Parts for Poulan PP428C: Cylinder / Crankcase / Fuel Tank Parts

This is an airbox knob assembly that is included as a part of many trimmers for lawn and garden use. It consists of a plastic knob that acts as a handle and a threaded metal shaft. The purpose of this component is to ensure the air filter cover is kept secure to protect the filter inside. The airbox knob assembly can become damaged or lost through regular use. If it is missing or broken, it will need to be replaced.Replacing the airbox knob assembly does not require tools, but a pair of work gloves are useful to protect the hands. The trimmer should be powered off and placed on a level surface before starting the replacement process. Next, make sure the spark plug wire has been disconnected to prevent the engine from turning on. Locate the broken or damaged airbox knob assembly and remove it from the trimmer. The new part can be installed in the same location.This component is sold as an individual part. It is designed to be used with trimmers manufactured by Husqvarna and Poulan. The airbox knob assembly is an authentic OEM replacement component that is directly sourced from the manufacturer.

This replacement part is an insert airbox intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Insert airboxes are an important part in this appliance as they allow the air to be pushed out of the machine so it is able to run smoothly.A new insert airbox might be needed if the current one is worn down or broken in any way. It is possible that the airbox might become filled with dust and debris overtime and it should be replaced if cleaning is not an option. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This carburetor assembly is used in lawnmowers and is part of the engine. This part is one of the most important parts of the machine and is responsible for allowing it to run smoothly and efficiently. A new carburetor assembly might be needed if the current lawn mower engine is slow to start, slow to stop, or won't start at all. This can be due to a bad carburetor and create problems within the engine. Be sure the appliance is completely powered off before replacing this part. work gloves are recommended to ensure safety during any type of work.This carburetor is sold as a single piece and is a genuine OEM replacement part. This is also sourced directly from the manufacturer.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

This replacement part is a rear plug and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This rear plug is used in line trimmers or edgers and is an important part of the overall use of the appliance. A new rear plug might be needed if the current one is damaged in any way including being dented, cracked, chipped, or snapped. Be sure the appliance is powered down to ensure proper safely during a repair. It is recommended that work gloves are worn during the replacement of the rear plug. Refer to the proper manual for more detailed instructions on how to replace this part. This is a genuine OEM replacement part sourced directly from the manufacturer. This rear plug is sold as a single piece.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.