Nicholas P Cincinnati , OH July 22, 2016 The area around the bleach cup in the top of the washing machine was rusted and was staining clothes A few screws and a it was fixed. Really a very simple fix. Four star bit screws on the back of the control panel. Then I used a putty knife to slide between the top and the front cover to get the front cover popped off. After that it was two screws to get the top off. Took the lid sensor off and then worked to take pieces off the old top that needed to be attached to the new top. This included the old lid. Thanks for the great price and part! Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Robert G Royersford , PA November 29, 2023 Appliance: Model GE WASHER. Rusted out top especially at the bleach inlet.. Replaced the old one with a new washer top. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Michaelean E Hammond , IN August 04, 2021 It was rusted out at bleach dispenser. Inside and outside of top cover panel. By taking apart the control panel, the front panel and unplugging the wire harnesses. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Thomas L Gastonia , NC May 07, 2021 Appliance: Model G E WASHER Rust on cover assembly finish Purchased new cover assembly finished, replaced with new one. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Socket Set
William C Bolivia , NC August 09, 2019 Appliance: General Electric Washer WJRR4170G0WW Rusty cover assembly. Replaced with new cover. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Nathaniel K Geneseo , NY April 23, 2018 Appliance: General Electric Washer S3600D0WW Water leak We have an older machine that is not "high efficiency". after looking at new machines I determined I wanted to repair mine. Most challenging part was the nut was severely corroded on the top of the transmission. The spanner wrench just rounded it off. I ended up carefully drilling down through the nut and then using a sharp screwdriver to split it and pried the pieces out. You have to be careful not to damage transmission threads or the tapered seat on the drum. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Screwdrivers, Socket Set, Wrench Set