How to Troubleshoot & Replace Whirlpool AP4068298 / 61003647 Refrigerator Door Closer Cam

I replaced both the door closer and hinge pin, and this now makes the door close all the way in a nice slow, controlled, manner. 

Remove the door put another door closer on it again reassembled takes longer take the food out that it does to fix the problem 

Replaced hinge pin and closer. 

Ordered and replaced parts from you. Parts were delivered the next morning after placing my online order. Very impressed! 

Water line to ice maker was frozen. Thawed with a hair dryer and made ice then froze again. Replaced the water inlet valve and it's been working since 

I removed the door by via 4 screws topside. Door weight was as light as a sack of groceries. I placed the door on a couple of large blankets and replaced the bottom side door closer that was held in place with 2 screws. The the refrigerator hinge pin simply lifted out for replacement. Reverse door installation was a breeze. The door now closes like new. Even though I was in no rush, the entire procedure took approximately 12 minutes. I'm extremely happy and have saved $140. Don't kid yourself. Even Maytag's sometime require service. Hey! I'm now an overnight Maytag sensation. Wow... 

I'm not mechanically inclined by any means, but the repair was very easy. I took the food out of the door, then took the door off the hinges by removing the top hinge and lifting the door off the bottom hinge. I put the door flat on the kitchen floor, and replaced the door closer on the bottom of the door. It was pretty obvious what the issue was comparing the old and new door closer. The old door closer had it's little risers (best way to describe it) sheered off. Once the new door closer was in place, I put the door back on the bottom hinge and put the top hinge back in place. Once I bolted everything down and put the food back in, I was good to go.