Parts for Briggs & Stratton 190707-2139-01: Carburetor,Rewind,A / C,Screen Parts

This replacement part is a starter pulley. This is a genuine replacement part made by Midwest Engine. Starter pulleys are common in different types of machinery that operate using different parts. Pulleys are able to connect different parts together and allow them to move during use so that the engine runs smoothly. A new starter pulley might be needed if the current one is no longer working as normal. This can include being damaged or stripped down over time. Due to the friction that pulleys frequently experience, becoming worn down is common and this part should be replaced when this happens. Be sure to wear work gloves as needed during this repair as to not get injured. This starter pulley is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This rewind spring, also known as the recoil spring, is an essential part in a small engine. Its job is to rewind the pull rope back into the starter housing and, should there be difficulty in retraction, it is often because the rewind spring has failed. This OEM replacement part works in the engines and starter systems of tillers, pressure washers, lawn mowers, snowblowers, leaf blowers, generators, edgers, and wood chippers. It is suited to brands like Toro, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and others. The primary component is the spring, which is found inside of a metal housing. This part ships individually, and should the housing need to be replaced, it is a separate purchase.

When a starter rope is pulled, it will uncoil and provide tension to the spring and then engage the starter clutch, which turns the crankshaft to crank the engine. The starter clutch could have problems due to natural wear. It could also be damaged due to an incident with the machine. Corrosion could also be a factor since it is made from metal. When there are issues with the starter clutch, it will be difficult to get the engine started. The best course of action is for the operator to replace the clutch. This is a genuine OEM replacement starter clutch that is sold individually. The part can be used for many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, wood chippers, generators, and other small engines. Compatible brands include Craftsman, Toro, Cub Cadet, Lawn-Boy Simplicity, MTD, Murray, and Briggs & Stratton. Operators should ensure they are getting the correct starter clutch as a replacement.

This is an OEM replacement carburetor overhaul kit. It can be used with select models of lawn and garden equipment engines. The carburetor is one of the most important parts of the engine. It is responsible for creating and circulating the air/fuel mixture that is used to initiate combustion in the engine. Over time, the carburetor's gaskets and parts can become worn, damaged, or brittle due to age, constant heat and vibrations, and exposure to chemicals in fuel. It is easy and more affordable to rebuild and replace gaskets than to buy a new unit. This genuine OEM carburetor overhaul kit is manufactured by Briggs & Stratton to exact standards. It is compatible with select engines from the brand, as well as certain models from Toro. This overhaul kit includes all of the necessary diaphragms, gaskets, and parts to rebuild the carburetor and is sold as an individual kit. A screwdriver and pliers will be required for replacement of the carburetor parts. Be sure to replace gaskets one at a time to avoid confusion and keep the equipment in the correct functioning condition. Clean the areas where gaskets are seated to ensure a proper seal and always work in a well-ventilated area when performing engine repairs.

A needle and seat kit is used similarly to a float valve. It allows fuel into the carburetor chamber when it is empty and stops more fuel from entering the same chamber when it is already full. With regular use and age, the needle and seat kit or valve will wear out, become damaged, or stop working efficiently. Signs of this include an engine that continuously revs and will not idle or one that won't start at all. To improve performance and prevent further damages, a new needle and seal kit must be installed.Installing a needle and seat kit is simple with the proper tools. Wear gloves for protection. Remove the damaged or worn needle and seal kit, clean the area, and replace it with a genuine OEM replacement part. Test the device before putting it back to use.This needle and seat kit is an authentic OEM part. It is supplied by the original manufacturer and sold individually. It is comprised of high-quality, durable materials. The needle and seat kit is compatible with Toro and Briggs and Stratton brands. The kit can be used with a variety of machines, including lawnmowers, generators, lawn tractors, snowblowers, and other devices with small engines.

This replacement part is a needle and seat kit. This part is a genuine replacement part made by Midwest Engine. This part is typically used as a part of the carburetor. This kit contains a brass plug with a shaped hole to accommodate the needle that also comes with it. These parts work together so that no fuel can enter the float bowl during use. This keeps the engine running smoothly. A new needle and seat kit might be needed if the current one is not working properly. If the user notices that the carburetor is having issues, it may be due to the needle and seat kit. Be sure the engine is completely turned off before starting this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This specific part is a genuine OEM replacement part for long-lasting use.

This replacement part is a float bowl assembly. It is a genuine replacement part made by Midwest Engine. This part works with the carburetor and is part of the fuel chamber that allows the oxygen and fuel to mix together. This ensures that the engine is running smoothly and efficiently over time. A new float bowl assembly might be needed if the current one is damaged or missing. If the user is having issues with the carburetor in general, it might be due to the float bowl assembly. Be sure to wear working gloves while replacing this part as the float bowl can have fuel on it. Be sure to refer to the owner's manual before replacing this part. This float bowl assembly is sold individually. Note that it is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit.