Parts for Poulan 3750: Cylinder / Flywheel Parts

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced screw in a variety of chainsaw models. This screw is a high-quality piece of standard hardware that has multiple potential uses. Its primary purpose is to replace similar screws on chainsaw models. Screws are important for securing the equipment. It's best to use screws sourced from the manufacturer to ensure a proper fit. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this screw is suitable for use on several different models of chainsaws manufactured by Husqvarna and Poulan. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a washer. This is a genuine replacement part made by Husqvarna. Washers are small but important to the overall workings of the machine. This part works with other small pieces such as nuts and screws to keep parts in place and in working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers can endure a large amount of friction over time and can become stripped as a result. If this is the case, be sure to replace the part as it might not work as effectively as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This muffler cover is a genuine Husqvarna part, sold individually. This muffler cover can be used as a replacement part for a chainsaw. The purpose of a muffler cover for a chainsaw is to cover the area of the muffler so the muffler is always protected from damage while the appliance is in operation.The muffler cover of a chainsaw might have to be replaced if it is damaged to the point that it cannot serve its function; this could occur if the muffler cover is torn, ripped, cracked, punctured, or eroded. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler cover is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a gasket kit. These gaskets are used in lawn mower engines to help the machine start and stop effectively.A new gasket kit might be needed if the current one is visibly damaged or has parts missing. If the user hears unusual noises coming from inside the machine, it can be due to a malfunctioning gasket kit. Be sure the engine is completely shut down before attempting to replace or repair this part.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a piston ring. This is a genuine replacement part made by Husqvarna. This part is important in any type of machine that uses fuel or gas. The ring is able to maintain the compression between the cylinder wall and the piston so that the engine is able to run smoothly and effectively. A new piston ring might be needed if the current one is missing or damaged in any way including being dented or cracked. It is not uncommon for piston rings to become stripped down over time due to friction and engine use. Normal wear and tear might cause this part to be replaced. Work gloves are recommended when repairing parts near the engine. This part is sold individually and is sourced directly from the manufacturer. This piston ring is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.

This replacement part is a gasket kit. These gaskets are used in lawn mower engines to help the machine start and stop effectively.A new gasket kit might be needed if the current one is visibly damaged or has parts missing. If the user hears unusual noises coming from inside the machine, it can be due to a malfunctioning gasket kit. Be sure the engine is completely shut down before attempting to replace or repair this part.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.