Parts for Ge ZIF181NPPBII: Case Parts

This 5/16-18 threaded nut secures fasteners on appliance assemblies, restoring stable connections and helping prevent loose or wobbly parts. Simple, durable replacement that fits standard 5/16-18 bolts used in many appliance brackets and components. What it does:

• Secures a 5/16-18 bolt to hold panels, brackets, or components in place
• Restores firm mechanical connections if the original nut is missing, stripped, or corroded
• Helps stop rattling, misalignment, or movement caused by a loose fastener
• Compatible with standard 5/16-18 threaded hardware used in appliance repairs

• Turn off and unplug the appliance before accessing internal components
• Use the correct wrench or socket to seat the nut; avoid using damaged tools
• Tighten until snug to secure the connection; do not overtighten to avoid thread damage
• If threads are damaged or stripped, replace the matching bolt and inspect mating parts

This right-side hinge-to-door support secures the refrigerator door to the hinge assembly, restoring proper door alignment and smooth opening/closing. Replaces a worn or damaged hinge support to reduce sagging and improve seal contact. What it does:

• Attaches the right side of the door to the hinge assembly to maintain correct alignment
• Prevents door sag and helps ensure an even gasket seal for efficient cooling
• Reduces rubbing, binding, or noisy door movement caused by a damaged hinge support
• Restores stable door operation after impact or long-term wear

• One right hinge-to-door support bracket

• Always unplug the appliance or disconnect power before starting repairs
• Support the door while removing or installing the hinge to prevent dropping or damage
• Use basic hand tools; do not force parts—check fastener fit and alignment during reassembly

This left-side hinge-to-door support secures the refrigerator door to the cabinet and helps the door pivot and close smoothly. It replaces a worn or damaged hinge bracket to restore proper door alignment and function. What it does:

• Anchors the door hinge to the door, providing a stable pivot point
• Keeps the door aligned to prevent gaps, rubbing, and uneven closing
• Helps stop door sag and maintains an airtight seal for proper cooling
• Common symptom: door is loose, misaligned, sags, or won't latch properly

• One left hinge-to-door support bracket

• Disconnect power to the appliance before beginning repairs and remove food from the door if needed
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads
• If the door has glass or molded panels, handle carefully to avoid breakage

This genuine replacement screw secures appliance components and restores proper fit and function. Use it when original fasteners are missing, stripped, or corroded to stop loose panels and rattling and keep parts aligned. What it does

• Fastens panels, brackets, or small components to the appliance frame
• Replaces missing or damaged screws that cause loose trim or rattling noises
• Restores secure fit where threads are stripped or corroded
• Helps prevent further damage from loose parts by maintaining correct alignment

• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread and tighten by hand first, then snug — avoid over-tightening which can strip threads or crack plastic
• Disconnect power to the appliance before working on internal components
• Consider replacing the mating nut or insert for a secure repair

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

A #8-18 x 7/8 screw used to fasten appliance panels and components for secure operation. Small, corrosion-resistant fastener that restores proper fit and reduces rattling or loose parts. What it does:

• Secures trim, panels, brackets, or internal components to restore proper alignment
• Helps stop vibration and rattling caused by loose or missing fasteners
• Matches original thread size and length for correct fit in designated mounting points
• Used wherever a #8-18 x 7/8 machine/sheet metal screw is required

• Use the correct #2 Phillips or driver specified for the screw head to avoid stripping
• Do not overtighten; stop when snug to avoid damaging threads or components
• Disconnect power and remove panels before working near electrical parts
• Replace only with the same size and thread type for proper fit and safety

Specs: 6-19 pl flp 3/4 s

Specs: 8-18 AB IHW 5/8 S

This front access cover clip secures the refrigerator's lower/front access panel so the panel stays aligned and the area remains protected. It replaces a broken or missing clip to restore a snug fit and reduce rattling. What it does:

• Secures the lower/front access cover to the appliance frame
• Keeps the panel aligned to prevent gaps and rubbing
• Stops rattling or vibration caused by a loose access cover
• Helps maintain a finished appearance and protects internal components

• Disconnect power before beginning any work to avoid shock
• Typically installs with a snap-fit into the panel/frame; may require gentle pressure
• Remove the access panel screws or clips first to reach the clip location
• Inspect surrounding tabs and mating surfaces for damage; replace damaged parts as required

