Parts for Maytag MHW8630HC2: Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement hose restores a sealed, reliable path for water or air inside your appliance. Swapping a worn or cracked hose helps stop leaks and corrects performance issues so cycles fill, wash, and drain the way they should.

• Routes water or air between internal components to maintain proper operation
• Maintains a sealed connection to help prevent leaks
• Kinks, cracks, or clogs can cause water under the unit, slow/no fill, or drain problems
• Replacing a damaged hose helps restore normal cycle performance

• Disconnect power and shut off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note original routing and clamp locations; transfer clamps if reusable
• Fully seat the hose on each fitting, secure per OEM guidance, and test for leaks after installation

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the filling cycles. This valve ensures that the correct amount of water is delivered to the tub, allowing for optimal washing performance.

Causes of a bad water inlet valve can include mineral buildup, electrical issues, or wear and tear from regular use.

Symptoms of a bad water inlet valve include:

• The washer not filling with water
• Slow filling or incorrect water temperature
• Water leaking from the valve
• The washer filling continuously or not at all

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement hose routes water between internal components, maintaining a secure, leak-resistant path so your appliance can fill, circulate, and drain as designed. Replacing a damaged or clogged hose restores proper water flow and helps prevent leaks.

• Transfers water between components; correct routing and clamping keep connections sealed
• Common failure signs: leaks, kinks, cracks, soft spots, or internal blockages
• Helps resolve: water under the unit, standing water or slow draining, fill/drain error codes, and musty odors from trapped water

• Disconnect power and shut off the water supply before servicing
• Place towels or a shallow pan to catch residual water; note original routing and clamp positions
• Inspect/replace clamps if worn; fully seat the hose on fittings and tighten clamps securely
• Run a test cycle and recheck all connections for leaks

This motor-pump is the combined motor and drain pump assembly that removes wash water during drain and spin cycles, restoring proper discharge and helping prevent standing water in the tub. Fits applicable Whirlpool washer models. What it does:

• Drives the pump impeller to expel water from the washer during drain and spin cycles.
• Commonly replaces units that are noisy, humming, or fail to start when draining.
• Stops leaks or poor drainage caused by a failed pump motor or damaged impeller.
• Restores normal cycle completion when the washer is not draining or shows error codes related to drain faults.

• One motor-pump assembly.

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Turn off the water supply and drain any remaining water before removing panels.
• Check and clear drain hose and pump inlet for foreign objects before replacing the assembly.
• Follow the OEM service manual for model-specific removal and mounting steps; ensure all electrical connections are secure and properly routed.

The Dispenser Metering Pump is an OEM part for Whirlpool washing machines. It dispenses laundry detergent at timed intervals during wash cycles.

Causes of a bad metering pump can include worn gears, seals or valves that result in improper detergent dispensing. Mineral buildup or internal blockages over time can also lead to malfunction.

Symptoms of a bad metering pump include:

• Detergent not being fully or evenly dispensed during wash cycles
• Residual detergent left in the drawer after wash completion
• clothes failing to get fully cleaned due to insufficient detergent dosage

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement drain hose routes wastewater away from the appliance so it drains properly and helps prevent backups or leaks. It's a direct-fit plumbing hose used where the original hose is worn, cracked, or leaking. What it does:

• Carries wastewater from the appliance to the household drain or standpipe
• Replaces cracked, split, or collapsed hose that causes slow draining or leaks
• Restores proper water flow to prevent water buildup in the tub or pump area
• Works with existing clamps or connectors designed for the original hose

• Disconnect power and turn off water supply before starting any work
• Inspect and reuse or replace hose clamps as needed for a secure, leak-free connection
• Route hose following the original path and secure to prevent kinks or sharp bends
• Test for leaks after installation by running a short cycle and checking all connections

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Detergent Dispenser Drawer is an OEM part for Whirlpool washers. This drawer is designed to hold and dispense detergent, fabric softener, and other laundry soaps during the wash cycle.

A bad detergent dispenser drawer can be caused by clogging, damage, or improper operation. If you notice issues such as the drawer not opening or closing smoothly, leaks or drips from the dispenser area, or improper dispensing of detergent or fabric softener, it may indicate a problem with the detergent dispenser drawer.

Symptoms of a bad detergent dispenser drawer include:

• Difficulty in opening or closing the drawer
• Leaks or drips from the dispenser area
• Improper dispensing of detergent or fabric softener
• Visible cracks or damage on the drawer

Replace your faulty detergent dispenser drawer with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This dispenser housing replaces a damaged refrigerator door dispenser to restore a stable outlet for water and ice and help stop leaks or cracked mounting points. Fits factory mounting locations and restores proper dispenser function. What it does:

• Provides the outer housing that channels water/ice from the dispenser to the user.
• Supports the dispenser lever/actuator and secures door seals to prevent leaks.
• Common symptoms replaced: cracked or broken dispenser housing, leaking at the dispenser, or a loose/unstable dispensing area.
• Works with original mounting points so the dispenser components seat correctly.

• Disconnect power and shut off the water supply before beginning work.
• Remove the refrigerator door trim/panel per your model's instructions to access the old dispenser.
• Handle clips and edges carefully to avoid damaging the door or new housing; replace any worn gaskets or seals.
• After installation, restore power and water, check for leaks, and test dispensing operation.

The Cover is an OEM part for Whirlpool washing machines. It is a protective outer casing located on the external components of the machine. The durable cover protects internal mechanisms, hoses, and other parts from debris, moisture, and accidental damage. It also contributes to the overall aesthetic appeal of the washer.

Symptoms of a bad cover can include cracks, dents, missing pieces, or warping that compromise the protective barrier. Without an intact outer shell, internal parts are more susceptible to corrosion or premature wear over time. 

Symptoms of a bad cover include:

• Gaps or openings that allow air/moisture inside the cabinet   
• Loss of an attractive, finished appearance
• Difficulty accessing internal components for maintenance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement sensor switch that detects door/operational status and signals the appliance control, restoring normal cycle recognition and user-interface responses. Fits as the same form-and-function replacement used by the manufacturer. What it does:

• Detects door/operation state and sends signal to the main control to allow cycles to start or continue
• Commonly replaces a failed sensor that prevents the appliance from starting or advancing cycles
• Helps resolve intermittent control or display errors tied to a non-responsive sensor
• Functions as an electrical input to the control board; does not include wiring harness unless listed

• One sensor switch

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the switch and connector terminals carefully to avoid damage to wiring and contacts
• Verify correct connector orientation and secure mounting before restoring power

The Hose is an OEM part for Whirlpool washing machines. It is a gasket or seal located inside the machine that protects internal components from leaks or damages. The hose washer plays an important role in sealing hoses and pipes to prevent water from escaping during rotation, agitation, and drain cycles. 

Causes of a bad hose include cracks, tears, or warpage over multiple usage cycles which allows water to bypass intended drainage paths. When this occurs, it can lead to excess moisture inside the washer cabinet. 

Symptoms of a bad hose include:

• Water leaks underneath or around the washer
• Puddles or standing water inside the washer cabinet 
• Slow or ineffective draining during washing cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.