Robert C Tucson , AZ April 26, 2014 Appliance: General Electric Refrigerator TFX26KPDAAA Ge Refrigerator Tfx26kpdaaa: The refrigerator door stop was bent to the point that it would no longer keep the door from swinging into the adjacent pantry door. How to replace Stop Door Ad. I replaced the door stop. Fortunately, I did NOT follow the advice on your Questions and Answers discussion and remove the door to do this: "You will need to remove the door hinge cover and hinge from the top of the door. Then lift and remove the door from the refrigerator. Lay the door on a soft surface and remove the screws holding the door stop WR2X9302 in place. Reinstall in reverse order." The two screws are fairly easy to remove with a socket wrench with the door in place. 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes