How to Troubleshoot & Replace Ge AP2020944 / WB15K5076 Oven Door Handle

Took off old parts and fastened new ones on. Not as difficult as I thought it would be. 

Had a little trouble getting the correct part number, but with the help of Appliance Parts Pros very knowledgeable customer service. The correct part was ordered. Removed two screws to access inside panel of door. These screws also secure the door handle. Removed an additional 4 screws to completely remove the old handle. Assembled the new door handle consisting of three pieces. Attached the door handle to the outside of the door with the four screws. My oven door had alignment holes for the alignment pegs that are located on the door handle assembly. Then close the inner panel and fasten with the two remaining screws. The handle has locating pegs on it, so when the panel is closed the two remaining screw holes on the panel should align with the additional holes on the handle that accept the two remaining screws. 

Remove 2 screws from liner to handle, remove 4 screws from bottom of door attaching panel to liner. Lift panel from liner and lay out with inside facing up. Remove one screw from each side of panel attaching handle end cap. Remove handle assembly, replace cap, and reassemble in reverse order. Almond color handle and end caps are no longer available, had to replace entire handle assembly with black, but it looks pretty good. . 

The original handle on my daughter's oven had broken and needed to be replaced. I found exactly the parts I needed on the site, thanks to their detailed exploded parts diagram. The parts arrived in just a few days and fit the oven perfectly. The repair was made without any problem and my daughter now has a new oven handle. Very pleased with the service and the parts. Thanks! 

Ordered the parts and my husband fixed it. 

Replaced both end caps and handle. 

Replaced it 

Replaced parts and installed 

I installed it myself after receiving the oven door handle and two end caps from your store. 

Replaced