Parts for Kitchenaid KSM195PSCA5: Color Variation Parts

This housing is the outer cabinet component that protects and supports internal appliance parts, keeping wiring and assemblies secure for reliable operation. It restores proper fit and helps prevent loose components or rattling. What it does:

• Protects internal components and wiring from damage and debris
• Provides structural support and correct alignment for mounted parts
• Helps reduce noise from loose or damaged internal assemblies
• Can cause fit, sealing, or operational issues if cracked or distorted

• Disconnect power before servicing to avoid electric shock.
• Handle carefully; edges may be sharp and fasteners may be under tension.
• Basic hand tools typically required; follow the appliance service manual for disassembly order.
• Replace any damaged fasteners or gaskets to ensure proper fit and sealing.

This housing is the main outer cabinet section that supports internal components and helps direct airflow and protect the appliance. Replacing a damaged housing restores proper fit, reduces noise from loose panels, and prevents debris entry. What it does:

• Provides structural support for internal parts and mounting points
• Protects internal components from dust, moisture, and physical damage
• Helps channel airflow for proper operation and venting
• Reduces rattles and vibration caused by cracked or warped panels
• Prevents sharp edges and gaps that can catch clothing or debris

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools are typically required; follow the service manual for panel removal and reassembly
• Handle sharp edges carefully and wear gloves to protect your hands

This housing is the replacement cabinet housing that supports and protects internal appliance components, restoring proper fit and appearance. It helps keep internal parts secure and maintains correct panel alignment for safe operation. What it does:

• Provides a rigid mounting surface for controls, assemblies and wiring
• Protects internal components from dust, moisture and impact
• Maintains panel alignment to reduce vibration and rattling
• Restores correct clearance and fit when an outer cabinet is cracked or warped

• Disconnect power and water before beginning any repair
• Basic hand tools required; mounting screws or clips must be reused
• Handle edges carefully to avoid cuts; wear gloves and eye protection
• Verify fit and orientation with parts diagram before final assembly

This replacement housing restores the appliance's structural cabinet where internal components mount, helping secure parts and reduce vibration. Use this housing to replace cracked, warped or damaged cabinet sections that affect fit and stability. What it does:

• Provides a rigid mounting surface for motors, controls and other internal parts
• Helps maintain proper alignment to reduce vibration, noise and rubbing
• Replaces cracked, broken or distorted cabinet sections that can allow parts to shift
• Prevents moisture and debris from reaching internal components when intact

• One housing cabinet as shown

• Disconnect power and water before starting any repair
• Basic disassembly of exterior panels may be required; retain screws and brackets
• Handle edges carefully — plastic and metal housings can have sharp edges

This housing is a direct-fit replacement housing piece that restores the appliance's exterior support and alignment. It helps maintain proper component positioning and prevents gaps or interference with adjacent panels. What it does:

• Provides structural support for front and/or control-area components
• Keeps internal parts aligned to prevent rubbing or noise
• Restores correct gap and seal between panels for safe operation
• Helps eliminate vibration-related movement and wear

• One housing

• Verify power is disconnected and appliance is fully isolated before starting
• Handle edges carefully; wear gloves to avoid sharp sheet-metal contact
• Use OEM fasteners and follow manufacturer torque guidance where specified

This housing is the outer cabinet section that supports and protects internal components, restoring the appliance's structural integrity and appearance. Use it to replace cracked, dented, or warped housings that can expose parts or cause alignment issues. What it does:

• Covers and protects internal components from debris, moisture, and impact
• Restores proper alignment and fit of doors, panels, and controls
• Helps reduce vibration and rattling caused by damaged or warped panels
• Addresses visible damage like cracks, dents, or large scratches that affect function or appearance

• Installation requires removing trim and disconnecting power
• Handle carefully to avoid scratching the finish; protective gloves recommended
• Verify fastener locations and grounding connections before reassembly

This housing is the outer cabinet piece that supports and protects internal components, helping keep the appliance stable and contained. Replacing a damaged housing restores proper fit, reduces vibration, and prevents debris or water from reaching internal parts. What it does:

• Provides structural support for internal assemblies and panels
• Protects electronics, motors, and other components from impacts and contamination
• Keeps internal parts aligned to reduce rattling or excessive vibration
• Helps prevent leaks or entry of debris that can cause malfunctions
• Common symptom: visible cracks, breaks, warping, or loose/torn mounting points

• One cabinet housing

• Disconnect power (and water supply if applicable) before beginning any repair
• Handle edges carefully — housings and mounting tabs can be sharp or brittle
• Basic hand tools typically required; follow OEM instructions for disassembly/reassembly
• If clips, gaskets, or fasteners are damaged, replace them to ensure a secure fit

This replacement cover protects and secures internal components and wiring, restoring a finished appearance and helping prevent debris intrusion. It's a like-for-like exterior housing piece used on compatible Whirlpool appliances. What it does

• Covers and protects internal electronics, terminals, and wiring from dust and accidental contact
• Restores the appliance's finished exterior where the original cover was missing or damaged
• Helps maintain proper airflow paths and component positioning when installed correctly
• Can reduce vibration-related noise by keeping parts secured and enclosed

• One cover

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Removal/installation usually requires removing a few screws and lifting the old cover off; keep fasteners for reassembly
• Handle edges carefully; use gloves to avoid cuts and protect painted surfaces

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

This gearcase is the washer transmission assembly that transfers motor power to the agitator and spin basket, restoring proper agitation and spin for top-load washers. It replaces a worn or damaged gearbox to help get cycles working correctly. What it does:

• Converts motor rotation into the agitator and tub motion for wash and spin cycles
• Restores normal agitation when worn gears cause weak or no agitation
• Helps eliminate grinding, clunking, or abnormal noises from the washer drive area
• Supports proper spin operation when a failing gearbox prevents the tub from reaching speed

• Disconnect power and water before beginning service.
• Service typically requires tub/cabinet disassembly and removal of the old gearcase; follow the washer's service manual.
• Some applications may require new seals, gaskets, or fasteners.

A replacement drive gearcase that transfers motor power to the appliance's moving components, restoring proper mechanical motion and reducing grinding or slipping. Ideal when worn gears cause noisy operation or loss of drive. What it does:

• Houses the gears that transmit motor torque to the agitator/pump/drive shaft
• Restores consistent mechanical movement when worn or damaged gears cause slipping
• Stops metal-on-metal grinding and excessive noise from a failing gear assembly
• Helps resolve intermittent or complete loss of drive to the appliance's moving parts

• One gearcase assembly

• Recommended for technicians or experienced DIYers; verify orientation and gear engagement before final reassembly
• Disconnect power and, if applicable, water supply before servicing
• Inspect mating components (shaft, seals, mounts) for wear and replace if damaged
• Use manufacturer torque and alignment instructions when tightening fasteners