Parts for Lg LFC25765ST/00: Case Parts

Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replacement mounting screw for refrigerator assembly. Secures panels, brackets, or components. Needed when original screw is stripped, lost, or damaged.

Replace your refrigerator's rear handle if it's cracked, broken, or missing. This structural support handle mounts to the back panel of your unit.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Fix dim or exposed interior lighting with a new light lens cover. Protects the bulb from moisture and impact. Easy 5-minute DIY repair with video guide.

Replaces a worn, cracked, or broken refrigerator door hinge assembly. Installs on the door frame to restore proper alignment and smooth operation.

Not cooling properly? A faulty evaporator assembly prevents cold air circulation. This repair requires moderate skill and 1-2 hours to complete.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fixes inconsistent cooling between compartments. This damper assembly controls airflow to restore proper temperature balance in your refrigerator.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Fan guide for refrigerators. Mounts to the evaporator or condenser fan assembly. Replace if cracked, broken, or missing to ensure proper airflow.

Drip pan for refrigerators. Installs beneath the appliance to collect condensation. Replace if cracked, warped, or missing to prevent water damage.

Drain tray assembly that collects condensation under your refrigerator. Replace if the original tray is cracked, broken, or missing to prevent leaks.

Refrigerator not cooling properly? This condenser wire assembly connects electrical components to ensure proper cooling. Moderate DIY repair for most models.

Replace your broken or cracked refrigerator fan grill assembly. Protective cover that installs over the evaporator fan in the freezer compartment.

Fix a noisy or non-working refrigerator fan that's causing ice buildup or warm temperatures. This motor replacement restores proper airflow in 30-60 minutes.

Refrigerator vent grill assembly that houses the fan, motor, damper, and temperature sensor. Replace if cracked, broken, or damaged for proper airflow.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

If your refrigerator light stays on when the door closes, the door switch likely failed. This easy 5-minute DIY fix restores light control.

If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.

Motor running loud or vibrating excessively? This motor mounting bracket secures the motor to the cabinet, reducing vibration and noise for stable operation.

Freezer too cold while fridge is warm? This damper motor support controls airflow between compartments. Common fix for temperature imbalance issues.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Interior light won't turn on when door opens? This refrigerator door switch signals when the door opens or closes. DIY-friendly repair, takes about 5 minutes.

The Light Bulb is an OEM part for LG refrigerators. It can be used in either the fresh food section or freezer compartment, providing illumination for easy visibility of the stored items.

Causes of a faulty light bulb can include regular wear and tear, reaching the end of its lifespan, or accidental breakage. These factors can result in issues such as a dark or poorly lit interior, making it difficult to see the contents of the refrigerator.

Symptoms of a bad light bulb may include:

• No illumination or dim lighting inside the refrigerator
• A flickering or intermittent light
• Visible damage or broken filament inside the bulb

This LG OEM bulb is also compatible with Sears/Kenmore models. 

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Fix error code ER DH, frost buildup, or warm refrigerator temps with this defrost heater. Restores airflow and prevents ice-clogged coils. Moderate DIY.

Fix refrigerator not cooling or warm temperatures with this compressor sealing pipe. Seals refrigerant lines to maintain proper pressure and cooling.

Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.

Refrigerator not cooling or completely dead after a power surge? This main control board restores responsive controls and proper operation. DIY repair.

This lamp cover protects and diffuses the refrigerator interior lamp, restoring even illumination and protecting the lamp from spills and contact. It replaces a cracked, yellowed or missing cover for improved light quality and safety. What it does:

• Diffuses the interior lamp for softer, more even lighting
• Protects the bulb from spills, splashes and accidental contact
• Restores appearance when the original cover is cracked, discolored or broken
• Helps prevent direct glare from the lamp

• Disconnect power before servicing to avoid electric shock.
• Remove shelves or retainers as needed for access; handle the cover gently to avoid cracking.
• Reuse original mounting clips or screws if present; replace any damaged fasteners.
• No wiring changes required; this is a direct-fit cosmetic/ protective replacement.

Fix exposed or damaged sensor areas with this refrigerator sensor cover assembly. Clips into place with a simple screwdriver removal. Quick 5-minute fix.