Parts for Frigidaire FFTW4120SW0: Cabinet / Top Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Suspension Rod is an OEM part for Frigidaire top load washers. This rod is designed to support the washer tub, helping to absorb vibrations and maintain stability during the washing and spinning cycles.  

Causes of a bad suspension rod can include wear and tear over time, heavy or unbalanced loads that strain the rod, or physical damage from impacts or mishandling.

Symptoms of a bad suspension rod include:

• Excessive shaking or vibrating during the wash cycle
• The washer moving or "walking" during operation
• Unusual banging or knocking noises
• The washer tub being off-center or not balanced

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Suspension is an OEM part for Frigidaire washing machines. It absorbs shocks and reduces vibration during the spin cycle. The suspension system minimizes noise and prevents the washer from walking or moving excessively during operation.  

Causes of worn suspension parts are typically due to normal wear and tear over time under heavy loads or unbalanced loads. 

Symptoms of a bad suspension include:

• Loud banging or knocking noises during spin cycles
• Excessive shaking or vibration
• The washer inching or walking across the floor
• Damage or cracks in the internal suspension components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Washer Pump Hose is an OEM part for Frigidaire washing machines. As a connection point, it transports water between the tub, pump and drain system.

Causes relate to regular stresses from water pressure changes. Chemicals, minerals and lint buildup may also reduce hose flexibility over time.

Symptoms of a faulty pump hose include:

• Slow or inefficient draining after cycles complete
• Water leaks near the base of the washer
• Loose connections at hose ends allowing leaks

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This drain hose assembly carries wastewater from the dishwasher to the household drain or garbage disposer. Replace a cracked, kinked, or clogged hose to stop leaks and restore proper draining performance.

• Routes drain water from the dishwasher pump/tub outlet to the sink drain or disposer
• Restores normal draining when the original hose is damaged, restricted, or leaking
• Common symptoms: standing water after a cycle, slow/no drain, leaks under the unit, or drain-related error codes
• Inspect for cracks, splits, clogs, or collapsed sections

• Disconnect power and shut off the water supply before servicing
• Pull the dishwasher forward to access the pump and house-drain connections; place a towel to catch residual water
• Match the original routing; avoid kinks/sharp bends and maintain a high loop or air gap per local code
• After installation, run a short cycle and check both ends for leaks

The Valve is an OEM part for Frigidaire washing machines. It is a component that controls the flow of water into the washer tub. The water valve regulates the water level during different cycles, helping to maintain optimal water levels and pressure. Over time, valves can deteriorate and start to leak due to mineral buildup or normal wear and tear from continuous use.

Causes of a bad valve can include mineral deposits clogging the small internal openings, worn out seals or gaskets, or damaged intermediate parts like hoses or connectors.

Symptoms of a bad water valve include:

• Leaks or water spills around the bottom of the washer
• Fluctuating or unstable water levels during the cycle
• The washer failing to fill or improperly filling with water
• Loud knocks or metallic noises coming from the valve area
• Reduced washing performance

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Sensor Assembly is an OEM part for Frigidaire washers. It is responsible for detecting the water level inside the washer tub and ensuring accurate water level control during the wash cycle. It detects the pressure changes caused by the water level, allowing the washer to adjust the water intake accordingly.

A bad sensor assembly can be caused by various factors, including wear and tear, electrical issues, or sensor malfunction. Signs of a faulty assembly include incorrect water level readings, water overfilling or underfilling, or the washer not filling with water at all.

Symptoms of a bad sensor assembly include:

• Overfilling or underfilling of the washer
• Water continuously filling or not filling at all 
• Error code related to water level issues

Replace your malfunctioning or damaged sensor assembly with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Lid Lock Assembly is an OEM part for Frigidaire top-loading washers. It secures the washer lid in place during operation to avoid injury risks. 

Causes of a failing lock assembly may involve normal wear of moving parts over extended use cycles. Internal components like springs can fatigue with age.

Symptoms of a bad lid lock include: 

• Inability to properly latch or seal the washer lid closed
• Loosening or spontaneous opening of the locked lid 
• Failures in lid sensing if the washer attempts to operate with the lock disengaged

Replacing with this genuine Frigidaire assembly restores safety functions. Compatible with Electrolux, Gibson, and Kenmore units as an authorized alternative.
 

