Parts for Jenn-Air JGC7636BS0: Cooktop, Burner And Grate Parts

This burner grate is a replacement cooktop grate that supports cookware and restores a stable cooking surface. Designed to match original fit and clearance for safe, reliable use on compatible gas ranges. What it does:

• Supports pots and pans above the burner for even heating and stable cooking
• Replaces damaged, warped, or missing grates that cause wobbling or unsafe cookware placement
• Helps maintain proper flame pattern and cookware clearance when the grate is correctly seated
• Restores the cooktop's original look and functionality after chipping or heavy wear

• Allow the cooktop to cool completely and turn off all gas/power before handling
• Lift old grate straight up to remove; set replacement into position so feet align with cooktop rests
• Handle with care — grates can be heavy or have sharp edges; use gloves if needed
• No special tools required for typical drop-in replacements;

This burner grate is a replacement cast-iron support that holds cookware over a gas burner, restoring a stable cooking surface and proper pot/pan alignment. It helps keep cookware steady and protects the cooktop finish. What it does:

• Replaces a broken, warped, or missing burner grate to restore safe cookware support
• Provides a stable surface for pots and pans so burners heat evenly
• Reduces movement and tipping of cookware during cooking
• Helps protect the cooktop surface from direct flame contact and spills

• Allow the range to cool and turn off gas/electric supply before replacing
• Lift out the old grate and set the new grate into position; no special tools typically required
• Ensure the grate sits flush and does not wobble before use

This replacement burner grate restores a stable, level surface for cookware on your cooktop, helping ensure even heating and safe cooking. It's a direct-fit replacement designed to match the original stove configuration. What it does:

• Supports pots and pans over the cooktop burner for stable cooking
• Centers cookware to help maintain even flame contact and consistent heat distribution
• Replaces cracked, warped, or damaged grates that can cause instability or uneven cooking
• Helps prevent cookware from tipping and reduces risk of spills

• No special tools usually required; grate simply sets into place on the cooktop
• Allow cooktop to cool completely before removing or installing the grate
• Inspect surrounding cooktop components for damage during replacement
• If burners do not light or flame is uneven after installation, verify burner caps and ignition ports are properly positioned and clean

This burner cap is the removable top piece that sits over a gas cooktop burner, protecting the burner head and helping distribute flame for even cooking. It replaces worn or damaged caps to restore proper burner performance. What it does:

• Covers and protects the burner head from spills, debris, and direct impact
• Helps direct and shape the gas flame for consistent heat distribution
• Can prevent uneven heating or flame lift caused by warped or damaged caps
• Common replacement for visible chipping, cracking, or poor flame pattern

• One burner cap as shown

• No special tools required; lift off the old cap and set the new cap into place on the cooled burner
• Ensure the burner head is seated correctly and free of debris before installing the cap
• Turn off gas and power to the appliance before servicing; follow all safety guidelines

This burner cap sits on top of a stovetop burner head to protect the burner and help shape the flame for even cooking. It restores proper flame pattern and prevents spills from entering the burner assembly. What it does:

• Covers and protects the burner head from food and liquid spills
• Helps shape and stabilize the burner's flame for more even heat
• Prevents flame irregularities caused by a damaged or misaligned cap
• Can resolve uneven or partially blocked flames when the cap is the cause

• One burner cap

• Ensure the range is off and the surface is completely cool before servicing
• Remove the old cap by lifting straight up; set the new cap into place without forcing
• Clean the burner head and surrounding area before installing for best seating and performance

This replacement burner cap covers and protects the gas burner head while helping shape the flame for even cooking. Fits sealed top gas cooktops and restores proper burner geometry for safer, more consistent heat. What it does:

• Centers and shields the burner head from spills and debris
• Helps maintain an even flame pattern for consistent cooking
• Prevents direct contact between flame and cookware bottoms
• Replaces cracked, warped, or missing caps that cause uneven heating

• One burner cap

• Turn off gas and ensure the cooktop is completely cool before servicing
• Remove old cap, clean burner area, and seat new cap flat and centered over the burner head
• No tools typically required; if cap is stuck, loosen with gentle rocking—do not force
• Inspect for proper fit and test burners at low flame to ensure correct seating

This replacement burner head restores the gas flow path on a cooktop surface burner so the burner produces an even, reliable flame for cooking. It's a direct-fit part used to repair burners that do not light properly or heat unevenly. What it does:

• Directs gas from the orifice to the burner ports so fuel ignites across the ring
• Helps maintain an even, steady flame for consistent cooking temperatures
• Can address symptoms like weak or uneven flame, burner that won't light, or partial ignition
• Works with the burner cap and orifice as part of the burner assembly

• Turn off the gas supply and power to the appliance before removing the old part
• Remove burner cap and verify the orifice and ports are clean before installing the new head
• Seat the burner head and cap properly; test for correct lighting and flame pattern after reassembly
• If you smell gas or see an unsafe flame, stop.

