Parts for Lg LTNC11131V/00: Case Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This customized screw secures specific appliance components to maintain proper fit and prevent parts from loosening during normal use. Use it when replacing a missing or damaged fastener to restore secure assembly and reduce vibration. What it does:

• Fastens panels, brackets, or components to the appliance frame
• Keeps parts aligned to prevent rattling or movement during operation
• Replaces stripped, missing, or damaged screws that cause loose assemblies
• Helps maintain electrical and mechanical connections by holding parts in place

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack plastic
• Keep removed hardware organized for reassembly; replace any additional damaged fasteners

This replacement screw secures panels and internal components in compatible LG appliances, restoring proper fit and preventing rattles or loose parts. Use it to replace a missing or stripped fastener for a snug, reliable fit. What it does

• Fastens panels, brackets, or components to appliance frame or assemblies
• Helps stop vibration and rattling caused by missing or loose screws
• Restores proper alignment of removable panels or covers
• Works where the original appliance screw has worn, stripped, or gone missing

• Replacement screw as shown

• Disconnect power and water supply to the appliance before beginning any repair
• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid over-tightening to prevent damage to threads or components
• Keep removed screws organized and compare head and length to the replacement before installing

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

This is a replacement power control board assembly (PCB) that restores the appliance's electronic power and control functions so the unit can operate and respond to user inputs. What it does

• Regulates and distributes power to the appliance's circuits and control modules
• Interprets user inputs and coordinates motor, valve, heater, and display operations
• Resolves symptoms such as no power or display, unresponsive controls, or intermittent operation
• Replaces a failed or damaged main control PCB to restore normal electronic control

• Disconnect all power and unplug the appliance before starting any work.
• Handle the board by its edges and avoid touching components; observe electrostatic-discharge (ESD) precautions.
• Verify board part number matches the original before installation.

This shelf assembly is a tempered glass storage shelf that restores stable, easy-to-clean shelving inside the refrigerator. It holds food and containers securely and replaces a cracked, missing, or unstable shelf. What it does:

• Provides a flat, durable surface for storing food and containers
• Tempered glass resists stains and wipes clean for simple maintenance
• Replaces broken, cracked, or sagging shelves to restore usable space
• Helps keep items organized and prevents spills from spreading

• Install on existing shelf rails or supports; ensure shelf sits securely before loading
• Handle tempered glass carefully and wear gloves to avoid cuts
• Replace those parts before installing the shelf
• Unplug appliance or turn off power to interior lights before working in cabinet areas for safety

This shelf assembly is a direct-fit replacement that restores stable storage and visibility inside the refrigerator. The tempered glass surface resists spills and makes cleanup quick so foods stay organized and easy to see. What it does:

• Provides a flat, stable surface for storing food and containers
• Helps contain minor spills on the glass surface for easier cleaning
• Restores proper spacing and support for items on the shelf
• Replaces cracked, chipped, or missing shelves that reduce usable fridge space

• One refrigerator shelf assembly

• Turn off the refrigerator and remove food from the area before replacing the shelf
• Slide the shelf into the existing tracks or support brackets until seated; do not force
• Handle tempered glass carefully; inspect mounting edges and supports for damage
• Replace any broken mounting clips or supports before use

This cover assembly is a molded trim piece used on select LG appliances. It conceals and protects underlying components and restores a clean, secure fit and finish when the original cover is cracked, warped, or missing. What it does:

• Conceals and protects internal wiring/mechanisms from dust, moisture, and accidental contact
• Provides a finished appearance and helps adjacent parts seat correctly
• Common symptoms: cracked/broken tabs, loose or rattling cover, discoloration, missing piece
• Replacement restores proper alignment and secure attachment of the covered area

• One cover assembly

• Disconnect power (and water supply if applicable) before servicing
• Use a non-marring pry tool to release tabs; retain and reuse original screws/fasteners
• Transfer any clips, seals, or brackets from the old cover if present
• Align carefully and secure without overtightening to avoid damaging plastic

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This door foam assembly is a molded insulation block designed to restore the refrigerator door's thermal barrier for improved temperature stability and reduced condensation. It fits behind the door liner to help the cabinet maintain proper cooling. What it does

• Replaces damaged or compressed foam insulation inside the refrigerator door
• Restores the door's thermal barrier to help reduce warm spots and moisture buildup
• Helps minimize vibration and rattling by filling the cavity between liner and outer panel
• Supports the door liner and internal components for proper alignment and sealing

