Parts for Kitchenaid KSIB900ESS2: Cooktop Parts

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

This is a replacement cooktop glass surface designed to restore the smooth, cookable top on compatible electric range cooktops. It gives you a clean, even surface for pots and pans and repairs cracked or damaged glass. What it does:

• Replaces a cracked, chipped or badly scratched glass cooktop surface
• Restores a flat, stable cooking area for proper cookware contact
• Helps prevent heat loss and uneven heating caused by a damaged top
• Improves appliance appearance by replacing discolored or crazed glass

• One replacement cooktop glass surface

• Disconnect power to the appliance before beginning work
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation may require removing burners, trim pieces, and fasteners; have basic tools and a second person to help lift
• Follow the range service manual or instructions for correct alignment and torque of mounting hardware

This single hotplate is the surface heating element used on compatible electric ranges and cooktops to provide a reliable cooking surface. It replaces a damaged or non-working element so burners heat properly again. What it does:

• Heats cookware on the cooktop for boiling, frying and simmering
• Replaces elements that fail to power on or produce heat
• Restores even heating when an old element heats unevenly or flickers
• Works with the existing burner receptacle and wiring on compatible ranges

• Disconnect power to the appliance at the breaker before servicing
• Allow the cooktop to cool completely and use gloves to avoid cuts
• Handle electrical terminals carefully; verify tight connections during reassembly

A single hotplate replacement that restores even surface cooking and reliable heat transfer for electric ranges. Designed to mount in the cooktop so pans heat properly and cooking performance returns. What it does:

• Heats cookware on the cooktop surface for boiling, frying and simmering
• Replaces a cracked, warped or visibly damaged hotplate element
• Restores consistent heating when a burner no longer warms or heats unevenly
• Works with the existing burner housing and controls when installed correctly

• Disconnect power to the appliance before starting any work
• Allow the cooktop to cool completely and handle the element by insulated edges
• Verify mounting hardware and wiring connections are secure and match the original
• Test the burner at low and medium settings after installation;

The Display Board is an OEM component specifically designed for Whirlpool ranges. It is the interface that provides users control over critical range functions like temperature, timers, and cooking modes through an integrated screen and buttons.

Symptoms of a bad display board include:

• Frozen or unresponsive touch controls  
• Dimmed or flickering screen backlighting
• Inability to properly adjust temperature settings

Common causes are related to heat exposure fatiguing sensitive electronic components over time. Water intrusion from steam or spills can also damage circuitry. 

This OEM replacement display board directly replaces the original, fully restoring the range's interactive programming features. Compatible models include those from brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge and Roper. 

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

This anchor tip secures the washer agitator to the transmission shaft so the agitator turns with the washer drive. Replaces a worn or damaged anchor tip to restore proper agitator engagement and reduce slipping. What it does:

• Secures the agitator to the drive shaft so the agitator rotates with the motor
• Helps prevent the agitator from slipping or spinning independently
• Commonly used when the agitator feels loose, makes grinding or clicking noises, or stops agitating
• Simple, low-profile part that works behind the agitator cap

• One anchor tip

• Disconnect power and water before starting any repair
• Remove agitator/agitator cap to access and replace the anchor tip per OEM instructions
• Inspect mating surfaces and replace any additional worn components if engagement remains poor

This trim vent replaces a damaged or worn vent grille to restore proper airflow appearance and help direct air where the appliance needs it. It's a direct-replacement exterior trim piece that cleans up the unit's vent opening. What it does:

• Covers and protects the appliance vent opening while providing a finished appearance
• Directs airflow and helps prevent debris from entering the vent area
• Replaces cracked, broken, or faded vent trim that affects appearance or fit
• Helps reduce rattling or loose trim that can occur with damaged vent pieces

• One trim vent (single grille piece)

• Disconnect power to the appliance before beginning any work
• Typically installs with snap-in tabs or a few screws; avoid forcing to prevent breakage
• Inspect surrounding clips or screws and replace if worn for a secure fit

This end cap is the outer trim piece that finishes and protects the edge of a appliance panel, restoring a clean appearance and helping keep the panel properly aligned. Ideal for replacing a cracked, missing, or worn end cap. What it does:

• Covers and protects the outer edge of a control or access panel to prevent snagging and moisture intrusion
• Helps hold the panel edge flush for a finished look and proper fit
• Replaces cracked, broken, or otherwise damaged trim that affects appearance or panel alignment
• Matches the OEM shape and attachment points for a direct replacement when part numbers match

• Disconnect power to the appliance before starting any repair
• Usually installs with a few screws or snap clips; keep hardware from the original part when possible
• Handle edges carefully to avoid scratching adjacent surfaces during installation

This Bumper is an OEM part for Whirlpool ranges. Serving as a protective barrier, it cushions and safeguards various parts of the range. Engineered to fit seamlessly, it ensures stability and protection for specific range models.