This hinge limit pin is the replacement door stop that limits hinge travel and helps the door open and close on appliances. It restores proper hinge movement and prevents over-rotation and binding. What it does:

• Stops the hinge at the correct position to prevent the door from over-rotating
• Helps maintain proper door alignment for consistent sealing and operation
• Reduces hinge binding, sagging, and uneven door movement
• Fits into the hinge assembly to act as a physical travel limiter

• One hinge limit pin

• Unplug the appliance or disconnect power before starting work
• Support the door or have a helper when removing hinge components to avoid damage or injury
• Use basic hand tools; inspect surrounding hinge parts and replace if worn

This upper access cover is the external top panel that covers and protects the appliance's upper service area, giving clean finished appearance and keeping internal components shielded from dust and debris. What it does:

• Covers the appliance's upper access/service area to protect wiring, controls, and components
• Helps maintain a finished exterior look after service or part replacement
• Reduces dust and debris entry into the top service cavity
• Can prevent accidental contact with components behind the panel

• 1 upper access cover

• Remove power to the appliance before attempting any service or panel removal
• Use basic hand tools to remove fasteners; keep all screws for reinstallation
• Handle the panel carefully to avoid scratching or damaging the finish

This RJ45 harness is a plug-and-play connector cable that restores a secure board-to-board or board-to-module network connection, helping repair communication faults and intermittent operation caused by damaged or loose RJ45 connectors. What it does:

• Provides a secure RJ45 connection between control boards or modules for data and signaling.
• Replaces broken, bent, or corroded RJ45 connectors that cause intermittent or lost communication.
• Helps resolve symptoms such as error codes, unresponsive control panels, or components that stop responding intermittently.
• Maintains proper routing and strain relief to prevent connector damage from vibration or movement.

• Disconnect power to the appliance before accessing control boards or connectors.
• Handle connectors carefully; align plugs fully before seating to avoid bent pins.
• Route and secure the harness to avoid contact with sharp edges, hot surfaces, or moving parts.

The Cabinet LED is an OEM part for GE refrigerators. This energy-efficient light efficiently illuminates interior shelving areas through integrated circuitry.

Causes of failure relate to heat exhaustion from sustained daily use over many years. Environmental contaminants may accelerate degradation as well.

Symptoms include:

• Dimming or flickering illumination
• Premature lamp burnout 
• Inoperable lighting requiring replacement of entire housing unit

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This straight 1/4-inch water line coupler joins two sections of 1/4-inch OD refrigerator tubing, restoring a secure connection in dispenser and icemaker supply lines. Use it to splice, repair, or extend existing tubing.

• Creates an inline union for 1/4-inch OD refrigerator water tubing
• Helps address leaks, cracks, or breaks by replacing a damaged connector or splicing a cut line
• Useful when rerouting lines or adding inline components such as filters
• Common symptoms: water dripping at a tubing joint, loose/disconnected line, reduced or no water to dispenser/ice maker

• Unplug the refrigerator and turn off the water supply; dispense water to relieve pressure
• Cut tubing ends square and clean; ensure both tubes are 1/4-inch OD
• Make secure connections per the coupler design (push-to-connect or compression); ensure tubing is fully seated/assembled and gently pull to verify
• Restore water and check thoroughly for leaks

This master light switch kit replaces the main oven light switch assembly so the oven light turns on and off reliably. Designed for direct-fit replacement to restore normal oven lighting control. What it does:

• Replaces the oven's master light switch assembly that controls interior lighting
• Restores the ability to turn the oven/cabinet light on and off
• Helps eliminate flickering, intermittent operation, or complete light failure
• Works with existing wiring and mounting points for a straightforward swap

• One master light switch kit (assembly) as shown

• Disconnect power to the appliance before starting any work
• Basic hand tools required; follow OEM wiring and grounding instructions
• Verify proper operation after installation before returning appliance to service

This mobility wheel is the small cabinet roller that helps your refrigerator glide for cleaning or service. Replacing a worn, cracked, or missing wheel restores smooth movement and supports proper leveling and positioning. What it does:

• Supports the base of the cabinet and allows the unit to roll when repositioning
• Replaces wheels that are cracked, flat-spotted, broken, or missing
• Common symptoms: refrigerator is hard to move, drags or scrapes, sits unevenly, or shows visible wheel damage
• Aids in pulling the appliance out for maintenance or cleaning

• 1 mobility wheel

• Disconnect power and shut off the water supply before moving the appliance
• Use two people and protect flooring; raise/adjust leveling legs to relieve weight from the wheel
• Access the base/roller bracket, remove the damaged wheel, and install the new wheel securely
• Lower and re-level the unit, reconnect utilities, and verify smooth movement

The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.

