Parts for Whirlpool GI15NDXXS0: 01 - Cabinet Liner And Door Parts

Replace missing or stripped mounting screws in your refrigerator or ice maker. 8-18 x 1 1/4 inch screw secures panels and components inside the unit.

Replacement mounting spacer for ice makers. Maintains proper clearance and alignment between components. Replace if cracked, broken, or missing.

8-18 x 1/2 inch mounting screw for refrigerators, washers, dryers, and other appliances. Replace stripped, missing, or damaged screws during repairs.

Ice maker door won't stay closed or seal properly? This door catch assembly restores secure latching to maintain proper temperatures and operation.

Decorative plug covers exposed screw holes on refrigerator doors and cabinet. Replaces missing, cracked, or worn plugs for a clean finished look.

Bottom door gasket for ice makers. Seals lower door edge to maintain temperature and prevent frost buildup. Replace if worn, cracked, or leaking air.

Secures hoses to fittings and prevents leaks in your washer. Replace if worn, loose, or missing to stop drips and keep water connections tight. Confirm fit.

Ice not freezing properly or melting too fast? A worn door gasket lets warm air in. This 15-inch seal restores proper insulation in about 20 minutes.

Replace the door hinge sleeve on your ice maker or ice machine. Fits between hinge pin and bracket. Order a new sleeve if yours is cracked or worn.

Replacement top hinge for ice maker doors. Installs at the upper door corner. Order if your original hinge is broken, cracked, or no longer holds securely.

Hinge shim for ice makers. Installs between hinge components to maintain proper door alignment. Replace if worn, cracked, or missing for smooth operation.

White door handle for ice maker access doors. Replaces worn, cracked, or broken handles to restore smooth opening and secure grip on your unit.

Black handle for ice maker compartment door. Installs on front panel to provide grip for opening and closing. Replace if cracked, broken, or missing.

Replacement cover assembly for ice makers. Installs to replace cracked, broken, or missing covers. Protects internal components and restores appearance.

This is a replacement screw used to securely fasten appliance panels and small components. It restores secure attachment and stops noise or loose parts caused by missing or damaged fasteners. What it does

• Holds trim, panels, brackets or components in place to prevent movement and rattling
• Restores proper alignment when a mounting screw is missing or stripped
• Helps maintain safe, stable operation by keeping parts secured
• Works wherever the original OEM screw of this part number is specified

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not over-torque; overtightening can strip threads or damage parts
• Keep small parts away from children and pets during installation

White handle mounting screw for ice makers. Secures the door handle in place. Order a replacement if your original screw is stripped, lost, or damaged.

Black mounting screw for ice maker door handles. Secures handle to door panel. Replace if screw is stripped, missing, or no longer holds handle firmly.

Black plastic right side endcap filler for freestanding ice makers. Replaces cracked, broken, or missing endcap trim pieces. Installs on right side.

Color: Black. This is the left side endcap filler. For right side use 2185656B.

Wiring channel for ice makers. Organizes and protects electrical wires inside the unit. Replace if cracked, broken, or missing to secure wiring properly.

Water pooling under your ice maker? A cracked or damaged drain tube causes leaks and floor damage. This 15-inch tube restores proper drainage flow.

Missing or damaged ice scoop? This replacement scoop fits most ice makers and provides sanitary ice retrieval. Measures 4" x 10.5" for easy handling.

8-18 x 5/8 inch screw for securing control housing, transformer, and thermistor clamp in ice makers. Replace missing or stripped screws during repairs.

Bottom door hinge for freestanding ice makers. Mounts at the base of the door to provide pivot support. Replace if cracked, bent, or worn from use.

Secures your ice maker door to the hinge assembly for smooth pivoting. Replace if worn, damaged, or causing door misalignment, rubbing, or sagging.

8-32 x 1/2 inch mounting screw for refrigerators. Secures panels, brackets, and components. Replace lost, stripped, or corroded screws.

Secures flexible tubing to fittings on water and drain lines. Replace when clamps lose tension or you find leaks. Confirm fit with your model number.

Size: 8-18 x 3/4 inch.

Loose panels or rattling components? This mounting screw secures body panels and electronics in appliances. Quick 5-minute fix for most models.

Replacement scoop holder that mounts on the ice maker door to keep your ice scoop secure and accessible. Replaces broken or missing holders.

Size: 10-32 x 5/8 inch.

Adjustable leveling leg threads into dishwasher base to set height and stabilize cabinet. Replace worn, missing, or stripped legs to stop rocking.

Electrical shield for ice makers. Protects wiring and electrical components from moisture and debris. Replace if cracked, damaged, or missing.

Black front grill panel for ice makers. Covers the front exterior of your unit. Replace if cracked, discolored, or damaged to restore appearance.

White front grill panel for freestanding ice makers. Replace this cosmetic part if your original grill is cracked, discolored, or missing.

Mounting screw for refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repairs. 8 x 1-1/4 inch size.