Maria W Lansdale , PA March 19, 2017 Appliance: Model KENMORE 90 SERIES Dryer was not heating We replace the thermal fuse and its working again. Wahoo it was a simple and quick fix. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers, Wrench Set
Retha B Garnett , KS March 12, 2017 Not heating at all Replaced dryer thermal fuse. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Socket Set
Kyle H New Prague , MN February 27, 2017 Thermal cut out switch failed Removed the old one and replaced with new. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers, Wrench Set
Frank N Pecos , TX February 23, 2017 No high heat Replaced fuse. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Shannon W Killeen , TX February 07, 2017 Clothes were not being dried all the way in one load Replaced the hi temp thermostat and the fuse Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Allan V Henrico , VA January 07, 2017 Appliance: Model AMANA COMERICIAL DRYER Dryer would not provide hot air The problem was realistically only the Dryer Thermal Fuse. I found this out by removing the components and checking them all with an Ohm meter. Since I was going into the lower part of the dryer I decided to replace other parts as the dryer is over 13 years old. Appliance Parts Pros was extremely fast in shipping the parts out. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Socket Set
Rondell R Pontiac , MO June 10, 2016 Thernal fuse was open Replaced the fuse. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Frank G Shokan , NY March 27, 2016 Fuse link blow out Ordered on Mon. received on Tuesday part in Tuesday dryer up and running in three days Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Greg I Jasper , AR March 26, 2016 Appliance: Admiral Electric Dryer ADE7005AYW Admiral elect dryer not heating Replaced: heating element, hi-limit & cycling 1 thermostat along with thermal fuse. Great air flow and ducts clean and free of lint and still doesn't heat up like it should. Checked to make sure I was wired for 240 and it show correct voltage. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
David S Parker , CO February 22, 2016 Dryer did not heat Ordered a Hi-limit Thermostat and Dryer Thermal Fuse and replaced both on the dryer. Not sure which one was bad, but the dryer works and the total bill was $34 and change. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers