Replaced both hinge assembly and cam riser. Very simple task. Removed power and shutoff house water. Removed ice containers and items stored inside door containers. Disconnected water lines at bottom of the door, then remove top hinge cover, disconnected three electrical connectors, one ground wire and three bolts holding upper hinge door bracket. Lift the door off the lower hinge bracket, placing the door on its side to gain access to upper hinge cam riser, removing screw along with old riser, securing new riser into place. Reinstalled door in reverse order of removal.
Easier if you have someone feeding water hoses at bottom hinge while another holds the door, slowly lowering door onto the lower hinge. The start to finish was half an hour.