Parts for Briggs & Stratton 126332-0237-E8: Camshaft, Crankshaft, Cylinder, Piston Group Parts

This is a genuine OEM bushing/seal kit that is manufactured for use on a selection of Briggs and Stratton engines found on outdoor power equipment. The seal and bushing are responsible for providing a sealed connection within the engine. They are exposed to constant vibrations, pressure, and high temperatures, which can cause them to wear down over time. Seals can also become brittle and damaged with age, resulting in the need for replacement. It's best to purchase the kit and replace both parts at once with this OEM set from Briggs and Stratton. This OEM seal and bushing kit is manufactured for use in Briggs and Stratton engines found in snow throwers, lawn mowers, and leaf blower/vacuum models produced by the brand. It is also compatible with select models from Toro. The bushing and seal are sold as a kit, which includes one seal and one metal bushing. No other hardware or accessories are included. Any other needed hardware will require an additional purchase. It is important to wear gloves when performing repairs on outdoor equipment and make sure that the right tools are used for the job.

Seals between crankcase and crankshaft to prevent oil leaks and contamination. Replace if you notice oil pooling or engine performance issues.

This cylinder head gasket is a genuine Midwest Engine part, sold individually. This cylinder head gasket can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, and wood chippers. The purpose of the cylinder head gasket is to protect the cylinder head from the accumulation of debris by sealing it off; the cylinder head gasket also prevents internal materials from leaking out of the appliance.The cylinder head gasket might have to be replaced if the seal is broken and external materials can pass through into the cylinder head. This could be a result of puncturing, tearing, scraping, or eroding to the component, in which case the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This cylinder head gasket is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.

Seals the two halves of your engine crankcase to prevent oil leaks. Replace when you notice leaking or during crankcase maintenance. Confirm fit.

Fix oil leaks or complete oil changes with this engine oil drain plug. Essential for draining oil from lawn and garden equipment motors. Direct fit.

Oil seal for lawn and garden engines keeps lubricant contained within designated areas. Replace if leaking oil or during engine maintenance. Verify fit.

Engine won't start or has loss of power? A sheared flywheel key prevents proper ignition timing. This key aligns the flywheel to the crankshaft.

Fix low compression or excessive smoke with this engine piston assembly. Common solution for worn rings or scoring. Moderate difficulty repair for small engines.

Piston ring set for small engines. Installs around the piston to maintain compression. Replace if rings are worn, cracked, or broken for proper seal.

Fix engine knocking or power loss with this piston pin lock. Secures the piston pin in small engines. Basic mechanical skills needed for installation.

This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.

If your engine won't start or runs rough, the camshaft may be broken. This part opens and closes valves for proper combustion. Moderate skill needed.

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

An air cleaner gasket is a valuable barrier between the carburetor of a machine and the air filter. This air cleaner gasket is made out of durable composite material. It is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snowblowers, tillers, leaf blowers, and wood chippers. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.The air cleaner gasket part is crucial to the health and longevity of the machine's engine. The purpose of the air cleaner gasket is to help seal and protect the engine, the air cleaner, and other internal systems from dirt, contaminants, and debris that can often become the source of engine problems.The proper gasket for each user's engine depends entirely on the engine's design. That's why it is strongly recommended that users check their engine's Illustrated Parts List and refer back to their owner's manuals before making any decisions. This air cleaner gasket is an original OEM part sourced directly from the manufacturer, Midwest Engines. It is sold individually.

Complete engine gasket set seals critical engine components. Replace when rebuilding your engine or if you notice oil leaks. Verify fit with your model number.

Internal timing gear for lawn and garden engines. Replaces worn, stripped, or damaged gears affecting engine timing. Essential component for rebuild.

This replacement exhaust gasket is an authentic OEM part for a snowblower or lawn tractor engine. On these appliances, the exhaust is located quite near to the air filter, meaning that there is a chance that exhaust could leak into the carburetor. The carburetor requires fresh air to oxygenate fuel for combustion, so manufacturers install a gasket to help seal off the exhaust. Once installed, gaskets exist under a lot of pressure and will absorb the heat of the engine. These stresses cause gaskets to slowly degrade and eventually break their seal. If the exhaust gasket blows, the engine will not perform as it should. Be cautious of a noisy engine that burns more fuel than usual and gives off a burning smell. These are signs that the exhaust gasket has given out. If so, use a socket wrench and wrench set to disassemble the blower and air filter housings, then remove the exhaust manifold and change out the broken gasket. This high-quality replacement exhaust gasket is compatible with engines made by Toro, Husqvarna, Briggs & Stratton, and Snapper. It comes sourced from the original manufacturer and ships individually.

Seals the carburetor from the exhaust tube to protect your engine. Replace if you notice exhaust leaks or decreased performance. Confirm fit with your model.