This access panel cover protects internal components and finishes the appliance exterior while keeping wires and fasteners out of sight. It restores a clean look and helps prevent debris from reaching sensitive parts. What it does:

• Shields internal wiring, connectors, and components from dust and incidental contact
• Helps maintain appliance appearance by covering service openings and mounting points
• Keeps small parts and wiring secured behind the panel during normal use
• Can reduce the risk of accidental snagging or minor damage to internal components

• One access panel cover

• Disconnect power to the appliance before removing or installing the cover
• Use appropriate screwdrivers or fasteners and retain existing screws
• Handle edges carefully to avoid scratching the finish; align tabs or slots before seating
• Replace damaged clips or fasteners before completing installation

This dispenser assembly controls and releases liquid fabric softener into the wash at the proper time, helping your washer finish cycles with soft, evenly treated laundry. It replaces a worn or damaged dispenser to restore proper softener delivery. What it does:

• Holds and routes liquid fabric softener into the wash during the final rinse cycle
• Opens and closes to release measured amounts when the machine signals dispense
• Prevents leaks and overflows when functioning correctly
• Helps resolve symptoms like softener not dispensing, leaking from dispenser, or dispenser drawer not operating smoothly

• Disconnect power to the washer before starting any repair
• Turn off water supply and remove the dispenser drawer or access panel per your model's service instructions
• Replace the old assembly with the new unit and reassemble components in reverse order
• Test a rinse cycle to check for leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement power cord restores safe electrical connection to compatible refrigerators and freezers. It provides a direct, factory-style power lead so the appliance can receive household power without a damaged or frayed cord. What it does:

• Conducts mains power from the wall outlet to the appliance
• Replaces damaged, frayed, or burnt power leads that can cause intermittent power or no power
• Helps prevent unsafe wiring conditions when the original cord is compromised
• Works with appliances that use a three-prong grounded cord connection

• Unplug the appliance or switch off circuit power before beginning service
• Remove access panel or strain-relief fastener to detach the old cord; install the new cord using the same mounting and strain-relief method
• Ensure correct grounding and secure connections; do not alter the cord or wiring

A replacement refrigerator capacitor that helps the compressor and fan motors start and run reliably. Restores proper motor starting performance to reduce hard-start symptoms and intermittent cooling issues. What it does:

• Provides the temporary boost motors need to start and run smoothly
• Supports compressor startup and fan motor operation
• Commonly replaces worn or failing capacitors that cause buzzing or motors that won't start
• Helps address intermittent cooling and frequent cycling related to starting trouble

• Disconnect power to the appliance before servicing to avoid shock
• Discharge the capacitor before handling to prevent electrical injury
• Inspect mounting and wiring; replace only with the correct part number for your model

This electronic control board replaces the appliance's main control module to restore push-button and display functions for timed cycles and settings. It helps return reliable control when the unit won't respond or shows erratic behavior. What it does:

• Receives user inputs and runs the appliance's operating programs
• Manages power to motors, valves, and heating elements based on sensor signals
• Can stop erratic or unresponsive controls and incorrect cycle operation
• Resolve display errors, unresponsive buttons, or incorrect cycle starts

• Disconnect power before accessing or replacing the control board to avoid shock
• Handle the board by its edges and avoid contact with components or solder joints
• Verify connector orientation and secure all wiring harnesses before reapplying power

This plastic cover protects internal components and guides airflow inside the appliance, keeping parts shielded and helping maintain efficient operation. A simple replacement that restores a clean, finished interior. What it does:

• Shields motors, fans, or electrical components from debris and accidental contact
• Helps direct airflow for proper cooling or ventilation
• Prevents loose parts from rubbing or creating noise
• Reduces risk of damage to delicate components from impacts or objects

• Disconnect power to the appliance before beginning any work
• Remove any trim or panels as needed to access the cover; retain fasteners for reinstallation
• Handle clips and plastic tabs carefully to avoid breakage; some models use screws and some use snap-fit tabs

The Switch is an OEM component specifically designed for Frigidaire washing machines. It controls various cycle options like water temperature levels, spin speeds, and additional settings like stain removal cycles.

Causes of a bad switch can include water or chemical damage leading to component failure over time, or loose wiring connections causing intermittent issues.  

Symptoms of a bad switch include: 

• Inability to select wash cycles or adjust settings  
• Unresponsive or inaccurate temperature levels
• Lights/displays not functioning as normal
• Error codes indicating switch problems

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid expensive repairs down the road.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.