Parts for Husqvarna 41: Cylinder / Shield / Clutch Cover Parts

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This replacement part is a chain brake. This is a genuine replacement part made by Husqvarna. This part is typically located at the top of the handle on the chainsaw. The brake is used to stop the chain from rotating around the bar, thus protecting the user while the chainsaw is running. A new chain brake might be needed if the current one is damaged or misplaced. This can be due to normal wear and tear over time or from a singular incident causing it to need replacing. Be sure the appliance is powered off as the chain can be dangerous and cause harm if precautions are not taken. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a chain brake. This is a genuine replacement part made by Husqvarna. This part is typically located at the top of the handle on the chainsaw. The brake is used to stop the chain from rotating around the bar, thus protecting the user while the chainsaw is running. A new chain brake might be needed if the current one is damaged or misplaced. This can be due to normal wear and tear over time or from a singular incident causing it to need replacing. Be sure the appliance is powered off as the chain can be dangerous and cause harm if precautions are not taken. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

This replacement part is a chain brake. This is a genuine replacement part made by Husqvarna. This part is typically located at the top of the handle on the chainsaw. The brake is used to stop the chain from rotating around the bar, thus protecting the user while the chainsaw is running. A new chain brake might be needed if the current one is damaged or misplaced. This can be due to normal wear and tear over time or from a singular incident causing it to need replacing. Be sure the appliance is powered off as the chain can be dangerous and cause harm if precautions are not taken. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a piston ring replacement that is used for several types of outdoor tools and equipment. The piston ring is used to create a seal between the piston and the cylinder. The seal formed by the piston ring separates the crankcase and the combustion chamber to ensure there is proper compression in the engine. The piston ring can start to wear down or even break after a substantial amount of use. When there is any type of damage to the ring, owners should have it replaced immediately. Problematic piston rings will mean the seal is broken, which will then result in a loss of compression and performance problems with the engine. This genuine OEM piston ring is compatible with more than 150 different models. The ring is made with a 36 chromium-ceramic coating. It is sold individually and is typically used for chainsaws. It could also be used for some pole pruners and trimmers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman.

This piston pin retainer is an authentic OEM replacement part sourced directly from the manufacturer for use on gas-powered chain saws. This retainer holds the pin that connects the connecting rod and piston. This is a small metal ring that has an opening on one side. It should be replaced anytime the piston is accessed. When it is taken off during repairs, it loses its compression and should be replaced.Take the spark plug out to make sure the saw cannot be started. Refer to the chainsaw's model diagram for the exact location of the piston ring. Remove the side cover, bar, and chain from the saw. Take the top cover off and set the screws aside. Next, remove the starter assembly and top handle, then the clutch drum and clutch with a clutch removal tool. Continue to disassemble the saw until the piston is visible. Use needle-nose pliers to remove the piston pin retainer and install the new one. Reverse the steps to reassemble the chain saw. Reinstall the spark plug and check the chainsaw for proper operation.This piston pin retainer is a quality metal part that is sold individually. It is designed for use in chainsaws manufactured by Poulan, Husqvarna, and Jonsered.