What causes a bad part:
Continuous use, exposure to heat, or physical impact can lead to wear and tear of the Bumper. Harsh cleaning agents or abrasive materials during maintenance can also contribute to its degradation.

Symptoms for a bad part:

• Loose or detached bumpers
• Visible cracks or damage on the bumper
• Increased vibration or instability in the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This electronic control board manages the appliance's electronic functions and user interface, restoring normal cycle selection, timing, and display behavior when the original board fails. Replaces a faulty control for reliable operation. What it does:

• Receives inputs from the control panel and sends signals to start cycles and operate components
• Regulates timing, cycle selection, and display/indicator functions
• Common symptom: touchpad or buttons unresponsive or display blank/erratic
• Common symptom: appliance stops mid-cycle, won't start, or shows control-related error codes

• Disconnect power to the appliance before starting any repair to prevent shock
• Handle the board by edges and avoid touching circuitry; use anti-static precautions if available
• Installation typically requires removing the console or control housing and reconnecting wiring harnesses

This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.

• Covers and diffuses the indicator light for clear visibility
• Fills the control panel opening for a finished, factory appearance
• Helps shield the opening from dust, splashes, and contact
• Common fixes: cracked, missing, loose, or discolored indicator lens

• Disconnect power by unplugging the appliance or switching off the breaker before servicing
• Access the control panel/backguard per your model's instructions
• Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
• Restore power and verify the indicator light is visible through the lens

The User Interface Board is an OEM replacement part for Whirlpool ranges. It is the electronic circuit board located inside the control panel that operates and monitors all input and output functions. This includes powering the display and buttons as well as receiving signals to control oven/stove functions like temperature, timers, and lights.

Causes of a bad user interface board can be due to normal wear over time exposing its sensitive electronic components to heat, moisture, or power surges. Cracks, shorts or failures in the circuitry may develop. 

Symptoms of a bad user interface board include: 

• Faulty or unresponsive control panel buttons
• Incorrect or fluctuating oven/stove temperatures  
• No operation of interior lights or functions
• Error codes appearing on the display

This board is also compatible for use in Maytag, Jenn-Air, Amana, and some Kenmore ranges.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

Replacement gasket that restores a tight seal to the appliance door and helps prevent water or air leaks. Replaces worn, cracked, or compressed seals so the door closes properly and reduces moisture or heat loss. What it does:

• Seals the door opening to stop leaks of water, steam, or heated air.
• Helps maintain proper temperature and efficiency by preventing air exchange.
• Reduces condensation, odors, and cycling caused by a poor seal.
• Common signs you need this part: visible gaps or damage, leaks around the door, excess moisture, or poor heating/cooling performance.

• Disconnect power and water (if applicable) and allow the appliance to cool before starting.
• Clean and dry the mating surface to ensure a proper fit; remove old adhesive or debris.
• Align the gasket into the door channel or groove and press evenly; avoid stretching the material.
• If the door or mounting hardware is bent or damaged, repair those parts before installing the gasket.

This wire harness is an OEM-style electrical connector assembly that routes power and signals between components, restoring reliable electrical connections for safe operation. It replaces damaged, burned, or frayed wiring to help the appliance function correctly. What it does:

• Carries power and signal connections between control boards, motors, switches, and sensors
• Replaces worn, damaged, or corroded wires and connectors that can cause intermittent operation
• Helps eliminate wiring faults that can cause components to stop responding or appliances to lose power
• Restores factory routing and connector fit for secure electrical connections

• Disconnect power to the appliance before starting any repair to avoid shock hazard
• Note connector locations and wire routing; replace like-for-like to maintain OEM function
• Handle connectors gently and ensure full seating to prevent poor contacts

The Noise Filter is an OEM part for Whirlpool built-in wall ovens. It is installed inside the oven cavity near components that produce vibrations, such as the convection fan motor. 

Causes of a faulty noise filter include the degradation of noise-dampening materials over many heating and cooling cycles. Physical damage from accidental impact during cleaning could also compromise its sound-blocking ability.

Symptoms of a bad noise filter include: 

• Excessive buzzing or humming noises emitted from the oven cavity
• Louder than normal fan or component sounds carrying into the kitchen
• Vibrations felt externally on the oven chassis during operation

This OEM replacement fits several Whirlpool, KitchenAid, and Jenn-Air wall oven models.

The Keypad Wire Harness is an OEM part for Whirlpool ranges. This component is essential for connecting the keypad to the control board, enabling communication between user inputs and the range's operational functions.

Causes of a bad keypad wire harness can include wear and tear from regular use, exposure to heat and moisture, or physical damage due to mishandling or accidental impact. Electrical issues such as short circuits or frayed wires can also lead to malfunctioning.

Symptoms of a bad keypad wire harness include:

• Unresponsive keypad buttons
• Intermittent or inconsistent range operation
• Error codes related to keypad communication
• The range not powering on or off correctly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.