How to Troubleshoot & Replace Frigidaire AP3837282 / 134372300 Dispenser To Tub Hose

Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible part that could show mold, the drain hose and drain pump to drum hose were by far the dirtiest, and must be washed or replaced if trying to eliminate smells. The whole project took me 3-4 hours to complete (I have done washing machine repairs before), but the machine runs and smells like new. Note: The included spring retainer tools were extremely helpful when putting the door boot seal back together. 

Found top hose (where the detergent goes into the drum) had cracked and was leaking water. ordered new part and changed it out. The screw clamps were a pain to get to. I was able to slid the vent tube out of the way for a little more room. If you have a flexible driver extension that will help. 

Replaced the dispenser to the tub hose that connects the fill tray to the tub. 

Perfect, took about 30 min and I'm no mechanic. 

Took it apart, located ripped boot on rear of tub. While taking apart noticed both shocks holding up tub where broke(front loader). Went online found all parts at appliancepartspro, ordered next day delivery. Parts showed up next day at 3pm, perfect fit. Installed parts, did load of laundry no leaks! Wife was very happy. P.S. I called store I purchased washer from.....50 bucks more on total sale. Price great, parts great, and how can you beat next day delivery! Thank you 

We replaced several parts. Initially the door latch fixed the problem, but not permanently. We found a leaking hose and a broken shock. Those were also replaced. Very, very happy with the prices, quality and quick shipping. 

I had a hose at the top leaking water. This is the hose that dispenses the soap by spaying water in the tray and down the hose. I think it was getting other electrical parts wet. I temporarily glued the hose and it work until the glue gave way. I have ran 5 loads so far with the new hose on it. Either way the hose needed to be replaced. We shall see.