Joseph G Miami , FL August 11, 2018 Ice chute door flapper was disconnected from the strike assembly so the flap would not close properly With the parts I ordered from you the fix was easy. Take special note in the video in the replacement of the spring. That made it easy. Also I did not have to disconnect the electrical connections. Just rotate the chute assembly for access. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Steve L Bothell , WA January 14, 2019 Appliance: Jenn-Air Refrigerator JSD2789HES The water and ice dispenser would not stop running when the glass was removed I replaced the actuator pad as the old one was worn and had lost its springiness. Even after replacing it the problem was still intermittent so I installed a spring inside the pad which solved the problem. As long as I had thing apart I also replaced the door flap and center strike bracket which was partially broken. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Robert H Jacksonville Beach , FL September 02, 2022 Appliance: Maytag Refrigerator MSD2432GRW Ice dispenser in the door quit working. Besides the replacement of the center strike and the door flap. I also changed out the solenoid and the dispenser works like new. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Greg H Mesa , AZ September 07, 2020 Appliance: Jenn-Air Refrigerator JS42SEDBDA Ice not dispensing from Jenn Air frig. Two plastic parts were broken. Parts were the lever within the plastic dispencer (called Center Strike), as well as the dispencer housing itself (called the Fountain Bracket). Replacing the two parts has the unit working again. Very reasonable price, and the video on Appliance Parts Pros available to show how the unit was removed/installed (video was specific to spring replacement, but this also shows how the housing is removed). Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Michael O Middlesboro , KY June 25, 2017 Striker broke on the ice machine flapper Ordered a new one and exact fit...easy off and then on. Front panel easy to remove , two screws for the face plate, two screws for the electronic board, two screws for the shaft attachment. Take the spring off the shaft , disconnect the flapper and remove the shaft....then go in reverse order to reassemble everything.... Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Robert I Valrico , FL November 19, 2015 Appliance: Jenn-Air Refrigerator JS42SEDBDA Ice dispenser mechanism broke after 10 years of daily use I fixed it by removing the cover from the door's ice and water dispenser. I then looked for any broken parts. Then I went online to search for the parts I saw had broken. Appliance Parts Pros had the parts I needed at the lowest prices and lowest shipping options. It's very easy to locate the parts from their online diagrams. BTW, the shipping was lightning fast! No, I'm not a refrigerator tech, although I'm handy with tools. And, no, I have no financial ties with Appliance Parts Pros, I'm just trying to help out fellow do-it-yourselfers... Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers