Parts for QFW150SSN1WW: Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This ground screw secures an appliance's chassis grounding connection to ensure a reliable electrical ground and help reduce the risk of shock or electrical faults. Simple replacement when the original screw is missing, damaged, or corroded. What it does:

• Fastens the appliance ground wire or grounding strap to the metal chassis for a secure electrical ground.
• Restores a proper grounding point when the original screw is loose, stripped, corroded, or missing.
• Helps address symptoms related to poor grounding, such as intermittent power, electrical noise, or tripped breakers (as reported).
• Provides a direct, stable connection that supports safe appliance operation.

• One ground screw

• Disconnect power to the appliance before attempting any repairs to avoid electrical shock.
• Tighten to snug contact with the chassis; avoid overtightening which can strip threads or damage the metal.
• If ground wire or chassis threads are damaged, inspect for necessary additional parts or repair.

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

The Washer Door Lock is an OEM replacement part for GE washing machines. It is designed to keeps the door locked until the wash cycle is complete, preventing the door from accidentally opening while the washer is in use. 

Symptoms of a faulty washer door lock include:

• Door not locking or unlocking
• Door lock error messages
• Inability to start the washer due to door lock issues

A bad washer door lock can be caused by wear and tear over time or damage due to excessive force or mishandling. If you notice that the door is not locking properly or if the washer displays a door lock error, it may be time to replace the the old or damaged door lock with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a genuine control panel position screw used to secure the range or oven control panel so it stays aligned during normal use. Replaces missing or stripped mounting hardware to restore proper panel fit. What it does:

• Secures the control panel to the appliance frame so buttons and displays remain stable
• Helps prevent panel movement that can cause loose connections or misalignment
• Suitable when original screw is lost, rusted, or damaged
• Fits the OEM screw location and threading specified for the panel mount

• One control panel position screw (M4 x 8)

• Use correct screwdriver and magnetic tray to avoid dropping the screw behind the appliance
• Tighten until snug; do not overtighten to prevent stripping the threaded insert
• Disconnect power before working near electrical components or control boards
• Inspect and replace as needed if other mounting hardware is corroded or damaged

This manual door unlock strap is the replacement strap that lets you manually release a stuck appliance door latch, restoring access when the electronic unlock doesn't operate. It provides a simple, serviceable way to open a locked door without replacing the whole latch assembly. What it does:

• Provides a manual pull method to release a stuck or locked door latch.
• Commonly used when the control or lock mechanism fails to disengage electronically.
• Helps you regain access to the appliance without waiting for parts or service.
• Works as the OEM replacement strap specified for the latch assembly.

• One manual door unlock strap.

• Disconnect power to the appliance before starting any service to avoid shock or injury.
• Access may require removing an access panel or inner door trim; keep track of screws and fasteners.
• Inspect the latch assembly while replacing the strap and replace any damaged fasteners or clips.

This replacement wire tie secures wiring and harnesses inside appliances to keep connections neat and reduce movement that can cause wear. It's a simple fix to organize wires during repairs or after reassembly. What it does:

• Holds wiring and harnesses in place to prevent rubbing and chafing
• Keeps wires bundled to reduce strain on connectors
• Helps prevent wires from contacting hot or moving parts
• Useful when reassembling panels or replacing components

• Always disconnect power before servicing the appliance
• Loop the tie around the wires, insert the tail through the head, and tighten to secure—avoid over-tightening
• Trim the excess tail flush with a cutter to prevent snagging
• Replace any damaged wiring insulation before bundling

A top panel guide pin screw that secures and aligns the range/oven top panel for a snug, stable fit. Replaces worn or missing guide pins to restore proper panel positioning and reduce rattling or movement. What it does:

• Guides and secures the top panel to the appliance frame so the panel sits correctly
• Prevents the top panel from shifting, vibrating, or rubbing during use
• Replaces broken or missing guide pins that can cause uneven gaps or loose panels
• Works with the existing top panel hardware to maintain safe, stable operation

