Parts for Thermador PDR364GDZS/05: Control Panel / Knobs Parts

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

The Spark Ignition Switch is an OEM part for Bosch ranges and cooktops. It controls the ignition of surface burner flames by emitting an electrical spark when activated.

Causes of a bad switch can be general wear and fatigue over thousands of start cycles. Exposure to moisture, dust or metal debris could also damage electrical components internally.

Symptoms of a bad spark ignition switch include:

• Burners failing to light even when valves are turned on
• Intermittent or irregular lighting of some burners
• No electrical sparks emitted from the ignition electrode

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This rotary potentiometer converts shaft rotation into an electrical signal the control board can read, providing precise position feedback for user selections. Replace it if inputs become erratic, jump between settings, or the control stops responding.

• Provides rotary position feedback to the electronic control
• Enables accurate selection and adjustment of functions or setpoints
• Wear or damage can cause drifting, dead spots, or incorrect readings
• Intermittent or no response to input is a common failure symptom

• Disconnect power before servicing
• Access the control/console area to reach the component
• Note shaft orientation and any connector positions; transfer exactly to the new part
• Handle electronics with ESD care and verify smooth, full-range operation after reassembly

This fixing kit provides the mounting hardware needed to secure appliance components and panels during repair, helping restore proper fit and reduce vibration or movement after service. What it does:

• Supplies the hardware used to fasten panels, brackets, or assemblies in place
• Helps eliminate loose or rattling parts caused by missing or damaged fasteners
• Restores correct alignment of secured components after repair
• Useful when replacing internal assemblies that require new or replacement fasteners

• Disconnect power and water before beginning any repair
• Use the correct tools and follow OEM instructions or service manual steps
• Keep all small parts and fasteners away from children and pets

Solenoid valve controls the appliance's water inlet using an electrically actuated plunger to open and close flow. Replacing a failing valve helps restore proper filling and can stop leaks, overfilling, or no-fill conditions. What it does

• Electrically opens and closes the inlet to allow water into the appliance during fill cycles.
• Shuts off water flow when the valve is de-energized to prevent overfilling.
• Common symptom fixes: no water fill, continuous filling, visible leaks at the inlet, or related fill/flood error codes.
• Interfaces with the appliance inlet hose and the electrical connector for timed/controlled fill cycles.

• One solenoid valve.

• Disconnect power and shut off the water supply before starting any repair.
• Handle electrical connectors carefully; ensure correct orientation and a secure connection.
• Inspect and replace any worn seals, gaskets, or hoses to prevent leaks after installation.

A replacement selector knob that lets you turn and choose appliance settings smoothly and safely. Restores a damaged, loose, or missing control knob so you can change cycles and temperatures with confidence. What it does:

• Fits onto the control shaft to select functions, cycles, or heat levels
• Replaces cracked, stripped, or worn knobs that won't stay set or slip during use
• Stops erratic control feel and restores a positive detent or indexed rotation
• Works with the matching control shaft shape

• Disconnect power to the appliance before servicing
• Align the knob splines with the control shaft and push straight on until fully seated
• If knob is stiff, check for debris on the shaft; do not force or hammer the knob into place

A slimline control knob that replaces worn or damaged range/oven knobs to restore a secure grip and precise temperature/setting control. Designed to match original fit and feel for reliable operation. What it does:

• Replaces a broken, cracked, or stripped control knob so settings can be changed safely and accurately
• Fits the appliance's keyed/stamped shaft to provide a secure, non-slip connection
• Helps prevent accidental setting changes by providing a firm tactile grip
• Restores visual finish to the cooktop or control panel

• Disconnect power (and gas supply if applicable) before servicing controls
• Align the knob's internal spline with the valve shaft and push straight on until seated; do not force
• Test operation after installation to confirm proper seating and control response

This temperature display assembly provides the front display used to show oven temperature and user feedback, restoring a clear, readable temperature readout and control indications. What it does:

• Displays current oven temperature and control/status information on the front panel
• Replaces cracked, dim, faded, or non-responsive temperature display components
• Helps resolve symptoms like unreadable characters, intermittent or blank temperature readout, or incorrect display feedback
• Interfaces with the control board to present user temperature and mode information

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the display and any attached ribbon cables or connectors carefully to avoid damage
• Installation typically requires removing the control panel or oven door trim to access the display assembly
• After installation, restore power and verify the display shows temperature and control information correctly

This slimline standard control knob replaces a worn, cracked, or missing front-panel knob to restore reliable control and a clean appearance. It fits slim-profile control shafts and matches factory styling. What it does:

• Replaces a stripped, broken, or missing control knob so you can operate the appliance again.
• Provides a secure push-on fit to the control shaft for accurate selection of settings.
• Restores original appearance on slimline control panels for a neat finish.
• Works as a direct-fit user interface part—no electronic changes required.

• One replacement slimline standard control knob.

• Typically installs with a simple push-on or pull-off action; inspect the control shaft for damage before installing.
• Disconnect power to the appliance before servicing to avoid injury.
• If knob does not seat smoothly, do not force—verify shaft type and alignment.