Parts for Whirlpool WFW5090GW0: 02 - Console And Cabinet Parts

This clip is a small plastic retainer used to secure appliance wiring, panels, or components in place to prevent rubbing or displacement. Replacing a broken clip restores proper routing and helps reduce noise and wear. What it does

• Holds wiring harnesses or small panels firmly to prevent chafing or loose connections
• Keeps trim or interior panels aligned to stop rattles and improve fit
• Prevents movement that can lead to abrasion or intermittent electrical issues
• Works where a small snap-in retainer is required to secure parts

• One clip / retainer

• Disconnect power to the appliance before starting any work
• Typically installs by snapping into a matching slot; basic hand tools may be helpful
• Inspect surrounding parts and harness for damage when replacing the clip

This replacement control panel restores the appliance's front console so buttons and displays are mounted and protected, helping return full user control and visible status feedback. Designed to match original fit and function for straightforward replacement. What it does:

• Provides the user interface surface that holds push buttons, overlays, and display windows
• Restores readable status indicators and tactile button response when the original panel is cracked, faded, or damaged
• Supports the proper alignment and protection of underlying electronic controls
• Helps resolve symptoms like unresponsive buttons, missing button labels, or cosmetic damage to the console area

• One control panel (front console) as shown

• Disconnect power before starting; follow basic appliance safety procedures
• Minor disassembly of the appliance's front fascia may be required; keep fasteners organized
• Avoid touching electronic boards; handle with care to prevent static or physical damage

The Washer Door Latch is an OEM part for Whirlpool washing machines. This latch is responsible for securely holding the washer door closed during operation. It plays a role in making sure there are no leaks that could damage clothing or disrupt the washing cycle.

Causes of a bad door latch can include wear and tear over time, accidental damage, or failure of the latching mechanism. 

Symptoms of a bad door latch include:

• The washer door not closing or locking fully
• Loose door that rattles or vibrates excessively
• Water leaks around the opening when the machine is running

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This adjustable leveling foot restores stable, wobble-free operation by allowing precise height adjustment for appliance leveling. Easy to set, it helps keep the appliance balanced and reduces noise and vibration. What it does:

• Provides adjustable height to level the appliance on uneven floors
• Stabilizes the appliance to reduce rocking, vibration, and movement
• Helps maintain proper door alignment and water drainage
• Prevents wear from excessive vibration

• Turn off and unplug the appliance before attempting any adjustments
• Support the appliance securely before removing or adjusting feet
• Thread foot in or out to adjust height; recheck level and appliance stability after adjustment

This complete wire harness routes power and signals between a unit's control and electrical components to restore correct electrical connections and reliable operation. Fits where the original multi-connector harness has failed or been damaged. What it does:

• Re-establishes electrical connections between controls, motors, sensors, and other components
• Replaces worn, frayed, or damaged wiring that can cause intermittent operation or component failures
• Helps resolve symptoms like no power to specific components, erratic control behavior, or blown fuses/tripped breakers
• Provides factory-style connectors and routing for a direct fit when the correct harness is specified

• Always disconnect power (unplug appliance or turn off breaker) before starting any repair
• Handle connectors by the plugs, not the wires; ensure all terminals are fully seated and locked
• Verify harness routing and secure with original clips/ties to prevent pinching or heat exposure

This replacement console is the control panel assembly that holds the oven/range buttons and display, restoring user control and visible status information. It replaces a damaged, cracked, or non-responsive console to regain normal operation. What it does:

• Houses the control buttons, touchpads, and display used to set bake, broil, timers and other functions
• Transfers user input to the range's control board so cycles and settings start as commanded
• Restores a cracked, bent or cosmetically damaged front surface for a clean appearance
• Helps address symptoms such as unresponsive buttons, missing/obscured display elements, or visible physical damage

• Disconnect the appliance from power before servicing to avoid shock or injury
• Remove any trim/retaining screws and carefully disengage the console from the range front or backguard
• Note and gently disconnect wiring and ribbon connectors — avoid pulling on wires
• Reinstall in reverse order, then restore power and test functions

This replacement refrigerator door handle restores a secure, comfortable grip for opening and closing the door while improving the appliance's appearance. Designed to match the original fit and mounting points for an easy swap. What it does:

• Replaces a cracked, broken, loose, or missing door handle to restore safe door operation
• Provides a solid grip so the door seals and operates properly
• Prevents further cosmetic damage and avoids awkward opening
• Matches original mounting locations for correct alignment

• Disconnect power and empty door pockets or contents before starting
• Use the factory screws/fasteners; install with care to avoid stripping threads
• Tighten fasteners securely but do not overtighten to prevent cracking

The Control Board is an OEM component specifically designed for Whirlpool top-load washing machines. Located inside the washer cabinet, it regulates all cycle functions, components, and associated electronics.

Symptoms of a faulty control board include the washer failing to start despite input, running constant agitation without pause, or inability to progress through phases of designated cycles.

Symptoms of a bad control board include:

• Cycles run erratically or fail to change stages
• Washer remains unresponsive or inactive  
• Water fails to drain or dispense properly
• Fault lights or error codes are frequently shown

This OEM Whirlpool replacement control board ensures smooth, reliable operation. Installed promptly, its robust circuits minimize component connection issues to improve machine life.

Compatible with some GE and Hotpoint models.

This RFI noise filter conditions the AC power entering your microwave, reducing electrical interference and helping protect and stabilize the control and power circuits. Replace it if the unit is dead or trips a breaker when starting.

• Filters radio-frequency/electromagnetic noise on the incoming AC line
• Helps stabilize power to the control, relays, lights, and fans
• Failure may cause no display or intermittent loss of power
• A shorted filter may blow the line fuse or trip the household breaker when plugged in or when Start is pressed

• Disconnect power by unplugging the microwave or switching off the dedicated circuit breaker
• For over-the-range units, remove the microwave from the wall to safely access internal components
• Label and transfer wires to matching terminals; mount the filter securely and route wiring away from sharp edges

This replacement clamp secures flexible hoses to fittings to prevent leaks and keep connections stable. It helps restore a watertight seal and reduces hose movement that can cause noise or disconnection. What it does:

• Holds a rubber or plastic hose firmly on a barb or fitting to prevent leaks
• Reduces vibration and hose slippage that can cause rubbing or noise
• Helps stop intermittent leaks at hose connections
• Restores proper hose routing and connection security

• Disconnect power and water supply before servicing; drain residual water to avoid spills
• Use appropriate pliers or a screwdriver to remove the old clamp and install the replacement
• Position clamp over the hose barb and tighten until snug—do not overtighten to avoid damaging the hose
• Inspect hose and fitting for wear or damage and replace if needed