This round control knob replaces a worn, cracked, or missing front-panel control knob so you can easily select settings and restore a secure grip. It restores normal user control and provides a clear pointer for setting positions. What it does:

• Replaces a damaged or missing dial so controls turn smoothly and stay set
• Provides a clear indicator pointer for selecting cycles or temperature settings
• Restores a secure, non-slip surface for reliably adjusting controls
• Helps eliminate wobble, looseness, or slipping on the control shaft

• One control knob

• Disconnect power to the appliance before starting any work
• Most installations are simple: pull the old knob straight off the control shaft and push the new knob fully into place
• If knob does not seat, check for correct alignment with the control shaft splines; do not force
• If any broken plastic or shaft damage is present, inspect the control panel or shaft and replace as needed

This Holder ORF is a small plastic retainer that secures the ORF assembly in place, keeping components aligned so they function reliably. It replaces a worn or broken retainer to restore proper fit and operation. What it does

• Secures the ORF assembly or related component to prevent movement or misalignment
• Helps stop rattling, shifting, or loose internal parts that can cause noise or improper operation
• Restores the original fit where the factory retainer has cracked, broken, or worn
• Works as a direct replacement when the diagram or parts list specifies a Holder ORF

• One Holder ORF retainer

• Disconnect power to the appliance before attempting any service
• Access the part following the appliance's OEM service instructions or parts diagram
• Replace the retainer by removing any clips or fasteners holding the old piece, then install the new retainer in the same orientation

This surface ignitor is the replaceable ignition electrode used on gas cooktop burners to create the spark that lights the burner for reliable ignition. Restores safe, consistent lighting when the original ignitor fails. What it does:

• Produces the spark that ignites the burner gas for surface cooktop operation
• Commonly replaces worn or damaged electrodes that prevent burners from lighting
• Helps stop intermittent sparking or weak sparks that lead to delayed ignition
• Works with the cooktop's ignition module and switch to coordinate spark timing

• One surface ignitor (electrode) as pictured

• Disconnect electrical power and shut off the gas supply before starting work
• Handle ceramic/glass cooktop surfaces carefully to avoid cracks or scratches
• Inspect wiring and connectors; replace any damaged terminals or insulation
• After installation, test each burner to ensure proper spark and ignition

This surface igniter is the replaceable ignition element for a gas range surface burner. It provides the spark/heat needed to light burner gas so your cooktop lights reliably and heats when working correctly. What it does:

• Creates the spark or glows to ignite gas at a surface burner
• Restores reliable ignition when a burner won't light or takes multiple attempts
• Addresses symptoms like weak glow, no spark/click, or intermittent ignition
• Works as a direct replacement for a worn or cracked igniter element

• Disconnect power and shut off the gas supply before starting any service
• Handle the igniter carefully; avoid touching the ceramic/glowing tip or bending terminals
• Use basic hand tools; access steps and wiring locations

This surface igniter is the replacement electrode that creates the spark to light a gas range surface burner, restoring reliable burner ignition and consistent cooking performance. What it does:

• Produces the spark that ignites gas at the surface burner
• Replaces a cracked, glazed, or non-sparking igniter
• Addresses symptoms like repeated clicking, weak/no spark, or a burner that won't light
• Works as the single ignition electrode for surface top burners

• Always shut off power and gas supply before beginning service
• Handle the ceramic tip carefully to avoid cracking or contamination
• Verify correct alignment and secure electrical connection for reliable sparking

This genuine mounting screw secures appliance panels and components to keep assemblies aligned and stable. A simple but essential fastener for restoring proper fit and preventing loose or vibrating parts. What it does:

• Fastens trim, panels, brackets or small assemblies in place
• Restores secure attachment when original screws are missing or stripped
• Helps eliminate rattling or movement caused by loose fasteners
• Works wherever the OEM-designated screw is specified in the parts diagram

• Disconnect power before accessing internal components; follow all manufacturer safety instructions
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten — snug until secure to avoid damaging threads or panels
• Keep small parts away from children and pets during repair