Parts for Maytag JUB24FRARS00: 02 - Cabinet Parts

This evaporator fan motor drives the freezer fan that circulates cold air across the evaporator coils and through the ducts. Replacing a weak or noisy motor restores proper airflow for consistent cooling and defrost performance.

• Circulates cold air from the evaporator through the freezer and fresh food compartments
• Helps maintain even temperatures and quicker recovery after door openings
• Common failure symptoms: warm refrigerator section, little/no airflow from vents, loud humming/squealing or intermittent fan operation, and frost/ice buildup on the freezer's rear panel
• Also known as the freezer fan motor or "Motor-Evap"

• Disconnect power; remove shelves/drawers and the rear interior freezer panel to access the fan
• Note wiring and mounting orientation; unplug connectors and remove the old motor
• Transfer the fan blade and any rubber isolators/mounting hardware from the original motor if needed
• Ensure blade orientation and wire routing clear the blades; test operation before reassembly

This Leveler is the adjustable foot that supports and levels your appliance. Replacing a worn, cracked, or missing leg helps stop rocking and vibration, improving stability and ensuring smooth, quiet operation.

• Screws into the base to set height and keep the appliance level and secure
• Helps reduce rocking, vibration, and rattling that can cause excess noise
• Supports proper alignment and smooth door/closure operation when level
• Common symptoms: appliance wobbles, leg is stripped or broken, difficult to keep unit level

• Disconnect power and shut off gas/water if applicable before servicing
• With help, tip or lift the appliance slightly and protect the floor
• Thread the new leveler into the mounting boss and adjust height with a level
• Verify the unit is stable by gently rocking and recheck level after initial use

This thermostat is the temperature control that helps maintain consistent cooling in your refrigerator. Replacing a worn or faulty thermostat restores stable interior temperatures and prevents food spoilage from fluctuating temps. What it does:

• Senses cabinet temperature and cycles the compressor or cooling system to maintain the set temperature
• Prevents the refrigerator from running constantly or failing to run when temperature rises
• Common symptom of failure: interior too warm or too cold despite correct settings
• Can cause excessive compressor cycling or inconsistent cooling when defective

• One thermostat

• Disconnect power before accessing the control area to avoid electrical shock
• Remove any trim or access panels to reach the thermostat; note or photograph wire connections before disconnecting
• Reconnect wires to the matching terminals and secure mounting; avoid pinching or bending sensing elements if present
• After installation, restore power and monitor temperatures for a full day to ensure normal cycling.

This black replacement control knob restores safe, easy control of your appliance's settings. It provides the original user interface feel so you can select cycles and temperatures with a firm grip. What it does

• Replaces a cracked, stripped, loose or missing control knob so controls turn smoothly
• Engages the control shaft to select cycles, temperatures, or power settings depending on the model
• Improves user safety and operation by restoring a secure, easy-to-grip surface
• Matches OEM fit and appearance for a factory-style replacement

• One black control knob

• Always disconnect power (unplug or shut off breaker) before servicing the appliance
• Pull the old knob straight off the control shaft; align and push the new knob onto the shaft until fully seated
• Do not force parts; inspect the control shaft and spline for damage before installing

Replacement on/off switch that restores basic power control to the appliance's electrical circuit. Swapping a failed switch can fix ovens, cooktops or other appliances that don't power on or have intermittent power, returning reliable control. What it does:

• Provides the user-accessible on/off function to complete or interrupt the appliance's electrical circuit
• Replaces worn or failed switch contacts that cause intermittent power or no-response conditions
• Can resolve symptoms such as an appliance that won't start, powers off unexpectedly, or fails to respond to the control knob or button
• Acts as the primary electrical contact for the controlled function

• Disconnect power at the breaker or unplug the appliance before starting
• Note or photograph wire locations and switch orientation before removing wires
• Use basic hand tools; handle terminals carefully to avoid bending or breaking
• After installing, restore power and test the function

This front grille is the lower kickplate that finishes the front of the appliance and helps protect internal components from dust and debris. It restores the appliance's factory appearance and keeps the lower front area tidy. What it does:

• Covers and protects the lower front opening and components from dust, pet hair, and spills
• Restores the original look of the appliance after damage or removal
• Helps direct airflow under the appliance where applicable
• Fits and secures to the front base using existing mounting points

• Turn off and unplug the appliance before attempting installation
• Typically installs from the front and secures with screws or clips; keep original fasteners for reuse if possible
• If grille is dented or warped, replace rather than try to reshape to ensure proper fit and airflow
• Use basic hand tools;