Parts for Kenmore 796.31462411 (79631462411, 796 31462411): Case Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a customized screw used to secure appliance panels and components for a proper fit and safe operation. It replaces lost or damaged fasteners to restore stability and reduce rattling or movement. What it does:

• Secures panels, trim pieces, brackets, or internal components
• Restores proper alignment and prevents rattling or vibration
• Replaces missing or stripped fasteners that cause loose parts
• Helps maintain safe, reliable operation by keeping components fixed

• Disconnect power before servicing any appliance to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or plastic parts
• Keep removed fasteners organized to ensure correct reassembly

This switch assembly is the microwave's door interlock module. It mounts to the latch board and contains the switches that confirm the door is closed, restoring consistent start/stop operation when worn or sticking switches cause intermittent "door" errors.

• Houses and positions the interlock micro-switches on the latch board
• Signals the control that the door is securely closed so the unit can run
• Common fixes for: won't start, stops when the door is jostled, "door" error messages, or runs but doesn't heat
• Helps correct intermittent operation caused by fatigued or misaligned switches

• Disconnect power before servicing; microwaves retain dangerous high voltage
• Remove the upper grille and control panel to access the latch area per your model
• Note wire locations and switch orientation; move connectors one at a time to the new assembly
• After installation, verify door latching and test operation before reassembly

This detergent dispenser box assembly holds and delivers liquid or powdered detergent to the wash chamber, restoring proper dispensing when the original detergent drawer is cracked, clogged, or leaking. Designed as a direct replacement assembly for compatible LG front-load washers. What it does:

• Houses the detergent and fabric softener compartments and channels solutions into the washer at the correct time.
• Restores proper flow when the original dispenser is cracked, warped, or blocked.
• Helps prevent detergent leaks that can cause residue build-up on the door or front panel.
• Compatible with automatic dispensing cycles so detergents are released during the correct wash phase.

• One complete detergent dispenser box assembly as shown.

• High-level replacement: usually accessible from the washer front; remove the front access panel or drawer trim as required.
• Disconnect power and water supply before beginning service to avoid shock or unintended operation.
• Inspect surrounding seals and cabinet for damage; replace any cracked clips or hoses as needed.

This detergent box is the molded dispenser drawer that holds and releases liquid or powdered detergent into the wash tub during cycles, helping ensure detergent is delivered where needed for cleaning. What it does:

• Holds liquid or powdered detergent and channels it into the washer during the fill and wash cycles
• Helps prevent detergent from spilling into the cabinet or away from the wash water
• Common symptom of failure: detergent leaks, fails to dispense, or sits in the drawer instead of flowing into the tub

• One detergent box (dispenser drawer) as shown

• Remove power and water connections before accessing the dispenser area
• Inspect surrounding seals and mounting tabs; replace if damaged to ensure a proper fit
• Clean the dispenser area and rinse with water before installing the new box to remove residue

This softener cap seals the water softener housing to keep salt and resin contained and help maintain proper softening performance. Replace a cracked or missing cap to stop leaks and restore the unit's ability to hold softener media. What it does

• Seals the softener or water-treatment housing to prevent leaks and salt loss
• Keeps softener resin or salt contained for proper operation
• Helps prevent water intrusion that can reduce softener efficiency
• Can resolve symptoms like visible leaks, loose or missing cap, or salt bleeding from the canister

• One softener cap

• Turn off water supply and unplug power to the appliance before servicing
• Drain or remove any loose salt/resin from the housing before removing/installing the cap
• Hand-thread or gently press the cap into place; do not overtighten to avoid damage
• If the housing or sealing surfaces are damaged, replace those parts before installing this cap

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Hinge is an OEM replacement part for LG top-loading washing machines. This hinge allows the washing machine lid to open and close smoothly. One hinge is included in this pack. The hinges are held on by six screws.

Causes of failure can include general wear and fatigue from years of opening and shutting the lid. The connecting bracket may also become misshapen due to excessive weight loads.

Symptoms denoting worn hinges include:

• Difficulty lifting or controlling the lid's movement
• Grinding noises and sounds of strain coming from hinged areas
• Lids left ajar or not sitting completely flush after opening

This OEM LG part is also compatible with some Sears/Kenmore model washing machines.

A friction damper assembly that cushions and controls the movement of a door or panel to reduce slamming and improve closing action. Replaces a worn damper to restore smoother, controlled motion. What it does:

• Cushions and slows door/panel movement to prevent abrupt closing or opening
• Helps the door stay in position instead of snapping shut or falling open
• Reduces noise and wear from sudden impacts or vibration
• Eliminates symptoms like noisy operation, uncontrolled closing, or a loose-feeling hinge

• Disconnect power and remove any panels or trim to access the damper
• Retain fasteners and note orientation; install the new damper in the same position
• Reinstall panels and test the door/panel movement several times to ensure smooth operation

The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.

Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.

Symptoms of a bad water inlet valve include:

• Inability to properly fill the washer tub during cycles
• Water leaking or flooding from the valve area
• Erratic water temperature or varying fill levels between loads
• Cycles failing to advance due to inadequate or unregulated water flow

This OEM LG part is also compatible with Sears/Kenmore models.

This inlet hose channels household water into the appliance during the fill cycle. Replacing a cracked, brittle, or leaking hose restores a secure, leak-resistant path that helps prevent puddles and fill-related interruptions. What it does:

• Routes incoming water from the inlet valve into the appliance's internal water path
• Helps maintain a watertight connection when properly secured with clamps
• Typical failure signs: dripping or puddling under the unit, visible cracks/kinks/bulges, or lingering dampness
• A restricted or leaking hose can contribute to long fill times or incomplete cycles

• 1 inlet hose

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note the original routing and clamp locations; install the new hose the same way without twists or kinks
• Fully seat hose ends and secure clamps; restore water and run a brief fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

This clamp assembly secures a hose or tubing connection to maintain a watertight seal and reduce vibration. Replacing a worn or damaged clamp helps stop leaks and prevents hoses from slipping loose during operation. What it does:

• Holds a hose or tube firmly in place to maintain proper sealing at the connection point.
• Prevents leaks caused by loose, cracked or corroded clamps.
• Reduces vibration and rattling from unsecured hoses.
• Common symptom: visible leaking, water pooling, or a loose hose connection.

• Disconnect power and shut off water supply before starting any repair.
• Use the correct pliers or screwdriver for the clamp type; avoid damaging the hose.
• Inspect the mating hose and seal; replace any cracked or hardened hoses before reinstalling.
• Do not overtighten—tighten just enough to secure the hose without cutting or deforming it.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.