• One top panel guide pin screw

• Disconnect power to the appliance before beginning any service
• Use basic hand tools; thread carefully and avoid overtightening to prevent stripping
• Keep removed hardware organized for reassembly and verify panel alignment before tightening

This hinge screw secures a range/oven door hinge so the door opens and closes smoothly and stays aligned. Replace a stripped or damaged screw to restore proper door movement and reduce wobble or sag. What it does:

• Fastens the oven/range door hinge to the door or cabinet frame
• Keeps the door aligned for even closing and a good seal
• Helps prevent door wobble, sagging, or uneven opening
• Can stop squeaks or binding caused by a worn or damaged screw

• 1 hinge screw

• Turn off power at the breaker and ensure the appliance is cool before starting
• Support the door while removing and reinstalling hinge hardware to avoid dropping it
• Use the correct screwdriver and thread engagement to avoid stripping the screw
• Replace other hinge components if worn to ensure proper alignment

This drain cleanout access door provides a finished opening for accessing the appliance drain area so you can reach the drain trap and remove clogs or debris without removing major panels. It restores a neat exterior finish. What it does:

• Covers the drain cleanout opening and keeps debris out while allowing service access
• Provides a removable access point for clearing drain clogs and inspecting the drain area
• Helps prevent small items from falling into the drain cavity
• Useful when leaks or slow draining suggest blocked drain lines or accumulated debris

• Disconnect power to the appliance before servicing to reduce shock risk
• Access may require removing the appliance kickplate or lower front panel; use basic hand tools
• Align and secure the access door per the appliance's service instructions; do not force fit

A single self-tapping screw used to secure appliance panels and trim for a stable, vibration-free fit. Replaces a lost or damaged mounting screw to restore proper part attachment and reduce rattling. What it does:

• Fastens control panels, brackets, trim pieces or small assemblies to metal or plastic surfaces
• Creates its own threads for a tight hold in sheet metal or molded openings
• Helps eliminate loose parts that can cause noise, vibration, or misalignment
• Commonly used where original screws have stripped, corroded, or been lost

• One tapping screw (quantity: 1)

• Use the correct-size Phillips or Torx driver to avoid cam-out or head damage
• Start straight and apply steady pressure; do not overtighten to prevent stripping or cracking
• Disconnect power and remove any panels before working
• If threads are damaged, replace the mating fastener or insert before installing this screw

A replacement access door frame that restores the finished opening and secures the appliance access panel for safe, tidy service access. Replaces a cracked, warped or missing outer trim to improve fit and appearance. What it does:

• Provides a finished trim around the appliance access opening for a clean look
• Secures the access panel so service areas remain covered during use
• Prevents gaps that can catch lint, debris or interfere with door closure
• Addresses symptoms like visible cracks, warped trim, loose fit or missing frame

• Disconnect power to the appliance before starting any work
• Basic hand tools may be required; keep existing screws if not supplied
• Handle gently to avoid scratching or cracking the new trim

This power board assembly is the main control board that supplies and regulates electrical power to the appliance's control systems, restoring control functions and electronic operation when the original board has failed. What it does:

• Supplies and distributes power to control circuits and user interface components
• Regulates voltage to the appliance's control and safety systems
• Can cause a blank display, unresponsive controls, or loss of power when faulty
• May resolve intermittent resets, erratic behavior, or failure to start when related to control electronics

• Disconnect power at the breaker or unplug the appliance before servicing.
• Take pictures or label wiring before removal to ensure correct reconnection.
• Handle the board carefully; avoid static discharge and mechanical damage.

