Parts for Ikea IGS350BW0: Cooktop Parts

Color: White

This control knob fits the surface burner valve and lets you turn the burner on and adjust flame level. A fresh knob restores clear settings and smooth control when the old one is cracked, stripped, or missing.

• Controls the surface burner's valve for on/off and flame adjustment
• Replaces worn, cracked, or hard-to-read knobs
• Helps when the knob is loose, won't turn the stem, or the indicator is faded
• Direct, slide-on design for the correct valve stem type

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the valve stem; align and press the new knob on
• Do not force—verify stem shape and orientation for a proper fit
• Test burner operation and ensure the knob turns smoothly and points to the correct markings

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

This is a replacement black burner grate for gas ranges. It provides a stable cooking surface so pots and pans sit securely over the burner, restoring safe, even cookware support. What it does:

• Supports pots and pans above the burner for stable cooking
• Restores proper pot-to-flame positioning for consistent heating
• Replaces warped, cracked, chipped or missing grates that cause cookware wobble
• Protects the cooktop surface from direct contact with hot cookware

• Designed for drop-in replacement; no special tools usually required
• Allow the cooktop and grate to cool completely before handling
• Inspect burners and ports for debris before reinstalling the grate
• If you smell gas or detect a problem with burner operation, stop use and have the appliance serviced.

The Clip is an OEM component specifically designed for Whirlpool ranges. This clip plays a role in securely holding and mounting components within the appliance. 

The clip is designed to securely grip parts in place, preventing unwanted movement or dislodging that could impact the operation or result in damage. It allows for components to be effortlessly installed while remaining firmly affixed. 

Causes of a bad clip can include wear and tear over time, damage due to excessive force or impact, or deterioration from heat exposure. 

Symptoms of a bad clip include: 

• Loose or detached components inside the appliance 
• Increased vibration or unwanted noise during operation
• Components that are not sitting securely or properly installed
• Difficulty accessing or removing parts that rely on the clip 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

This bumper is a small cushioning stop used at contact points on the appliance. It absorbs impact and prevents metal-to-metal contact to reduce noise and protect surfaces when doors, drawers, lids, or racks close.

• Cushions closing to soften impact and protect finishes
• Serves as a stop to maintain proper spacing at the contact point
• Helps reduce slamming, squeaks, and rattles
• Replace if cracked, flattened, missing, or if new clunking noises occur when closing

• Disconnect power (and shut off water/gas if applicable) before servicing
• Note the bumper's original location and orientation
• Remove the old bumper and clean the mounting area or hole
• Press the new bumper fully into place and verify a secure fit and proper clearance

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Color: Black. Measures about 3 inches in diameter. For grey use WP98017461.

This replacement screw secures appliance panels and components. Use this OEM fastener to swap out stripped, corroded, or missing hardware so assemblies stay tight, aligned, and quiet for reliable day-to-day operation.

• Provides secure attachment for panels, brackets, and internal assemblies
• Direct replacement for stripped, corroded, or lost screws
• Can help with symptoms like vibration, rattling, or loose/misaligned parts
• Supports proper fit to reduce gaps or unwanted movement

• Disconnect power; for gas or water appliances, shut off the supply before service
• Note hardware order and retain any spacers or clips from the original setup
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace the mating part before installation

This surface burner head replaces a worn or clogged top burner on gas ranges and cooktops, restoring a steady, even flame and reliable ignition so your burners heat consistently for everyday cooking.

• Mixes gas and air to produce the cooking flame
• Works with the igniter to light the burner
• Directs flame evenly around cookware
• Common symptoms: weak or uneven flame, yellow tipping, delayed ignition or no light, soot, or popping noises

• Disconnect electrical power and shut off the gas; allow the cooktop to cool completely
• Remove grate and burner cap; take out the mounting screw(s) and lift off the old burner head
• Align the new head with the igniter and orifice holder; reinstall screw(s) and the cap
• Restore gas and power; test ignition and verify a clean, even flame

• Many models use different burners by position and output; match the exact part number for the correct location
• Clear clogged ports with a soft brush or compressed air—do not enlarge ports with pins or drill bits

This mounting bracket secures and supports appliance components, providing a stable attachment point to keep parts aligned and reduce movement during operation. It's a simple, durable metal bracket used where a fixed support is required. What it does:

• Provides a secure attachment point for panels, assemblies, or internal components
• Keeps parts aligned to prevent vibration, noise, or rubbing
• Restores proper fit and function when a bracket is bent, cracked, or missing
• Compatible with OEM mounting locations that accept this bracket style

• One mounting bracket

• Turn off power and disconnect the appliance before beginning any repair
• Use appropriate fasteners and torque to match the original hardware; replace any damaged screws
• Handle sharp edges carefully and wear gloves to protect your hands

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.