Parts for Briggs & Stratton 195707-0111-01: Cylinder, Crankshaft, Piston, Head, Sump, Counterweight, Oil, Gasket Kits Parts

This high-quality replacement oil seal prevents oil from leaking where the camshaft exits the crankcase. The camshaft is made of many rotating metal pieces, and while the engine is running, it creates a stupendous amount of thrashing. To keep these parts from rubbing together and overheating, the camshaft needs a good amount of oil. This oil seal helps maintain the right balance of oil in the camshaft. Oil seals can degrade over time after having hot oil repeatedly splashed on them. The most common problem with an oil seal is that it has shrunk or warped and will no longer make a true seal. When this happens, the oil will leak from the engine and the camshaft will begin to overheat. The difficulty of this repair will depend on the lawn appliance that needs repair, but expect to remove the camshaft in order to replace the seal. This part is compatible with engines made by Toro, Lawn Boy, and Briggs & Stratton. It comes sourced from its original manufacturer and ships individually.

Prevents oil leaks around the crankshaft in small gas engines. Replace if oil seeps from the bottom of the engine. Verify fit with your model number.

Fix oil and coolant mixing or overheating with this engine cylinder head gasket. Seals combustion between block and head. Moderate DIY repair.

Fix exhaust leaks and pressure issues with this engine breather gasket. Creates a seal for proper gas flow and valve pressure regulation in lawn equipment.

This crankcase gasket is a genuine Midwest Engine part, sold individually. This crankcase gasket can be used as a replacement part in snowblowers, lawn mowers, and lawn tractors. The function of the crankcase gasket in these tools is to seal off the crankcase so that oil cannot leak out of it and dirt and debris cannot accumulate inside of it. A broken, malfunctioning, or loosened crankcase gasket can result in the accumulation of dirt, debris, and pebbles inside the crankcase and the crankshaft of outdoor appliances, which can cause damage to the engine; additionally, oil leakages can occur if the crankcase gasket is loose or damaged. If either of these symptoms is the case, this genuine OEM replacement part should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This crankcase gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Cub Cadet, and Lawn Boy.

Seals space between engine components to prevent leaks. Replace if current gasket is missing, damaged, or causing oil/fuel leaks. Verify fit with your model.

Replacement mounting screw for small engines. Secures engine components and covers. Order a new screw if yours is stripped, missing, or damaged.

Fix oil leaks or perform routine oil changes with this engine oil drain plug. Threads into the oil tank base for secure drainage. Simple DIY repair.

Prevents oil leaks around the crankshaft in small gas engines. Replace if oil seeps from the bottom of the engine. Verify fit with your model number.

Engine won't restart after hitting an object? A sheared flywheel key is often the cause. This small part keeps the flywheel connected to the crankshaft.

This part is a replacement valve retainer. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It can be used to replace a broken or defective valve retainer in a variety of small engine power equipment. The valve retainer helps to make sure that the valve spring stays securely locked into place. This ensure the engine is held securely together so the user does not have any issues running the equipment. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this valve retainer, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this valve retainer is suitable for use on several different models of small engine power equipment manufactured by Midwest Engine. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Valve keeper for lawn and garden engines. Secures valve spring retainer to valve stem. Replace if broken, cracked, or missing during engine rebuild.

Seals the intake manifold to prevent air leaks and ensure proper engine performance. Replace if cracked, brittle, or causing rough idle. Confirm fit with your model number.

Seals and protects engine connections to prevent oil leaks. Replace when cracked, brittle, or leaking. Verify fit with your engine model number.

Complete engine gasket set seals critical engine components to prevent oil and air leaks. Replace when rebuilding your engine or if gaskets show wear. Verify fit with your engine model number before ordering.

Replacement mounting screw for small engines. Secures engine components and covers. Order a new screw if yours is stripped, missing, or damaged.

Dipstick tube seal prevents oil leaks and keeps air out of the crankcase. Replace if oil seeps around tube or seal shows wear. Verify fit with model.

Engine won't start or runs rough? A cracked or missing spark plug boot causes misfiring and prevents proper ignition. Easy DIY replacement part.

This replacement exhaust gasket is an authentic OEM part for a snowblower or lawn tractor engine. On these appliances, the exhaust is located quite near to the air filter, meaning that there is a chance that exhaust could leak into the carburetor. The carburetor requires fresh air to oxygenate fuel for combustion, so manufacturers install a gasket to help seal off the exhaust. Once installed, gaskets exist under a lot of pressure and will absorb the heat of the engine. These stresses cause gaskets to slowly degrade and eventually break their seal. If the exhaust gasket blows, the engine will not perform as it should. Be cautious of a noisy engine that burns more fuel than usual and gives off a burning smell. These are signs that the exhaust gasket has given out. If so, use a socket wrench and wrench set to disassemble the blower and air filter housings, then remove the exhaust manifold and change out the broken gasket. This high-quality replacement exhaust gasket is compatible with engines made by Toro, Husqvarna, Briggs & Stratton, and Snapper. It comes sourced from the original manufacturer and ships individually.