How to Troubleshoot & Replace Samsung AP5651791 / DA97-08809C Refrigerator Rail Slide Assembly

Easy repair. Remove drawer. Take cover off wire connection on back of drawer front. Disconnect wire terminal. Remove 4 bolts holding drawer front to both slide assemblies ( 10 mm socket ) and set aside. Remove small sheet metal screw at top front of both slides. Disconnect wire terminal from wall. Hold both slides and pull straight out. Back of slides are held in by tabs that fit into the wall. Slides easily come apart from connecting rod. Installation is in reverse. 15 minute fix. Be sure to check left side as I discovered broken springs that help pull the drawer closed. Drawer works fine for now but I may replace later. 

I replaced the rail-slide assembly. The repair wasn't difficult and took about 15 minutes. The only difficulty I had was finding the correct part. Samsung did not list the part at all based on my model number for a white refrigerator, so I had to look up the part number under the stainless steel model. The new part was identical to the old one in my fridge and works great! 

Replaced the hinge which came with the wire loom assy.