This external hose guide secures and routes the appliance drain hose at the cabinet opening to prevent kinks and chafing, helping maintain proper drainage and reduce wear on the hose. What it does

• Guides the drain hose through the cabinet or chassis opening to prevent rubbing and abrasion
• Helps keep the hose properly positioned to avoid kinks that can restrict drainage
• Reduces the chance of hose wear that can lead to leaks or premature failure
• Works with the existing hose and mounting area to maintain a tidy hose path

• Disconnect power and shut off water supply before servicing the appliance
• Remove any access panels needed to reach the hose opening; basic hand tools may be required
• Position the hose in the guide and secure per the appliance's service instructions; avoid sharp bends in the hose

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This tapping screw secures appliance panels and components where threads are formed in-place. It provides a fast, reliable hold for sheet metal and plastic mounting points during repairs or assembly. What it does:

• Cuts threads into sheet metal or molded plastic as it is driven, eliminating the need for pre-tapped holes
• Secures panels, brackets, or small components to the appliance chassis
• Commonly used where vibration resistance and a tight fit are needed
• Can resolve loose panels, rattling parts, or components that pull free from thin mounting surfaces

• One tapping screw

• Use the matching driver bit and steady pressure; do not overtighten to avoid stripping or breaking the screw
• Start straight and drive at low speed to ensure proper thread formation
• Wear eye protection and disconnect power to the appliance before working on electrical areas
• Replace with the same screw type and size to ensure proper fit and safety

This inverter board assembly converts DC to the high-voltage power that the microwave's magnetron needs, restoring proper cooking power and variable power control. It replaces a failed inverter to help the oven heat consistently. What it does:

• Supplies and regulates high-voltage power to the microwave magnetron for proper heating.
• Enables inverter-style variable power control instead of fixed on/off cycling.
• Commonly used when the microwave produces little or no heat or has inconsistent cooking.

• Disconnect power and discharge high-voltage components before accessing the inverter; high voltages are dangerous.
• Replacement typically requires removing the microwave outer cover and disconnecting wiring harnesses—keep photos or labels for correct reconnection.
• Handle the board by its edges and avoid static discharge; use proper ESD precautions if available.

This bottom cover plate is the lower access panel that protects the appliance's underside, keeps internal components clear of debris, and restores the unit's finished appearance. It helps prevent accidental contact with wiring and controls while allowing proper clearance. What it does:

• Covers and protects components located at the appliance's base
• Prevents debris, lint, and small objects from entering the cabinet
• Stops drafts and helps maintain proper airflow pathways
• Eliminates rattles or gaps caused by a missing or damaged lower panel
• Restores the appliance's exterior finish for a clean look

• Disconnect power (and gas, if applicable) before starting any service
• Support the appliance and tip or raise only as recommended by the manufacturer
• Remove mounting screws and retainers, align panel tabs, then secure with original fasteners
• Replace any missing or damaged clips or screws before finishing

This door strike mounts to the washer door and engages the door lock. A worn or broken strike can keep the door from latching, preventing the washer from detecting a closed door and starting or locking cycles.

• Provides the latch pin that engages the door lock assembly
• Allows the control to recognize a fully closed door
• Keeps the door secured during operation
• Common signs: door won't latch/lock, washer won't start, "door/lock" error, or visible damage/missing strike

• Disconnect power before servicing
• Open and support the door to avoid hinge strain
• Note the original strike's orientation; install the replacement in the same position and ensure it's fully seated
• Run a short test cycle to confirm proper locking

This lower guide pin secures and guides the lower dish rack so it slides smoothly and stays aligned. Replacing a worn or broken guide pin restores proper rack tracking and reduces rack misalignment and rough sliding. What it does:

• Guides the lower rack along its track to keep it aligned and stable
• Prevents the rack from coming off the rollers or binding during use
• Reduces scraping, grinding, or noisy movement caused by a damaged guide
• Helps ensure even loading and proper door clearance by keeping the rack positioned

• Disconnect power to the appliance before starting any repair
• Remove the lower rack and any obstructing components to access the guide pin
• Typically snaps or clips into place; may require a flat tool to remove the old pin
• After installation, run the rack to ensure smooth travel and proper alignment

A replacement top cover that restores the appliance's finished exterior and protects internal components from dust and debris. Fits as the outer top panel to renew appearance and help prevent damage. What it does

• Covers and protects internal components located beneath the top of the appliance
• Restores the appliance's finished exterior after dents, cracks, or cosmetic wear
• Helps keep dust, lint, and moisture away from controls and internal parts
• Reduces risk of further damage from impacts or spills near the top surface

