Control Board

Fix a dim or blank oven display and unresponsive buttons with a new clock timer control board. Straightforward repair for failed digital displays.

This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:

• Controls bake/broil circuits to run selected cooking modes
• Monitors the oven temperature sensor and regulates heat to the set temperature
• Drives the time-of-day and countdown timer display
• Interprets keypad inputs for mode selection and settings
• Failure symptoms can include no heat or erratic heat, a blank or flickering display, or unresponsive buttons

• One electronic control board assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use anti-static precautions and handle the board by its edges
• Photograph wiring and transfer connectors one at a time to the same positions
• Reuse the existing mounting hardware and any faceplate/overlay as required; set the clock after restoring power

Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.

Fix an oven that won't heat, shows error codes, or has an unresponsive display. This control board regulates heating elements and oven functions.

This oven control board manages the range's bake and broil functions, temperature regulation, and the display/timer. Replacing a failed board restores accurate heating and responsive controls so the oven starts, runs, and shuts off as expected.

• Regulates bake and broil element relays based on temperature-sensor feedback and user settings
• Powers and manages the clock, timer, and oven display interface
• Common symptoms of failure: no bake/broil heat, blank or unresponsive display, beeping or error codes, oven won't turn off, or erratic temperature
• Helps restore consistent preheating and temperature control when the existing board is faulty

• Disconnect power at the breaker before servicing; verify no power is present
• Access the board from the control panel/backguard area
• Photograph wiring, then move connectors and mounting hardware to the new board one-for-one; handle electronics by the edges to avoid ESD damage
• After reassembly, restore power and test bake and broil functions and the display/keys

LED display module that replaces the control-panel display to restore visible readouts and indicator lights so you can monitor appliance status, settings and error information at a glance. What it does:

• Replaces a failed or damaged control-panel LED display to restore readable numeric and icon readouts.
• Helps fix symptoms such as a blank, dim, flickering, or partially missing display.
• Makes error codes and status indicators visible again for easier troubleshooting.
• Designed to interface with the appliance's existing control board and connectors.

• Disconnect power to the appliance before starting any repair to prevent electrical shock.
• Remove the control panel or trim per the service manual and handle the display by its edges to avoid damage.
• Carefully disconnect and reconnect the ribbon/plug-style connector; confirm correct orientation before powering up.

If your range display blanks out, shows error codes like F8:E0, or doesn't respond to controls, the electronic control board likely failed. Restores normal operation.

Fix E01 error codes or a dryer that won't start with this control board replacement. Controls drying time and temperature settings. Moderate DIY repair.

Fix a dryer that won't start, won't advance cycles, or has a smoking timer. This control timer restores proper cycle operation. DIY repair in 1 hour.

Fix a refrigerator that won't cool or has unresponsive controls. This main control board coordinates the compressor, defrost cycle, and user interface.

Dryer won't turn off or advance cycles? This control timer regulates cycle progression and automatic shutoff. Moderate DIY repair restores timing.

Display blank or controls unresponsive? This oven control board manages the clock, timer, and cooking functions. Moderate difficulty repair restores operation.

Fix F10 or F11 error codes with this range electronic oven control board. Restores accurate temperature control and timer functions. Moderate DIY repair.

Due to manufacturer changes harness supplied in kit must be used. On refrigerator models manufactured prior to 2016, the dispenser board may also need to be replaced.

Fix unresponsive controls or blank displays with this side-by-side refrigerator control board. Restores temperature management and user interface functions.

Fix a blank display, unresponsive keypad, or LOC error on your range. This electronic control board manages oven functions and timing. Moderate DIY repair.