Parts for Briggs & Stratton 445877-0130-E2: Camshaft, Crankshaft, Cylinder, Piston, Rings, Connecting Rod Parts

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

The flywheel key is the component on outdoor equipment that keeps the flywheel connected to the crankshaft. Over time, this key may become damaged or broken, particularly if the engine experiences a forceful stop, like hitting a large stationary object. If the flywheel key breaks, the engine will not start. A slightly damaged flywheel key is noticeable through symptoms like misfiring, backfiring, or having no power. If any of these are occurring, the flywheel key should be replaced to prevent complete engine failure.A flywheel puller tool is required for this repair. Make sure the engine is cool before working on the flywheel. Wear safety gear, including gloves and eye protection. Disconnect the spark plug and remove the blower housing. Remove the flywheel mounting nut and set it aside. Take the recoil starter cup off the mower. Use the flywheel puller to remove the flywheel and access the flywheel key. Remove the broken flywheel and replace it with the new flywheel. Reverse the steps to put the mower back together.This flywheel key is made of an aluminum alloy and is sold as an individual part. It is designed for use in lawnmowers, lawn tractors, and other small engines manufactured by Briggs and Stratton, Toro, Lawn-Boy, Simplicity, MTD, and others.

These genuine replacement piston rings seal the crankcase and create the optimal compression to power the lawn tractor engine. Piston rings are constantly exposed to high pressure and temperatures and can wear down or become damaged over time. A worn or broken seal means that the engine will lose compression and power and could become completely disabled if the damage is bad enough. Replacing the piston rings will give the engine the proper seal for optimal performance when OEM parts like this ring set are used. This genuine OEM ring set is manufactured to be used in hundreds of engines for lawn tractors manufactured by Briggs & Stratton and Toro. These rings have multiple locations and applications, depending on the type of engine and tractor in question. The piston rings are sold in a set of four durable rings made of high-quality metal. Always perform engine repairs only after the engine has cooled and when the spark plug has been disconnected for safety.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.