• Disconnect power (and water if applicable) before beginning any repair
• Use appropriate hand tools; panel fasteners may be screws or clips depending on model
• Handle edges carefully to avoid cuts and to prevent damaging the finish
• Follow model-specific instructions for alignment and secure fastening

This RJ45 connector is the modular network jack used to connect Ethernet-style cords to the appliance's control/communication board, restoring a secure data link for diagnostics or network features. Fits the factory wiring interface. What it does:

• Provides a secure Ethernet-style connection between an external cable and the appliance control/communication board.
• Restores reliable network or communication connectivity when the original jack is cracked, loose, or fails.
• Helps resolve symptoms such as intermittent or no network/communication link and visibly damaged or bent connector pins.
• Serves as the replacement interface for diagnostics ports or board-mounted network connections.

• One RJ45 connector (modular jack) as pictured.

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Access the control or communication board per your appliance's service instructions; handle PC boards by the edges to avoid damage.
• Use proper tools to remove the old connector and secure the replacement; ensure mating cable seats fully and pins align.
• After installation, restore power and test the connection and any affected network/communication features.

This push-button door switch detects when the appliance door is open or closed and restores proper interior-light and door-sensing behavior. Replace a failed switch to stop light or door-detection problems and return normal operation. What it does:

• Senses door open/closed to turn the interior light on and off.
• Provides door-open feedback used by the appliance's control to enable or pause door-related cycles.
• Common symptoms of a bad switch: interior light won't turn on, light stays on after door closes, or door-related functions fail to start.
• OEM-style replacement designed to match the original switch form and electrical connections.

• Disconnect power to the appliance before starting any repair.
• Access location varies by model (door liner, hinge area, or inner panel); you may need basic hand tools.
• Keep original mounting hardware; verify connector orientation before removing the old switch.
• Test door operation and light after installation.

A small foam cushion designed to fit on the appliance crossbrace to reduce vibration and prevent metal-to-metal contact. Helps quiet operation and protects adjacent components from abrasion or rattling. What it does:

• Cushions the crossbrace to absorb vibration and reduce noise during operation
• Prevents metal edges from rubbing or chafing nearby parts
• Helps stabilize trim or panels that contact the crossbrace
• Used where a soft, durable spacer is needed to stop rattles or wear

• Disconnect power before accessing internal panels or structural braces
• Remove any covers or fasteners necessary to access the crossbrace area
• Clean mating surfaces of oil, dust, and old adhesive for best fit
• Press or seat the pad into place; use only OEM-recommended adhesive if the original used adhesive

A replacement back cover seal that restores a tight gasket between the appliance cabinet and rear access cover to help keep lint, dust and moisture out of the cabinet and maintain proper airflow paths. What it does

• Seals the gap at the cabinet's rear where the back cover mounts to reduce lint and dust ingress.
• Helps maintain intended airflow and routing behind the appliance.
• Reduces the chance of internal contamination that can cause odors or degraded performance.
• Visible signs it may be needed: torn, crushed or missing foam/rubber at the rear cover or lint/dirt buildup around the seam.

• One back cover seal

• Disconnect power (and gas if applicable) before beginning work; follow all safety procedures in the appliance manual.
• Remove the rear access cover fasteners, clean mating surfaces, then press or align the seal into place before reinstalling the cover.
• Inspect the seal seating and cover screws for damage; replace any damaged fasteners.

This M6 bolt secures components and assemblies in your appliance, restoring proper fit and preventing movement. Use it to replace a missing or damaged fastener to stop rattling and ensure parts stay aligned. What it does:

• Fastens panels, brackets, and mounting hardware where an M6 threaded bolt is specified
• Replaces stripped, corroded, or missing bolts that cause vibration or loose components
• Helps maintain alignment of motors, housings, and assemblies to reduce noise and wear

• Disconnect power to the appliance before attempting any repair
• Use the correct socket or wrench size for an M6 bolt and tighten snugly without overtightening
• Inspect mating threads and replace if damaged; do not force a cross-threaded fastener

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.