Parts for Briggs & Stratton 190412-3003-01: Carb,Mufflers,A / C,Gear Case Parts

This genuine Midwest Engine carburetor combines the air and the fuel at the correct ratio and filters that combination into the engine through a series of valves. This fuel combination is what the spark plugs ignite in the engine to run the outdoor appliance. Symptoms of a malfunctioning carburetor can include black smoke pouring out of the exhaust, significantly reduced fuel economy, difficulty starting the engine, a frequently stalling engine, or oil leakages from the location of the carburetor. If these symptoms point directly to the carburetor, the carburetor needs to be removed and replaced immediately before the appliance is used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM carburetor is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity. It can be used as a replacement part for the carburetors inside the small engines of snowblowers, wood-chippers, lawnmowers, tillers, generators, and other such outdoor appliances. This part is sold individually.

This genuine Midwest Engine carburetor body gasket can be used as a replacement part for lawn mowers, snowblowers, tillers, generators, and wood chippers. The purpose of a carburetor body gasket is to seal off the carburetor and prevent it from taking in air when it is not supposed to do so. Symptoms of a malfunctioning or broken carburetor body gasket can include strange vibrations from the engine while operating the appliance, a “hunting” idle and an engine that runs lean, or a backfiring engine. If any of these symptoms occur and can be directly attributed to a broken carburetor body gasket or a gasket that has come unsealed over time from neglect or general wear and tear, it should be replaced with this OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor body gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

This replacement part is a needle and seat kit. This part is a genuine replacement part made by Midwest Engine. This part is typically used as a part of the carburetor. This kit contains a brass plug with a shaped hole to accommodate the needle that also comes with it. These parts work together so that no fuel can enter the float bowl during use. This keeps the engine running smoothly. A new needle and seat kit might be needed if the current one is not working properly. If the user notices that the carburetor is having issues, it may be due to the needle and seat kit. Be sure the engine is completely turned off before starting this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This specific part is a genuine OEM replacement part for long-lasting use.

A needle and seat kit is used similarly to a float valve. It allows fuel into the carburetor chamber when it is empty and stops more fuel from entering the same chamber when it is already full. With regular use and age, the needle and seat kit or valve will wear out, become damaged, or stop working efficiently. Signs of this include an engine that continuously revs and will not idle or one that won't start at all. To improve performance and prevent further damages, a new needle and seal kit must be installed.Installing a needle and seat kit is simple with the proper tools. Wear gloves for protection. Remove the damaged or worn needle and seal kit, clean the area, and replace it with a genuine OEM replacement part. Test the device before putting it back to use.This needle and seat kit is an authentic OEM part. It is supplied by the original manufacturer and sold individually. It is comprised of high-quality, durable materials. The needle and seat kit is compatible with Toro and Briggs and Stratton brands. The kit can be used with a variety of machines, including lawnmowers, generators, lawn tractors, snowblowers, and other devices with small engines.

This is a carburetor overhaul kit for those who are working on their carburetor. The carburetor adjusts the balance of air and fuel for the engine. When it is not working correctly, rebuilding the carb is an option, and the elements found in this kit can help with that. The carburetor has a range of parts that help it to function properly. Gaskets could wear out, pins could break, or valves could need to be replaced. If there are issues with any of those parts, it could cause problems, such as air leaking into the engine. Carburetor problems can cause rough running, misfires, and problems getting the engine to start and stay going. This is a genuine OEM replacement part with a range of pieces for the carburetor overhaul. This includes valves and needles, gaskets, springs, and a cotter pin. This overhaul kit is for small engine carburetors and is compatible with brands like Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

This foam A/C filter is a genuine replacement for select engines. The foam A/C filter is designed to go around an inner support and provides protection to keep debris from getting into the engine when the unit is in operation. The filter can become clogged with dirt and debris over time or it may dry out and shrink up in a way that keeps it from functioning properly. In either case, a replacement will be necessary and this OEM replacement part can provide the solution that people need. This OEM air filter is manufactured by Briggs & Stratton and meets exact standards for an ideal fit on compatible machines. It can be used on engines that are found in lawn tractors and mowers. The piece is sold individually and may be required as a part of routine maintenance so it may be helpful to keep an extra one on hand. Other parts and hardware will require an additional purchase. Replacing air filters and other maintenance should be done once per season or whenever a problem arises. Be sure to wear gloves and work in a well-ventilated area when performing engine repairs.