Parts for Lg LRONC0705V/00: Case Parts

This adjustable leg assembly provides a height-adjustable support foot that levels and stabilizes your appliance for quieter, more reliable operation. It replaces a worn or damaged leveling leg to restore proper balance. What it does

• Allows fine height adjustment to level the appliance on uneven floors
• Helps reduce rocking, vibration and excessive noise during use
• Restores proper clearance and alignment for doors and panels that fail to close evenly
• Provides a durable support point that carries cabinet weight safely

• One adjustable leg assembly

• Disconnect power and water before working on the appliance
• Empty the appliance and have a helper hold it steady when tilting or lifting
• Thread the leg into the base to set desired height; adjust until appliance sits level
• Do not overtighten or force; verify stability on the floor and recheck after a short test run

A molded plastic tray that sits inside the refrigerator fresh room to support produce and contain spills, keeping the crisper area organized and easier to clean. What it does:

• Provides a flat, removable surface for produce and deli items inside the fresh/crisper compartment.
• Catches spills and juices to help keep the drawer and interior cleaner.
• Restores a stable surface when the original tray is cracked, warped, missing, or damaged.
• Helps keep items from sliding when the drawer is opened and closed.

• Remove food and slide the crisper drawer out to access the tray before replacing.
• Align the tray with the drawer rails or support ledges and slide or press into place until seated.
• Clean tray with mild soap and warm water; avoid abrasive cleaners or scouring pads.
• Wear gloves to avoid sharp edges when removing the old piece.

This evaporator door is the inner cover that protects the refrigerator evaporator assembly and channels airflow for efficient cooling. It restores proper airflow paths and helps prevent frost buildup when damaged or missing. What it does:

• Covers and protects the evaporator coil and related components from debris
• Directs cooled air through the freezer/refrigerator compartments for consistent temperatures
• Helps reduce frost and ice buildup around the evaporator when functioning properly
• Supports adjacent components and seals to maintain proper airflow

• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle carefully to avoid bending tabs or cracking the plastic; verify clips align before applying force
• Use basic hand tools; some models may require removal of interior panels or shelves for access
• Fully defrost and dry the area before installing

This replacement vegetable tray is the refrigerator crisper drawer pan that holds fruits and vegetables and restores proper storage space and organization in the fresh-food compartment. What it does:

• Provides a stable bin for storing produce and other refrigerated items
• Replaces a cracked, chipped or warped crisper tray that won't hold contents securely
• Helps keep drawers aligned and sliding smoothly
• Prevents produce from sitting directly on the cabinet floor, aiding airflow and cleanup

• Empty and remove the old drawer before installing the replacement tray
• Slide the tray into the existing tracks or rails until it seats fully
• Handle carefully to avoid chipping or cracking during installation
• Do not force damaged rails or hardware; replace any broken mounting pieces before use

This TV cabinet panel replaces a damaged or missing outer cover to protect internal components and restore the set's appearance. It fits where the original outer housing shields the display electronics and circuit assemblies. What it does:

• Replaces cracked, broken or missing outer TV cabinet material to restore proper fit and finish
• Protects internal electronics and wiring from dust and accidental contact
• Helps maintain the TV's original mounting and screw locations for secure assembly
• Improves cosmetic appearance by replacing scratched or discolored panels
• Supports proper airflow paths around internal components when installed correctly

• Disconnect power and remove all cables before beginning any disassembly
• Remove back panel/trim and mounting screws as required to access and replace the cover
• Handle edges carefully to avoid cuts and protect the display; use soft work surface to avoid scratches
• Keep all original screws and brackets; secure fasteners for a snug fit

This replacement door basket is a molded shelf bin that mounts to the appliance door to hold bottles, jars and small items securely — restores lost door storage and organization. What it does

• Replaces a cracked, broken or missing door shelf bin to restore door storage capacity
• Holds bottles, condiments and small containers so items stay upright during use and access
• Prevents items from shifting or falling when opening and closing the door
• Fits the factory mounting points for a secure, rattle-free fit when installed correctly

• One door basket (shelf bin)

• Inspect factory mounting clips or brackets before installation; replace damaged fasteners separately
• Snap or slide into the door mounts until fully seated; verify it sits flush and is stable
• Clean mounting area and hand-tighten only; avoid using excessive force or power tools
• Unplug or de-energize the appliance (or shut off power) before removing interior trim where applicable

This door basket is a replacement inner storage bin that restores secure storage on the appliance door so bottles and small items stay organized and supported. It matches the OEM shape for a proper fit and clean appearance. What it does:

• Provides a stable shelf on the appliance door to hold bottles, jars, and other small items
• Replaces cracked, warped, or broken bins that let items slip or fall
• Restores proper alignment and retention when the original basket is loose or damaged
• Helps prevent items from moving during normal use

• Disconnect power and empty the door area before removing the old basket
• Typically installs by snapping into existing door mounting clips or sliding into tracks; no special tools required for many models
• Inspect mounting clips or tracks and replace if worn to ensure secure fit
• Handle replacement parts carefully to avoid cracking plastic; do not force into place

This door basket is the refrigerator door bin that holds bottles, condiments and small items securely in the door—restoring lost storage and organization. Designed to replace a cracked, chipped or broken door bin. What it does:

• Replaces a damaged or cracked door bin so items stay upright and organized in the door
• Restores lost storage capacity for bottles, jars and small containers
• Prevents items from falling out of the door when opened
• Matches OEM fit and mounting points for a secure installation

• One door basket / door bin

• Remove items and shelves from the door before replacing the basket
• Typically snaps or slides into existing mounting brackets; no special tools required
• Wear gloves to avoid cuts from sharp edges or broken plastic
• If mounting clips are damaged, inspect and replace them for a secure fit

This overload protector is a compressor safety device that helps stop the compressor if it draws too much current or overheats, preventing damage and helping the refrigerator system run safely. What it does:

• Interrupts compressor power during excessive current draw or overheating to protect the compressor motor
• Can prevent short cycling and repeated restart attempts that damage the compressor
• Commonly replaced when compressor hums but will not start, or when the appliance stops cooling due to compressor protection
• Works as part of the compressor start/protection assembly alongside the start relay and capacitor

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals carefully and reconnect to the matching terminals only; do not modify leads
• Verify the part number against the existing component before installation

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement