Parts for Frigidaire FFGC3015QBA: 02 - Cook Top Parts

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

• Escaping heat from the oven chamber, reducing efficiency
• Flames or sparks visible around the cap during baking
• Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

• Uneven or yellow flames
• Difficulty in igniting the burner
• The burner cap being cracked, chipped, or discolored
• Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

• Uneven or unstable flame
• Difficulty in igniting the burner
• Visible cracks or chips on the cap
• Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This single replacement control knob restores safe, easy control of a range or oven when the original knob is missing, cracked, or worn. It provides a simple push-on replacement to make temperature and function selection straightforward again. What it does

• Replaces a damaged or missing control knob so you can set heat and cooking functions reliably
• Helps eliminate loose, cracked, or non-engaging knobs that make adjustments difficult
• Restores user interface for precise setting selection on ranges and ovens
• Works as a direct, single-knob swap to regain normal operation

• Disconnect power (or shut off gas) and allow appliances to cool before servicing
• Align the knob on the control shaft and push firmly until it seats; do not force if it resists
• If knob uses a retaining screw, tighten securely but avoid over-torquing

This replacement door gasket creates a tight seal around the refrigerator or freezer door to help maintain interior temperature and reduce energy loss. It restores proper door closure for better cooling and frost prevention. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain consistent internal temperatures for food safety
• Reduces frost build-up and compressor runtime due to air leaks
• Restores proper door alignment and closing performance

• Remove old gasket and clean the door mating surface before installing the new gasket
• Start installation at a corner and work around the door to ensure an even fit
• Gasket may be warmed slightly (hot water or hair dryer on low, if needed) to improve flexibility for positioning
• Unplug or disconnect power to the appliance before beginning work

This refrigerator door gasket seals the cabinet door to keep cold air in and help the appliance maintain proper temperature. It replaces worn, torn, or misshapen gaskets to improve cooling efficiency and reduce frost buildup. What it does

• Creates an airtight seal between the door and cabinet to prevent cold air loss.
• Helps reduce frost and ice buildup by keeping warm, humid air out of the compartment.
• Can stop symptoms like excessive run cycles, warm spots, or visible gaps around the door.
• Restores proper door closing and alignment when the original gasket is damaged or deformed.

• High-level fit: Intended as a direct-replacement gasket.
• Prep tip: Remove food and shelves near the door area, and work with the door open on a stable surface.
• Safety: Unplug the appliance or disconnect power before doing any repairs.
• If the gasket is stiff, warming it slightly can make installation easier; avoid using open flames or excessive heat.

Note: Quantity of two brackets

Replacement mounting screw used to secure panels and small components on compatible appliances. Restores proper fastening to reduce rattling and keep trim, control panels and brackets aligned for safe, quiet operation. What it does:

• Secures panels, trim, brackets and other small appliance components.
• Replaces loose, missing or damaged fasteners that can cause rattling, gaps or panel misalignment.
• Restores mechanical stability for control panels and interior trim pieces.

• Disconnect power to the appliance before servicing any panels or components.
• Use the correct screwdriver and start the screw by hand to avoid cross-threading.
• Tighten securely but do not overtighten; replace if threads are stripped or the screw will not secure the part.