Robert C Tucson , AZ April 26, 2014 Appliance: General Electric Refrigerator TFX26KPDAAA The refrigerator door stop was bent to the point that it would no longer keep the door from swinging into the adjacent pantry door I replaced the door stop. Fortunately, I did NOT follow the advice on your Questions and Answers discussion and remove the door to do this: "You will need to remove the door hinge cover and hinge from the top of the door. Then lift and remove the door from the refrigerator. Lay the door on a soft surface and remove the screws holding the door stop WR2X9302 in place. Reinstall in reverse order." The two screws are fairly easy to remove with a socket wrench with the door in place. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Socket Set
Dean C Port Charlotte , FL May 15, 2015 The door would swing wide open and hit the counter the stop unit was broken With the quick service you gave me I had the old part off in no time and the new one on in short order and now everything works fine. Thank you for your quick service. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Socket Set