Parts for Kitchenaid 3KSM150PSTDR5: Color Variation Parts

This housing is the main outer cabinet section that supports internal components and helps direct airflow and protect the appliance. Replacing a damaged housing restores proper fit, reduces noise from loose panels, and prevents debris entry. What it does:

• Provides structural support for internal parts and mounting points
• Protects internal components from dust, moisture, and physical damage
• Helps channel airflow for proper operation and venting
• Reduces rattles and vibration caused by cracked or warped panels
• Prevents sharp edges and gaps that can catch clothing or debris

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools are typically required; follow the service manual for panel removal and reassembly
• Handle sharp edges carefully and wear gloves to protect your hands

This housing is the replacement cabinet component that helps protect internal dryer components and maintain proper airflow and alignment. Replacing a damaged housing restores panel fit and helps prevent debris from reaching internal parts. What it does:

• Forms the external or internal cabinet surface that supports and protects internal components
• Helps maintain proper airflow and component alignment for normal operation
• Commonly replaced when cracked, warped, or broken from impact or wear
• Can reduce rattles, gaps, and debris intrusion when installed correctly

• Refer to your model's service manual for disassembly and reassembly instructions
• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; wear gloves to avoid cuts and protect finishes
• Compare the replacement to the original part for fit before final installation

This housing is the outer cabinet panel that supports and protects internal components, helping keep the appliance structure stable and shielding parts from dust and damage. It restores proper fit and appearance after damage or wear. What it does:

• Replaces the appliance's external housing panel to restore structural support and correct alignment of surrounding panels.
• Protects internal components from debris, moisture, and incidental contact.
• Helps eliminate rattling or vibration caused by a damaged or loose housing.
• Supports mounting points used by other service parts.

• One housing panel as pictured and specified by the manufacturer.

• Disconnect power and, if applicable, turn off water supply before starting any repair.
• Use appropriate hand tools; avoid overtightening fasteners which can crack plastic mounting tabs.
• Inspect adjacent panels, gaskets, and mounting hardware and replace if worn to ensure proper fit.

This housing is the outer cabinet piece that supports and protects internal components, restoring structural integrity and alignment for safe, quiet operation. It's the main exterior enclosure where internal parts mount. What it does:

• Replaces a cracked, dented or corroded outer cabinet that lets components sit out of alignment
• Helps stop rattling, vibration or scraping caused by a warped or broken housing
• Restores proper mounting points for internal assemblies and fasteners
• Protects internal wiring and components from debris and moisture

• One outer housing

• Disconnect power before starting any service; follow all safety guidelines
• Basic hand tools required; some panels or components may need to be removed first
• Inspect adjacent mounting hardware and gaskets and replace if worn for best fit

This band trim is a cosmetic finishing piece that covers and protects the visible edge of the appliance door or cabinet for a clean, factory look. It refreshes appearance and helps keep dirt and moisture out of the seam. What it does:

• Covers and finishes the exposed edge of a door or cabinet for a uniform appearance
• Helps reduce dirt and grime buildup along the seam between panels
• Restores a worn, scratched, or missing trim to improve overall appliance appearance
• Works with existing door/cabinet mounting points to sit flush with surrounding surfaces

• Disconnect power to the appliance before starting repairs and work on a cool, dry surface
• Remove any clips or fasteners holding the old trim; save reusable hardware
• Align the new trim with the edge and press or secure into place using the original mounting points
• Replace them with OEM-specified hardware

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

This planetary gear assembly transfers motor torque through the transmission to drive the agitator/drum, restoring proper mechanical motion. Replaces a worn or damaged planetary to reduce grinding, slipping, or no-agitation symptoms and improve drivetrain reliability. What it does:

• Meshes with the transmission sun gear to convert motor rotation into the correct output for the agitator/drum
• Restores normal agitation/rotation when original gears are worn, broken, or skipping
• Helps eliminate grinding, clunking, or intermittent movement caused by damaged internal gears
• Works as a direct-fit replacement when the original planetary gear has failed

• Refer to the appliance's service manual or exploded parts diagram for correct disassembly and reassembly steps
• Disconnect power and water (if applicable) before beginning repairs to avoid shock or injury
• Inspect surrounding gears, bearings, and seals; replace any additional worn components to prevent premature failure
• Use appropriate tools and torque specs;

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values