm air in. This 15-inch seal restores proper insulation in about 20 minutes.

Restores your ice maker's front appearance and protects internal components. Replace if dented, cracked, or cosmetically damaged. Verify fit with your model.

Door hinge for ice maker service door and bin compartment. Replace if hinge is broken, cracked, or worn. Mounts access points for proper door alignment.

Replace your ice maker's outer housing cover to restore protection and appearance. Shields internal components from damage. Verify fit with your model.

Replacement mounting screw for ice makers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Leaking ice maker or water pooling underneath? This drain tube routes wastewater away from your unit. Fixes cracked or clogged drain lines in 20 minutes.

Missing or damaged ice scoop? This replacement scoop fits most ice makers and provides sanitary ice retrieval. Measures 4" x 10.5" for easy handling.

Replace a cracked, loose, or missing door handle on your ice maker. This handle restores a secure grip for opening and closing the door smoothly.

Secures flexible tubing to fittings on water and drain lines. Replace when clamps lose tension or you find leaks. Confirm fit with your model number.

Replacement screw for ice maker assembly. Secures internal components and panels. Needed when original screws are stripped, missing, or damaged during repair.

Replacement door hinge for freestanding ice makers. Secures the door panel and allows smooth opening and closing. Needed when hinge is cracked or broken.

Replace missing or stripped 12-24 x 1/2 in. screws that secure panels, brackets, and internal components. Restores tight fit and reduces rattles.

Secures door hinge to cabinet for proper alignment and sealing. Replace if missing, stripped, or loose to restore smooth operation. Confirm fit by model.

8-32 x 1/2 inch mounting screw for refrigerators. Secures panels, brackets, and components. Replace lost, stripped, or corroded screws.

Adhesive-backed identification label displaying model and serial numbers. Restores clear product ID when original nameplate is faded, peeling, or missing.

10-32 x 1/2 inch pan head machine screw secures panels, brackets, and internal components in ice makers. Replaces missing or damaged screws.

Secures panels, brackets, and trim in dryers, washers, and ice makers. Replace worn, stripped, or missing screws to restore proper fit and alignment.

Replacement scoop holder that mounts on the ice maker door to keep your ice scoop secure and accessible. Replaces broken or missing holders.

Adjustable leveling leg threads into dishwasher base to set height and stabilize cabinet. Replace worn, missing, or stripped legs to stop rocking.

This replacement group top panel restores the finished surface around the range's cooktop and control area, improving appearance and protecting internal components from spills and debris. Fits the factory mounting points and finish. What it does

• Replaces a cracked, chipped, or dented group top that exposes internal parts
• Covers and supports control and switch openings for a finished look
• Helps prevent spills and crumbs from entering the control cavity
• Restores proper alignment where bent or damaged panels cause binding or gaps

• Disconnect power to the appliance before starting any disassembly
• Handle painted and glass surfaces carefully to avoid scratching the finish

Fix a cracked or warped ice maker door that won't seal properly. This front door assembly restores proper closure and temperature control for your unit.

The Grille is an OEM part for Whirlpool standalone ice makers. It is the outer covering that protects and secures the entire ice making assembly. 

Causes of a bad grille can include impact or handling damage over time. Punctures, dents, or cracks allow for potential leak points or entry of contaminants that can disrupt operations.

Symptoms of a bad grille include:

• Water or moisture inside the ice maker assembly 
• Decreased ice production or output over time
• Loose or improper fitting of the grille on the unit
• Rattling or noises from an improperly secured grille

This OEM part is also compatible with models made by Kenmore, Frigidaire, and KitchenAid. 

This replacement screw secures panels and components on compatible Whirlpool appliances, restoring proper fit and reducing rattles or loose trim. It's sized for appliance sheet-metal and trim fastening and matches the OEM finish for visible areas. What it does:

• Fastens panels, brackets, trims and small components to prevent movement and vibration
• Helps restore proper alignment and reduces rattling or gaps caused by missing or damaged fasteners
• Fits standard 8-18 threads with a 1.00 in. shank for common appliance mounting points
• Matches white finish for a discreet appearance on exposed areas

• Disconnect power and remove any access panels before working on the appliance
• Use the proper driver (Phillips or specified head) and start threads by hand to avoid cross-threading
• Tighten firmly but avoid over-torquing to prevent stripping or damaging sheet-metal
• Replace all like fasteners for even fit and alignment

Replacement screw for securing refrigerator panels, brackets, and trim pieces. Needed when original fasteners are missing, stripped, or damaged.

Top articulated hinge assembly for freestanding ice makers. Replaces worn, cracked, or broken hinges on the ice maker lid or door. Essential hardware.

Replaces worn bottom hinge assembly to restore smooth door movement and proper alignment. Install when doors sag or don't seal evenly. Verify fit with your model.