How to Troubleshoot & Replace Ge AP4484273 / WB27T11162 Board Housing Asm

With the help of AppliancePartsPros I replaced the board, face plate and sticker. 

After consulting with web site I ordered a replacement Board for my GE wall oven. The board arrived in 2 days. The whole installation process took less than 30 minutes, but the board itself took less than 5 minutes to install. I removed 3 nuts from the bottom of the face plate, I took a photo of installed Board with my smart phone. I peeled the template cover off of the old Board and attacked to the replacement Board. (Hint I used baking rack as rest for Boards as I swapped out connections.) I then one at a time moved each connection from the old board to the replacement Board. I did a final check and compared the photo to the wired replacement Board. The hardest part was to get the oven face plate to reattach to the oven. Since that time I did the "Biscuit Test" to calibrate the temp of the oven. My wife and I have now baked several items in the oven, all of have turned out fine. We will bake a cake later this week for the final test, but we are confident that this had fixed our problem. 

We ordered the new Control panel and was resolved. Coustumer service was a big help. 

-I checked resistance values on the temp sensor, bake and broil elements. -Everything checked out fine, so I contacted AppliancePartsPros by submitting a question. It was answered within minutes and they recommended replacing the control board at that point. -I ordered a control board and new faceplate and they arrived the next day. -I installed the faceplate onto the board and installed it. Though I didn't need it, I bought the new faceplate to simplify installation of the control board and I feel that it was worth the extra cost. -The oven then worked alright and was tested immediately by baking some french fries at 425F. The toughest part of the process was taking the oven out of the wall and removing things to do resistance checks. The control board removal and installation was actually quite easy, but the other things need to be checked first. 

Bought the retrofit package and had a friend remove the old panel and face plate and replace it with the new one I bought from you. 

We replaced the probe first and then realized the clock board was burned. W.e received these parts very quickly.