You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Unpleasant taste or odor in water and ice
• Cloudy or discolored water
• The filter indicator light on the refrigerator signaling a replacement

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This 1/4" 90° union is a service fitting that redirects the refrigerator water line at a right angle to connect tubing runs, helping restore proper water flow to the dispenser and ice maker. Ideal for tight routing behind refrigerators. What it does

• Joins two 1/4" water tubing runs at a 90° angle to change direction without kinking.
• Replaces damaged, cracked, or leaking elbow fittings in the water line.
• Helps resolve symptoms such as water leaks at the connection point or reduced/blocked water flow to the dispenser or ice maker.
• Designed for inline use with standard 1/4" refrigerator water tubing.

• One 1/4" 90° union fitting.

• Turn off the refrigerator water supply before starting; relieve line pressure by operating the dispenser briefly.
• Inspect tubing ends for nicks or damage and trim squarely before installing the union.
• Hand-tighten fittings and finish with appropriate tool—do not over-tighten; follow OEM torque recommendations if available.

This cantilever shelf track secures and supports a refrigerator cantilever shelf, restoring stable shelf alignment and adjustability. It provides a durable mounting surface so shelves stay level and slide into preset positions. What it does

• Replaces a worn, cracked, or broken shelf track that lets the cantilever shelf lock into place
• Restores proper shelf alignment and prevents sagging or slipping under load
• Helps shelving slide smoothly between vertical notches for easy height adjustment
• Stops shelves from tipping forward when removing items

• Remove food and shelves from the area before installing; keep small parts and screws in a safe place
• Use basic hand tools; align track with existing mounting points and secure with the original screws or fasteners
• If plastic clips or mounting hardware are damaged, replace them to ensure a secure fit

The Water Valve and Tube Assembly is an OEM replacement part for GE side-by-side refrigerators. It serves as the inlet valve installed inside the fresh food compartment. 

Causes of a faulty assembly can include mineral buildup inhibiting proper valve opening or cracking/splitting of aging plastic tubes. Electrical issues affecting the valve solenoid may also develop over time.

Symptoms of a problematic assembly include:

• Ice maker or water dispenser unable to consistently produce ice/water  
• Leaks present around the rear inlet area
• Valve components failed to activate 

Compatible models also include Profile and Monogram side-by-side refrigerators.

The Bypass Filter Plug is an OEM part for GE refrigerators. It is used when a water filter is not installed. The bypass plug is essential for maintaining the refrigerator's water flow system, allowing water to bypass the filtration process. This is particularly useful during times when a replacement water filter is not immediately available or in situations where the household water supply is already adequately purified and additional filtration is not necessary.

Common causes of issues with the bypass filter plug include physical damage from handling, wear and tear over time, or improper installation. A faulty bypass filter plug can disrupt the water flow and affect the performance of the water dispenser and ice maker.

Symptoms of a bad Bypass Filter Plug include:

• Leakage or dripping from the water dispenser area.
• Difficulty in installing or removing the plug from the filter housing.
• Decreased water flow rate through the dispenser, indicating a potential blockage or improper fit.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A small plastic standoff that secures and insulates the refrigerator main control board from the chassis to prevent shorts and keep the board stable. Simple, serviceable replacement for damaged or missing mounting posts. What it does:

• Positions and supports the main control board to prevent movement and vibration
• Provides electrical insulation between the board and metal chassis to reduce short risk
• Restores proper board alignment so connectors and mounting points seat correctly
• Commonly replaced when the board is loose, cracked, or the original standoff is missing

• One main board standoff

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove protective panels to access the control board; handle the board by edges
• Press or snap the standoff into the chassis mounting hole, then seat the board onto the post
• Do not force or overtighten fasteners; replace any damaged clips or screws as needed

Front mounting grommet.