Parts for Ge ZIF241NPNAII: Case Parts

This 5/16-18 threaded nut secures fasteners on appliance assemblies, restoring stable connections and helping prevent loose or wobbly parts. Simple, durable replacement that fits standard 5/16-18 bolts used in many appliance brackets and components. What it does:

• Secures a 5/16-18 bolt to hold panels, brackets, or components in place
• Restores firm mechanical connections if the original nut is missing, stripped, or corroded
• Helps stop rattling, misalignment, or movement caused by a loose fastener
• Compatible with standard 5/16-18 threaded hardware used in appliance repairs

• Turn off and unplug the appliance before accessing internal components
• Use the correct wrench or socket to seat the nut; avoid using damaged tools
• Tighten until snug to secure the connection; do not overtighten to avoid thread damage
• If threads are damaged or stripped, replace the matching bolt and inspect mating parts

This right-side hinge-to-door support secures the refrigerator door to the hinge assembly, restoring proper door alignment and smooth opening/closing. Replaces a worn or damaged hinge support to reduce sagging and improve seal contact. What it does:

• Attaches the right side of the door to the hinge assembly to maintain correct alignment
• Prevents door sag and helps ensure an even gasket seal for efficient cooling
• Reduces rubbing, binding, or noisy door movement caused by a damaged hinge support
• Restores stable door operation after impact or long-term wear

• One right hinge-to-door support bracket

• Always unplug the appliance or disconnect power before starting repairs
• Support the door while removing or installing the hinge to prevent dropping or damage
• Use basic hand tools; do not force parts—check fastener fit and alignment during reassembly

This left-side hinge-to-door support secures the refrigerator door to the cabinet and helps the door pivot and close smoothly. It replaces a worn or damaged hinge bracket to restore proper door alignment and function. What it does:

• Anchors the door hinge to the door, providing a stable pivot point
• Keeps the door aligned to prevent gaps, rubbing, and uneven closing
• Helps stop door sag and maintains an airtight seal for proper cooling
• Common symptom: door is loose, misaligned, sags, or won't latch properly

• One left hinge-to-door support bracket

• Disconnect power to the appliance before beginning repairs and remove food from the door if needed
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use appropriate hand tools; avoid over-tightening fasteners which can strip threads
• If the door has glass or molded panels, handle carefully to avoid breakage

T30 M6 mounting bolt for freezers and refrigerators. Secures internal components and panels. Replace if missing, stripped, or damaged during repairs.

Secures panels, brackets, and components inside your refrigerator or freezer. Replace when original fasteners are missing, stripped, or corroded.

SCR solid-state switching module that controls power flow in refrigerator circuits. Replace when module is damaged, burned out, or failing to switch properly.

Fastens panels, trim, and brackets inside refrigerators and freezers. Replace when screws are stripped, missing, or corroded to restore secure fit.

Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.

This front access cover clip secures the refrigerator's lower/front access panel so the panel stays aligned and the area remains protected. It replaces a broken or missing clip to restore a snug fit and reduce rattling. What it does:

• Secures the lower/front access cover to the appliance frame
• Keeps the panel aligned to prevent gaps and rubbing
• Stops rattling or vibration caused by a loose access cover
• Helps maintain a finished appearance and protects internal components

• Disconnect power before beginning any work to avoid shock
• Typically installs with a snap-fit into the panel/frame; may require gentle pressure
• Remove the access panel screws or clips first to reach the clip location
• Inspect surrounding tabs and mating surfaces for damage; replace damaged parts as required

This hinge limit pin is the replacement door stop that limits hinge travel and helps the door open and close on appliances. It restores proper hinge movement and prevents over-rotation and binding. What it does:

• Stops the hinge at the correct position to prevent the door from over-rotating
• Helps maintain proper door alignment for consistent sealing and operation
• Reduces hinge binding, sagging, and uneven door movement
• Fits into the hinge assembly to act as a physical travel limiter

• One hinge limit pin

• Unplug the appliance or disconnect power before starting work
• Support the door or have a helper when removing hinge components to avoid damage or injury
• Use basic hand tools; inspect surrounding hinge parts and replace if worn

Adjustable leveling leg for freestanding and upright freezers. Replace this support foot if cracked, broken, or missing to stabilize your appliance.

Fixes intermittent operation and communication faults caused by damaged RJ45 connectors. Plug-and-play board-to-board connector cable. 15-minute repair.

Replace your refrigerator's cabinet LED light when it flashes, dims, or fails. This energy-efficient light illuminates interior shelving. Confirm fit with your model.

Fix wilting produce in crisper drawers with this humidity control board. Restores proper moisture regulation to keep fruits and vegetables fresh longer.

Refrigerator not cooling or freezing over? This defrost thermostat sensor regulates defrost cycles to prevent frost buildup and maintain proper temperature.

Straight 1/4-inch coupler joins two sections of refrigerator water tubing. Replace when cracked, leaking, or missing to restore connections.

Interior light not turning on or staying on? This master light switch kit restores reliable lighting control in your freezer. Direct-fit assembly.

Small cabinet roller that allows your freezer to glide smoothly for cleaning or service. Replace worn, cracked, or missing wheels to restore movement.

Reduces chlorine, lead, cysts, and pharmaceuticals for clean water and ice. Replace every 6 months or when filter light activates. Verify fit by model.

Fix water dispenser or ice maker issues with this 90-degree union fitting. Connects 1/4" water tubing at right angles in tight spaces behind refrigerators.

This cantilever shelf track secures and supports a refrigerator cantilever shelf, restoring stable shelf alignment and adjustability. It provides a durable mounting surface so shelves stay level and slide into preset positions. What it does

• Replaces a worn, cracked, or broken shelf track that lets the cantilever shelf lock into place
• Restores proper shelf alignment and prevents sagging or slipping under load
• Helps shelving slide smoothly between vertical notches for easy height adjustment
• Stops shelves from tipping forward when removing items

• Remove food and shelves from the area before installing; keep small parts and screws in a safe place
• Use basic hand tools; align track with existing mounting points and secure with the original screws or fasteners
• If plastic clips or mounting hardware are damaged, replace them to ensure a secure fit

Replaces the water filter when filtration isn't needed, maintaining water flow to your ice maker and dispenser. Confirm fit with your model number.

A small plastic standoff that secures and insulates the refrigerator main control board from the chassis to prevent shorts and keep the board stable. Simple, serviceable replacement for damaged or missing mounting posts. What it does:

• Positions and supports the main control board to prevent movement and vibration
• Provides electrical insulation between the board and metal chassis to reduce short risk
• Restores proper board alignment so connectors and mounting points seat correctly
• Commonly replaced when the board is loose, cracked, or the original standoff is missing

• One main board standoff

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove protective panels to access the control board; handle the board by edges
• Press or snap the standoff into the chassis mounting hole, then seat the board onto the post
• Do not force or overtighten fasteners; replace any damaged clips or screws as needed

Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.