• High-level task: door panel or liner removal is typically required to access the foam
• Disconnect power to the appliance before beginning work
• Handle carefully to avoid tearing the foam or liner; use appropriate trim tools to remove clips

This door foam assembly is a molded insulation block designed to restore the refrigerator door's thermal barrier for improved temperature stability and reduced condensation. It fits behind the door liner to help the cabinet maintain proper cooling. What it does

• Replaces damaged or compressed foam insulation inside the refrigerator door
• Restores the door's thermal barrier to help reduce warm spots and moisture buildup
• Helps minimize vibration and rattling by filling the cavity between liner and outer panel
• Supports the door liner and internal components for proper alignment and sealing

• High-level task: door panel or liner removal is typically required to access the foam
• Disconnect power to the appliance before beginning work
• Handle carefully to avoid tearing the foam or liner; use appropriate trim tools to remove clips

This genuine door basket replaces a cracked, loose, or missing refrigerator door shelf to restore storage on the appliance door and keep bottles and containers secure. It fits into the molded door tracks for a reliable hold. What it does:

• Provides a sturdy shelf for door-mounted storage of bottles, jars, and small containers
• Replaces damaged, cracked, or warped door shelving that no longer secures items
• Re-seats into the door track to stop rattling and prevent items from falling
• Matches the OEM shape and mounting points for correct fit and alignment

• One door basket

• Remove food and existing shelf before installation; align tabs with door tracks and snap into place
• No special tools typically required; apply even pressure to engage both ends
• Inspect surrounding door molding for damage before installing; do not force if alignment is obstructed

This door basket is the replacement basket-style door that secures and contains items inside the appliance's basket area, restoring proper closure and containment for normal use. It helps maintain containment and smooth door operation. What it does:

• Replaces a worn, cracked, or damaged basket door to restore secure containment.
• Keeps items and small parts enclosed during operation to prevent loss or damage.
• Supports proper door sealing and alignment for safe, reliable use.
• Can reduce rattling or movement caused by a loose or broken basket door.

• One door basket as shown.

• Disconnect power and follow all safety instructions in the appliance manual before attempting replacement.
• Some installations may require basic hand tools; handle plastic parts carefully to avoid damage.

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Damper Motor Support is an OEM part for LG refrigerators. It holds the damper motor in place, ensuring proper air flow between the refrigerator and freezer compartments. This support is essential for maintaining the correct temperature balance within the appliance.

Causes of a bad damper motor support can include wear and tear over time, physical damage from impacts, or exposure to moisture that can weaken the support structure. A faulty support can lead to improper functioning of the damper motor, affecting the refrigerator's cooling efficiency.

Symptoms of a bad Damper Motor Support include:

• Inconsistent temperatures between refrigerator and freezer
• Unusual noises coming from the damper area
• Visible damage or cracks in the support
• Reduced cooling efficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This LED assembly restores screen illumination by replacing a failed backlight strip. It helps return even, bright lighting to the LCD panel so pictures and menus are visible again without the dim or dark display caused by burned-out LEDs. What it does:

• Replaces the display backlight to restore screen brightness and uniform lighting
• Can resolve symptoms like dim display, dark bands, flickering backlight, or no visible picture with audio
• Works as the LED lighting component mounted behind the LCD panel to illuminate the image
• Designed to match the original LED layout and connector for a direct replacement

• One LED assembly (backlight strip) as shown

• Disconnect power and remove the display panel and bezel before replacing the assembly
• Handle the LCD and LEDs carefully to avoid damage; avoid touching LED surfaces and circuit traces
• Observe ESD precautions and use appropriate tools;

The Power Cord Assembly is an OEM replacement part for LG refrigerators. It includes the electrical cord and strain relief that links the refrigerator to an external power source.  

This power cord assembly safely delivers electricity from the wall outlet to the internal compressor and fan modules. It facilitates proper cooling functions through this transmission of alternating current.

Symptoms of a bad power cord can include:

• Abnormal sounds such as humming or buzzing from within 
• Tripped circuit breakers interfering with operations
• Indicators of cord damage like frays or exposed wiring
• Inconsistencies in interior temperature maintenance

Causes may involve normal wear over extended use, physical stress, or accidental damage to the cord insulation.  

Replacing the power cord assembly with this genuine LG OEM part restores a reliable electrical pathway. It ensures a continued power supply to keep foods fresh and frozen.